
 PLMJobManager Versions Info: [(c) Dipl.Ing. J.Feuerstein 2005..2026]
 --------------------------------------------------------------------
 Version Full.....: 3.2000.1802.2026
 Version Number...: 2000

 Release Date/Time: 18.02.2026 09:58
 Release by.......: Josef Feuerstein

=== 26.01.2026 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: press "Shift + C" in the JobClient to CleanUp old Job directories

=== 21.01.2026 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: Admin 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: JobClient changed temp job folder root name from 'JobClient' to 'JobData'

=== 21.01.2026 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: Admin JobControl 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: JobClient: before job execution is starts, it will be checked for old job directories to be cleaned up

=== 19.01.2026 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: Scripts/Params. 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: -Action "JobDataExtract_2013_10" -SubAction "InputListExtract"
                    
                    Variable substitution is now case-insensitive.
                    #Exa: if Source Data contains hash var #ObjectName# or #OBJECTNAME# 
                          in both case the replacement will be done.
                    Enhancement implemented by code extensions

=== 16.01.2026 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: JCT 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: -Action "PartUtility_2018_04" -SubAction "EVALUATE"
                    added new parameter 'BOMStatus'
                    if 'ON' the current BOM Status will be written into the result message
                    Possible status values:
                    #NotExists #New #Equal #Updated

=== 12.01.2026 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: ProcessGroups 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: you can now copy and paste a process group to and from the clipboard
                    these options are available under 'Process groups' > 'Extra'

=== 06.01.2026 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: before opening an explorer from the JobClient, it will be checked if a 'JobTemp' folder exists
                    if yes -> this folder will be used to open in the explorer
                    
                    if explorer with the same folder is already open, this explorer will be focused instead of opening a new explorer

=== 20.11.2025 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: Press 'Ctrl + H' in the property collection editor to replace text

=== 07.11.2025 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: implemented new user control for Object Attribute Filters
                    to enhance filter capability and match the other object filters

=== 04.11.2025 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: CheckBox 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: added new lists for tif merge collection files 
                    _TcDatasetUidList.txt -> stores all the datase puid from tif merge collection files 
                    _TcDatasetUidList.txt -> stores all the item reevision IDs from tif merge collection files 
                    _TcDatasetResultsOverview.csv -> stores the object properties and ppm values for tif merge collection files

=== 04.11.2025 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: Exception Issue happend when 
                    Button clicked Object List -> P.Dat -> Res.Msg  
                    Issue is now solved by code changes

=== 05.09.2025 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: added new extended wildcard functionality for CadDataSearch (Drawing Index Search)

=== 02.09.2025 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: changed JobManager UI for correct scaling in windows

=== 15.08.2025 ============================================================================
 - Version........: 3.2000 // A.Stein
 - Categorie......: GUI Import Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: Change: 
 - Description....: Now its possible to turn ImportFs_HashCode on and off in SiteDef Settings
                    Implemented by code extensions, for performance gain

=== 15.08.2025 ============================================================================
 - Version........: 3.2000 // A.Stein
 - Categorie......: GUI Settings 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: Select OpeFileRule from JobManager GUI

=== 20.05.2025 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: GUI ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: added view type selection for drawing index search (in Objects list DRW filter)
                    Nested -> will view the drawing results as nested items of the objects
                    Flat -> will view the drawing results as a flat list together with the object informations

=== 28.03.2025 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: JobControl 
 - Type...........: Change: 
 - Description....: if the path to PLMPerf Settings json file is not available on the JobClient, JobClient won't stop anymore
                    JobClient will now print the following message:
                    ERR: PLMPerfSettings Load: please check if path to PLMPerf Settings json file is available!
                         PLMPerfSettings Load: Waiting 10 seconds --> try to reload settings

=== 11.03.2025 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: Changed default values for "MD.Volume Deviation Result Rules" in CB Settings
                    OK:  0,000 mm^3 - 0,010 mm^3 
                    WRN: 0,010 mm^3 - 0,100 mm^3
                    ERR: 0,100 mm^3 - ...

=== 11.03.2025 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: Changed default values for Component.TranslationMatrix' from 0.00001 mm to 0,001 mm
                    OK:   0,000 mm - 0,001 mm
                    ERR: >0,001 mm - ...

=== 22.02.2025 ============================================================================
 - Version........: 3.2000 // A.Becker
 - Categorie......: CommandLineArgs Settings 
 - Type...........: New: 
 - Description....: New command line argument "/PLMPerf_Root_DP" for JobClient available.
                    Specifies the root directory for the PLMPerfV4 structure. Requires /PLMPerf_ProfileName to be specified.
                    Doc Info: If not set, the environment variable %PLMPerf_Root_DP% will be used if available.
                    
                    #Example: /PLMPerf_Root_DP "V:\JobManager\ProgEntw\Ver03\PLMPerfV4"

=== 18.02.2025 ============================================================================
 - Version........: 3.2000 // A.Stein
 - Categorie......: Scripts/Params. ObjectJobResults Settings JCT CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: Doc: 
 - Description....: ResultClassification extendet with MultiLine Check (MLC)
                    When MultiLine Check (MLC) is activ
                    the result analysis is performed on the basis of multiple lines.
                    Collection of the lines are done by RegEx pattern criteria
                    
                    Enhancement implemented by code extensions

=== 04.02.2025 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Time Sheduler supports now definition TOVerLap=n (sec) 
                    
                    When for example in Scheduler def TOVerLap=120 is set then TimeScheduler evaluation
                    is using 120 sec as MaxTimeOverlab to calulate RightTime(max)
                    
                    #Exa: [TP=10:30 TOVerLap=120] then LeftTi.me(min)=10:30 .RightTime(max)=10:32
                    #Exa:  
                    #Exa: if TPc=10:31:00 OK is returend -> process will be triggerd because TPc is btw. LeftTime(min) and  RightTime(max)
                    #Exa: if TPc=10:29:59 NO is returend -> process will !NOT! be triggerd because TPc is before LeftTime(min)
                    #Exa: if TPc=10:32:10 NO is returend -> process will !NOT! be triggerd because TPc is after RightTime(max)
                    
                    Enhancement implemented by code extensions

=== 18.12.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: Admin 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "SystemTools_2017_07" -SubAction "UserData*"
                    With this methode you can save and restore user data into a File.
                    
                    List of new SubAction:
                      -UserDataInputByUserAndSaveToFile
                      -UserDataRestoreFromFile
                     
                    New Methodes are implemented by code extensions

=== 28.10.2024 ============================================================================
 - Version........: 3.2000 // A.Becker
 - Categorie......: CommandLineArgs 
 - Type...........: New: 
 - Description....: When /PLMPerf_Root_DP and /PLMPerf_ProfileName (%PLMPerf_Root_DP% and %PLMPerf_ProfileName%) are available,
                    the JobClient switches to PLMPerf Configuration mode.
                    In this mode, the ServerSettingsXML is ignored and the service is parsed from the PLMPerf_config.json instead.
                    
                    Alternatively /PLMPerf_ServerNameOrIP [/PLMPerf_ServerTcpPort] (or the same named environment variables) can be used.

=== 28.10.2024 ============================================================================
 - Version........: 3.2000 // A.Becker
 - Categorie......: CommandLineArgs 
 - Type...........: New: 
 - Description....: New command line argument "/ServerNameOrIP" for JobClient available.
                    Specifies the server to connect to by hostname or ip address. 
                    
                    #Example: /ServerNameOrIP "servername"
                    #Example: /ServerNameOrIP "servername.domain.tld"
                    #Example: /ServerNameOrIP "192.168.1.53"

=== 28.10.2024 ============================================================================
 - Version........: 3.2000 // A.Becker
 - Categorie......: CommandLineArgs 
 - Type...........: New: 
 - Description....: New command line argument "/PLMPerf_RootL_DP" for JobClient available.
                    Specifies the root directory for local work data. 
                    Doc Info: If not set, the environment variable %PLMPerf_RootL_DP% will be used if available.
                    
                    #Example: /PLMPerf_RootL_DP "C:\tmp\ProfileX"

=== 28.10.2024 ============================================================================
 - Version........: 3.2000 // A.Becker
 - Categorie......: CommandLineArgs 
 - Type...........: New: 
 - Description....: New command line argument "/PLMPerf_ServerTcpPort" for JobClient available.
                    Specifies the port to be used for /PLMPerf_ServerNameOrIP. Default: 36143 if not set.
                    Doc Info: If not set, the environment variable %PLMPerf_ServerTcpPort% will be used if available.
                    
                    #Example: /PLMPerf_ServerTcpPort 12345

=== 28.10.2024 ============================================================================
 - Version........: 3.2000 // A.Becker
 - Categorie......: CommandLineArgs 
 - Type...........: New: 
 - Description....: New command line argument "/PLMPerf_ServerNameOrIP" for JobClient available.
                    Alternative for /PLMPerf_Root_DP to specify the PLMPerf service server when no access to the configuration file is available.
                    Doc Info: If not set, the environment variable %PLMPerf_ServerNameOrIP% will be used if available.
                    
                    #Example: /PLMPerf_ServerNameOrIP "plmserver.domain.local"
                    #Example: /PLMPerf_ServerNameOrIP "192.168.99.21"

=== 28.10.2024 ============================================================================
 - Version........: 3.2000 // A.Becker
 - Categorie......: CommandLineArgs 
 - Type...........: New: 
 - Description....: New command line argument "/PLMPerf_ProfileName" for JobClient available.
                    Specifies the profile to be used within the PLMPerfV4 structure. 
                    Doc Info: If not set, the environment variable %PLMPerf_ProfileName% will be used if available.
                    
                    #Example: /PLMPerf_ProfileName "CustomerNameShort"

=== 25.10.2024 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: Admin 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: changed download addresses in updater to new web folders

=== 26.09.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: Solving Issue exporting Data to Excel list when data in datagrid where listed in 'Group by Row mode'.
                    Issue is now solved by code changes
                    
                     - more details about export data are printed into InfosSys.
                     - The method for naming export files has been intensively updated.
                       - JobMgr supports now NameSchema as global default 
                       - And also defined by Process Groups ExportDocNameSchema
                       - see ProcessGroup -> "Process Group: default 'Name Schema' when exporting data"

=== 18.09.2024 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: CheckBox 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: removed 7 columns from Attribute_CheckBoxDataCollection.xlsx file
                    Removed Columns:
                    CadVerPre
                    CadVerPost
                    OnSite
                    OnComputer
                    Date
                    Time
                    PacketName

=== 17.09.2024 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: if you switch the process column without reloading the data, it could happen that sometimes the wrong JobLink / JobLog from a different process column has opend
                    Issue is now solved by code changes

=== 29.07.2024 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: Admin 
 - Additional Info: UpdDb=No 
 - Description....: added new query to get CPU utilization for oracle SQL Server from v$sysmetric_history table

=== 25.07.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList Settings 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobServer Enhanced setting for import conditions 
                    
                    see: Sites/Data Import 
                           |-> Import Settings 3 
                                |-> 1 - Import DS Types
                                    |->  1.10-Import Dataset Active
                                    |->  1.11-BOM Analyse check if IR has a BOM
                                    |->  1.12-BOM Analyse get BOM Data do execute
                    
                    This methode is implemented to be able to import only Items+Revision metadata
                    #Doc: if you set 1.10+1.11+1.12=false then only Item+Revision metadata is imported no BOM Analyses will be done
                    New Methode implemented by code extensions

=== 24.07.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: Reports Scripts/Params. ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Application Datagrid enhanced
                    - Columes containing Day Data only are now sortable by day value
                    - all Columes in datagrids shows summary button

=== 03.07.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobClient allows now only to execute one instance at a time
                    pointing to same JobClient root directory.
                    
                    This behaviour avoids: 
                     - unexpected JobClient-JobServer communication
                     - unexpected JobResults
                    
                    In case 2 second start is done: 
                     - a beep is emitted 
                     - a red message is written to the cmd windows 
                     - the cmd window will close after 10 sec or after a key press
                    
                    Enhancement implemented by code extensions

=== 13.06.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: During Data Import/Update IR(n) counter value where always = 1
                    For this reason, the estimate of the duration and the 
                    calculation of the percentages were incorrect.
                    
                    Issue is now solved by code changes

=== 31.05.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: Method for updating selected data in the JobServer has been revised
                    
                    Now JobServer checks also existing data found in JobMgr.DB.
                    With this enhancment the datasync is improved when using.
                     - Objects List -> Extra -> Inport Data of Items/IRs
                    
                    
                    Changed Methode implemented by code extensions

=== 24.05.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobServer Data Sysnc via 
                     -> Sites/Data IMport -> Sync.Site.Data -> 10 - Sync.Site [Irs Only in JM.DB]
                    Stoped with Exception convert DBNull into Typ String 
                    
                    Issue is now solved by code changes

=== 09.05.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "SystemTools_2017_07" -SubAction "StopProcess"
                    with this methode you can stop a process base on folowing conditions:
                    
                     -StopProcessByPid 
                     -StopProcessByProcessName 
                     -StopProcessByFileSearch
                     
                    New Methode implemented by code extensions

=== 08.05.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: ProcessTryStop support's now usage of ProcessObj.CloseMainWindow()
                    Methode is used in CMM,and in StopProcess 
                    
                    Details:  
                     P.Kill.M1 try stop via: ProcessObj.CloseMainWindow()
                     P.Kill.M2 try stop via: ProcessObj.Kill() 
                     P.Kill.M3 try stop via: shell: taskkill /F /T /PID #PID# 
                     P.Kill.M4 try stop via: shell: wmic process where processid="#PID#" delete 
                     Hint:P.Kill.M3 is only used if wmic found on host

=== 26.04.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: -Action "GB_SAPIntegration_2017_01" -SubAction "GB_SAPNxCBProcessVari1"
                    "CB-Step1" now uses NXVer1
                    
                    Enhancment is implemented in JobMgrCmdTools.exe via code changes

=== 17.04.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: -Action "NxDataProcessing_2013_09" -SubAction "NXMacroExecute;NXJournalExecute"
                     search pathes for run_journal.exe ugs_router.exe ugraf.exe updated 
                     search pathes are now %UGII_BASE_DIR%\NXBIN;%UGII_NXBIN_DIR%;%UGII_ROOT_DIR%;%UGII_BASE_DIR%\UGII"
                    
                    changes implemented by code extensions

=== 17.04.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: DB 
 - Additional Info: UpdDb=Yes 
 - Type...........: Doc: 
 - Description....: JobMgr Database performance optimised, when searching Data via O.need.Update + O.CO.Status
                     |-> 'Object List' -> 'Spec' -> 'O.need Update'
                     |-> 'Object List' -> 'Co'   -> 'O.Check.Out.Status' - And-Or - 'IR.Check.Out.Status'
                     
                    And Sync/Update data in JobMgr via
                     |-> 'Sites/Data Import' -> 'Sync.Site.Data' -> '30 - Sync.Site [Data with O.Need.Upd]'
                     |-> 'Sites/Data Import' -> 'Sync.Site.Data' -> '31 - Sync.Site [Checked Out Objects Only]'
                     |-> 'Sites/Data Import' -> 'Sync.Site.Data' -> '32 - Sync.Site [DataO.NeedUpd + Checked Out Obj]'
                    
                    Enhancement is done by create new Index Objects_tbl_IDX46 + Objects_tbl_IDX47 in JobMgr DB

=== 15.04.2024 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: GUI ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: behavior for sorted columns in 'Objects List' grid has changed because of performance issues:
                    when you have more then 10000 objects loaded and sort the columns, cells with the same value will NOT merge into one big cell anymore
                    HINT: you can hold Shift + Ctrl Keys while pressing 'Search & List' button to force the cell merging, regardless of the amount of objects

=== 25.03.2024 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: added setting '05.00 CB Data Collection Extension Name (short: #CBDataCollExt#, optional)' in CheckBox config settings 
                    If defined, this extension name will be added to the data collection directories for 'attribute diffs', 'prototype volume diffs' and 'tiff merge collection'
                    Example directories and files:
                    #JobMgrDataOrg_Root_DP#\#SiteId#_TifMergCollection(#CBDataCollExt#)
                    #DataRootDir#\#Site#_DataCollection(#CBDataCollExt#)\Attribute_CheckBoxDataCollection(#CBDataCollExt#).xlsx
                    #DataRootDir#\#Site#_DataCollection(#CBDataCollExt#)\GeometricVolumeAnalyse_CheckBoxDataCollection(#CBDataCollExt#).xlsx

=== 18.03.2024 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: added new option in JobServer ObjectsList context menu
                    copy process data to text window (short)
                    copies process data of selected process columns into the text window in a shorter form (only res code, message and extended message)

=== 29.02.2024 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: CheckBox 
 - Type...........: New: 
 - Description....: added CB Compair Section CB1Xml and CB2Xml

=== 16.02.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Doc: 
 - Description....: CheckBox Manager CheckBox:Compare
                    A problem occurred when starting or recalculating data with the CheckBox Manager.
                    
                    Issue is now solved by code changes

=== 13.02.2024 ============================================================================
 - Version........: 3.2000 // A.Stein
 - Categorie......: GUI 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: new column 'AssignedToTaskInst' for TaskSchedulerDef
                    if set, the task will only be processed by the given TaskInstance
                    
                    #Exa:
                    Task with value AssignedToTaskInst='TcSync' -> will only be processed when JobServer Parameter /TaskInst is set to TcSync
                    empty column -> will only be processed when JobServer Parameter /TaskInst is not 'defined' or 'empty'

=== 13.02.2024 ============================================================================
 - Version........: 3.2000 // A.Stein
 - Categorie......: GUI 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: new parameter '/TaskInst' for JobServer
                    if set, the taskschedular will only process tasks assigned to TaskInst
                    if not set, all tasks without defined TaskInst will be processed
                    wildcard (*) and multiple values are valid (seperated by ;)
                    
                    #Exa: /TaskInst 'TcSync;TcUpdate*'

=== 12.02.2024 ============================================================================
 - Version........: 3.2000 // A.Stein
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: JobControl -> JobComputer settings extendet
                    Now you can manage the AutoReboot mode for each JobClient.
                    Please look at: JobControl -> JobComputer -> New Colume: [C.AutoRebootDo]

=== 09.02.2024 ============================================================================
 - Version........: 3.2000 // A.Stein
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Shutdown.exe from windows system folder now will be used for rebooting JobServer/JobClient

=== 09.02.2024 ============================================================================
 - Version........: 3.2000 // A.Stein
 - Type...........: New: 
 - Description....: Enhancement implemented by code extensions
                    JobClient Console now prints Information about the Host Uptime and Reboot Requirements
                    JobClient -> Press key I

=== 08.02.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: Content in JobResult File: 'JobData2Result.xml' is minimced
                    Now about 331 (n) lines less in any JobData2Result.xml 
                    Optimisation is implemented by code changes

=== 08.02.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: -Action "JobDataEdit_2012_09" -SubAction "JobData2ResultsSetProcessValue+JobData3TempSetProcessValue"
                    Is now setting the correct results values for entire JobData ('JobData1ToProcess.xml')
                    and save this into JobResult File: 'JobData2Result.xml'
                    Issue is now solved by code changes

=== 29.01.2024 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: Settings 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: Change: 
 - Description....: JobMgr Mail Server configuration was moved from
                    JobServer -> Extra -> Setup -> 94 - JobManager Mail Server Configurations
                    to
                    JobServer -> Extra -> 11 - JobManager Mail Server Configurations

=== 19.01.2024 ============================================================================
 - Version........: 3.2000 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: JobServer JobControl Methode to generate JobPacketes is optimiced
                    Optimisation is implemented by code changes

=== 19.01.2024 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: added CheckBoxSetting for Entities
                    EN.TXT.DisplayValue difference for ignored attributes [Cond:WRN/ERR/NO]
                    defines how to evaluate different text display values for entities texts that contains attributes that should be ignored
                    this rule is only active when 'EN.Entity ignore attributes defined in '01 PH.Attributes ignore List' is on
                    and only for entities that contain attributes that are defined in '01 PH.Attributes ignore List'
                     - DiffReport_as_WRN: Differences will be reported as Waring (default)
                     - DiffReport_as_ERR: Differences will be reported as Error.
                     - DiffReport_NO....: Differences will NOT be reported. Nothing will be written to the report file.

=== 19.01.2024 ============================================================================
 - Version........: 3.2000 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: added CheckBoxSetting for Entities
                    EN.Entity ignore attributes defined in '01 PH.Attributes ignore List' [Cond:YES/NO]
                    defines if Entity data, that contains attributes in the text blocks, should be ignored when the same attribute is defined in the attributes ignore list [Default=false]" + vbCrLf +
                    Example:"+vbCrLf+
                             PH.Attributes ignore List: NX_MassSource"+vbCrLf+
                                                        BEARBEITER"+vbCrLf+
                                                        PRKT"+vbCrLf+
                             Entity 25 Text:"+vbCrLf+
                                            <Texts>"+vbCrLf+
                                               <Text>&lt;WREF8*0@PRKT&gt;</Text>"+vbCrLf+
                                            </Texts>"+vbCrLf+
                    -> this entity 25 will be ignored, because it contains attribute PRKT that is defined in PH.Attributes ignore List"
                       furthermore text value (not display value) has to be equal

=== 10.01.2024 ============================================================================
 - Version........: 3.1800 // A.Stein
 - Categorie......: JobControl Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: Added JobRules->JobDefExtended2->5.3 Minimum free memory on JC for Job (MB)
                    Now its possible to define at JobRule miminum free memory on JobClient to get a new Job.
                    #Doc: If the avaialable memory on the JobClient is lower than the defined value,
                          |-> no job of this rule will be send to JobClient.

=== 05.01.2024 ============================================================================
 - Version........: 3.1800 // A.Stein
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Filtering of JobControl Rules via JC.J.Rule.filter by:'J.JobName'
                    now can also be defined in multilines

=== 04.01.2024 ============================================================================
 - Version........: 3.1800 // A.Stein
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: Added RowEditTemplate for JobComputers

=== 15.12.2023 ============================================================================
 - Version........: 3.1800 // A.Stein
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: The global standard grid layouts can be updated and restored using the View->Save Global functions
                    Enhancement implemented by code extensions

=== 11.12.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Type...........: Doc: 
 - Description....: When importing TC metadata into JobMgr
                    Check: ERR_302_DSHasMultibleCADFiles where missing the count 
                    how many times the DS contains CADFiles in Dataset Named references.
                    
                    Issue is now solved by code changes
                    
                    Also the incorrect spelling is corrected 
                    from:ERR_302_DSHasMutiCADFiles to:ERR_302_DSHasMultibleCADFiles

=== 11.12.2023 ============================================================================
 - Version........: 3.1800 // S.Gueth
 - Categorie......: GUI ObjectList 
 - Type...........: New: 
 - Description....: in JobManager Objects List you can now select an Object and hold 'P + Ctrl'
                    this will print the selected job result of the current selected object
                    you select different process columns to switch beween different results
                    Hint:
                    changed load behavior: Before you could only see the last job result, now you see the selected job result

=== 28.11.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: During eding Object status and using additonal option
                    inc..AP-BOM Component + inc. Data of Item 
                    JobMgr stopped with an exception message.
                     
                    Issue is now solved by code changes

=== 24.11.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: Scripts/Params. 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: Partupdate process paramter '-compression=compresses/uncompresses'
                    is now avilable also for part_utility.exe process

=== 21.09.2023 ============================================================================
 - Version........: 3.1800 // A.Stein
 - Categorie......: GUI JobControl Settings 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: Now it's possible to activate automatic reboot when a JobServer/JobClient requires a reboot after windows-update.
                    JobClient turns into FinishAndReboot state, so the reboot will not start until all running jobs are processed.
                    JobServer will start the reboot after a timespan of 3 minutes. In this timespam the reboot can be canceled interactiv in the JobControl-UI
                    Settings-Control: Extra->JobServer Active Control->Check Pending Reboot
                    New Methode implemented by code extensions

=== 13.09.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: Doc: 
 - Description....: During TC.Data Import/Update process JobServer check's now if ItemId with different 
                    puid is to insert to JobMgr Database. 
                    When this happens, the item is updated, the process data is restored and 
                    attached to the 'new' item.
                    This enhancement avoids having duplicate items with same ItemId entries in the JobMgr database.
                    
                    Note: This issue occurred in TC.Databases where items were deleted and recreated with the same ItemId.
                    Enhancement implemented by code extensions

=== 07.09.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: DB Import Sites/Data Import Reports ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: During some JobMgr.DB SQL operation the operations has faild 
                    because an SQL CommandTimeout were thrown.
                    Now JobServer is using MSSQL_DB_CommandTimeout time as set in JobServer configurations.
                    Enhancement implemented by code extensions

=== 05.09.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: Doc: 
 - Description....: SiteData 'DataSync' checks now if ItemId is to be removed from JobMgr.DB
                    Enhancement implemented by code extensions

=== 25.08.2023 ============================================================================
 - Version........: 3.1800 // A.Stein
 - Categorie......: Settings JCT 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: -Action "PartUtility_2018_04" -SubAction "PartUpdateNativeViaFromToDir"
                    
                    Enhancement implemented by code extensions
                    Added new Cla Parameters NativeBackup_Archiv_DP and NativBackupMethod
                    Now its possible to backup files before partupdate
                    NativeBackup_Archiv_DP defines the root to copy the files to
                    when NativeBackup_Archiv_DP is not set, no backup will be done
                    NativBackupMethod defines the folderstructure in the backup root
                    possible values for NativBackupMethod:
                    ViaPacketName (Default) -> backup files will be copied in #Archiv_DP#/PacketName
                    ViaFolderStructure -> whole folderstructure will be recreate in Archiv_DP

=== 25.08.2023 ============================================================================
 - Version........: 3.1800 // A.Stein
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: New: 
 - Description....: added NativeBackupRoot_DP to SiteDef_cls
                    NativeBackupRoot_DP can be used to backup files by dedicated processes
                    Enhancement implemented by code extensions

=== 14.08.2023 ============================================================================
 - Version........: 3.1800 // S.Gueth
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: Object Groups in JobManager have not been updated in the database on changing the user column value
                    Issue is now solved by code changes

=== 10.08.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: Admin Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: New Methode implemented for checking JobMgr DB Import Performance
                    How to Use: 
                     - Activtate Extra -> '05 - Log ON/OFF' 
                     - Now Log2Console should be active
                     - Start Importing Data 
                     - PerfImport SQL File is now generaded in "#JobMgr_Root_DP#\91-DATA.TempTransfer\JobMgr_Datasets_and_Irs_Import_PerfTest_230810_17h26m.sql" 
                     - This SQL contains all sql statments that where used during 'Imnport Process'
                     - Hint:search in Log2Console for 'Datasets_and_Irs_Import SQL.TestFile written in:' ther is the Infor where .sql file is written in
                     - Alternative you can open the folder via JobMgr.'File' -> 'Open Folder 91-DATA.TempTransfer'
                    
                    New Methode implemented by code extensions

=== 02.08.2023 ============================================================================
 - Version........: 3.1800 // S.Gueth
 - Categorie......: CheckBox 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: get correct sheet names for checkbox cgm files (.cgm)
                    Issue is now solved by code changes

=== 27.07.2023 ============================================================================
 - Version........: 3.1800 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: PLMPerfAnalyse tool crashed after generating a new event when visible was not defined
                    Issue is now solved by code changes

=== 19.07.2023 ============================================================================
 - Version........: 3.1800 // S.Gueth
 - Categorie......: CheckBox 
 - Type...........: New: 
 - Description....: If extract files are not found on opening CheckBox links via JobManager
                    the replacing rules from the JobManager settings will now be used to find the extracted files

=== 13.07.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBMoveCBFilesToCBArchiv" 
                    
                    CheckBox extract returns for CGM result now 
                    - how many CGM files where extrated and moved into CBArchiv
                     
                    #Example 2 CGM's where found [CGM:ff:YES] Extendet Message [CGM:ff:2]
                    #Example 0 CGM's where found [CGM:ff:NO] Extendet Message [CGM:ff:0]
                    
                    Change implemented by code extensions

=== 06.06.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBMoveCBFilesToCBArchiv"
                    
                    Intensive software recoding where done to support existing and new CheckBox requirements.
                    Enhancement implemented by code refactoring

=== 06.06.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: Admin JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: JobControl support's now use of JobDef.P.Stat(N,M) for setting O.P.Stat values 
                    
                    #Example: if setting JobDef.P.Stat(N,M)='RUN.PStatKey1' is set 
                    then following Results will be evaluated:
                    
                     in case JobResult      O.P.Status will be set to 
                        "OK"           =    D.PStatKey1.OK 
                        "WRN"  =            D.PStatKey1.WRN 
                        "ERR"  =            D.PStatKey1.ERR 
                    
                    intent of this enhancment is that former setting [PStatKey=CB1.3] is not anymore required but still supported
                    
                    Enhancement implemented by code extensions

=== 21.04.2023 ============================================================================
 - Version........: 3.1800 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: added function 'paste from clipboard' into centext menu of grid cells in the JobManager

=== 27.03.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBMoveCBFilesToCBArchiv"
                    When using new NxCheckBox_*V.2.0.1.35.exe or higher (Example: NxCheckBox_64_CR2212_V.2.0.1.35.exe)
                    then CB evaluation has been only evaluate Sections [JC:OK][NX.Syslog.END:OK][Move2Archiv:OK]
                    all other sections [PL:OK][UF:OK][UD:OK][PH:OK][MD:OK][AS:OK][DR:OK][EN:OK][CBXml:OK] has been missing.
                    Now all sections are avilable again.
                    Issue solved by code changes

=== 24.03.2023 ============================================================================
 - Version........: 3.1800 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: JobClient StartgUp Control enhanced
                    Now it is possible to run multiple JobClients 
                    on the same JobComputer using the same JobServer instance.
                    
                    Enhancement implemented by code extensions

=== 20.03.2023 ============================================================================
 - Version........: 3.1800 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: added functionality to add or sync an top assembly and its components to JobManager Groups
                    group name shema is: AP-{ItemRevOfTopAssembly}_#{counter}
                    Example............: AP-4711/A_#001
                    
                    In JobServer select: 
                    Objects List -> Extra -> View all Datasets of NXAssembly
                    Now there are 3 New options: 
                    - add Objects to New JobMgrGroup
                    - add Objects to existing JobMgrGroup
                    - sync Obj's with existing JobMgrGroup

=== 10.03.2023 ============================================================================
 - Version........: 3.1800 // S.Gueth
 - Categorie......: CheckBox 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: get correct names for checkbox *_zz_NXSection.syslog file by using generic naming method
                    Issue solved by code changes

=== 10.03.2023 ============================================================================
 - Version........: 3.1800 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: 'CheckBox Manager' -> 'CB Config' -> '01.3 CB Naming and Compare Setting'
                    added option 'NamingV2_ByAutomation'
                    
                    Get Extract CheckBox File Names and CheckBox Compare Files By Automation
                    - Extract CheckBox File Names are set automatically with 'NXVersion' and 'Version Change Info'
                      'Version Change Info' describes if the NXVersion on CheckBox load and NXversion on last save are equal or not
                      Example file Name for CheckBox Extract: Object1_#NX1992_#VCN.xml
                    
                    - For more information and how it behavs, see description in CheckBox Manager' -> 'CB Config' for:
                      -> '01.3 CB Naming and Compare Setting'
                      -> '02.01.1 CB1 Extract File Identifyer' and '02.04.1 CB2 Extract File Identifyper'

=== 10.03.2023 ============================================================================
 - Version........: 3.1800 // S.Gueth
 - Categorie......: Install and Setup 
 - Additional Info: UpdDb=No 
 - Type...........: Doc: 
 - Description....: JobManager Updater enhancements:
                     - added JobManager root directory to title
                     - added button to reload local zip files
                     - zip file size is shown in gui
                     - directly update 10-Documentation.Application folder (nor archiving of this folder anymore)

=== 10.03.2023 ============================================================================
 - Version........: 3.1800 // S.Gueth
 - Categorie......: CheckBox 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: get correct names for checkbox archive files (.cgm) by using generic naming method
                    issue solved by code changes

=== 09.02.2023 ============================================================================
 - Version........: 3.1800 // A.Stein
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: JobControl -> JobComputer settings extendet
                    Now you can set the JobClient in FinishAndReboot Mode from JobServer
                    Please look at: JobControl -> JobComputer -> New Colume: [C.Reboot]

=== 16.12.2022 ============================================================================
 - Version........: 3.1700 // J.Fes
 - Categorie......: TaskScheduler 
 - Additional Info: UpdDb=Yes 
 - Type...........: Doc: 
 - Description....: Tasksheduler Data definition colume 'ProcessTaskParameterPacket' // 'P.Param' remove
                    because this data are not used but needet a lot of resources.
                    
                    Change implemented by code and SQL Scripts

=== 08.11.2022 ============================================================================
 - Version........: 3.1700 // J.Fes
 - Categorie......: ProcessGroups Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: Doc: 
 - Description....: JobServer: Number of ProcessGroups increased to 40.
                    Now 40 generic process groups are avilable.
                    Enhancement implemented by code extensions

=== 31.10.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "JobDataExtract_2013_10" -SubAction "InputListExtract" 
                    New option -orderBy is available 
                     -orderBy 'NOT' Defines the output file not to order. 
                                The contend Is Like as the order in JobData1ToProcess.xml (Default)
                     -orderBy 'DES' Defines if the output file content is in 'descending' order
                     -orderBy 'ASC' Defines if the output file content is in 'ascending' order
                    
                    This method can be used to order the output file content
                    Enhancement implemented by code extensions

=== 24.10.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: JobServer -> JobControl JobRules improved
                    
                    When JobContol-> JobRules do selects Class 'Items'
                    and JobRule where using Assembly sort order by Levels/Component where aktive then,
                    JobControl rule did end with the Issue that no Job where created.
                    The reason for this was that an incorrect SQL was generated for the selection of JobObjects.
                    Issue is now solved by code changes.

=== 20.10.2022 ============================================================================
 - Version........: 3.1602 // A.Stein
 - Categorie......: CommandLineArgs 
 - Type...........: New: 
 - Description....: -Action "PartUtility_2018_04" -SubAction "EXTRACT & EVALUATE"
                    
                    
                    Enhancement implemented by code extensions.
                    Added Parameter MFKKeyUse to process MFKDate in PU.
                    Important: MFK Definitions has to be added in ImportSettings3 for the Site.
                    Example: MFKKeyUse=Yes =>  @DB/4911/00 => @DB/%#MFK#%,=item_id=4911,object_type=Z9_DesignStd/00.

=== 20.10.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: On delete Data from JobMgr a Messagebox 
                    where displayed for 'eatch deleted Datarow'
                    with Text: 'unable to convert from ('null') to System.Int32'
                    
                    Now the Messagebox is not displayed anymore
                    Issue is solved by code changes

=== 18.10.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: JobControl 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: JobControl 'Extendet Process State Control' support's now usage of J.ResMsgExt  
                    Example:
                      [RuleID=ERR] [O.Type=*] [J.ResCode<>0] [J.ResMsg=*] [J.ResMsgExt=*SUCCESS*] [J.ResWarn=*] [P.Stat=D.ERR] [P.Control=DeactivateJobRule]

=== 13.10.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: CheckBox 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: CheckBox Compare enhanced 
                    skip ViewPartName check in Drawing Data, if one of the part names is nothing -> in older CheckBox Versions there was no partname
                    
                    Issue is now solved by code changes

=== 11.10.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: added setting '03.4 CB Compair File Custom Directory (optional)' in CheckBox Config Settings
                    will add a custom directory only for CheckBox Compair file (*CBDif.txt) at the end of the default path
                    Example
                    C:\root\path\site\12345\1234567\A\#CustomCBCompairDir#\NX12_NX10_CBDif.txt

=== 07.10.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: added CB.Config PartHeader Setting 'PH.Attribute do Compare [Cond:YES/NO]'
                    defines if all Attribute data is to be compared [Default=True]
                    If false entire Attribute Section will !! NOT !! be compared

=== 05.10.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: JobControl Job generation output optimiced:
                    The output now contains fewer messages and is easier to read.
                    
                    Enhancement implemented by code changes.

=== 27.09.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: added ability to set an Event to Visible or Not Visible and to change the Event Color in PLMPerf Analyse

=== 26.09.2022 ============================================================================
 - Version........: 3.1602 // A.Stein
 - Categorie......: GUI ObjectList 
 - Type...........: New: 
 - Description....: Shortcuts has been added to ObjectList
                    ctrl+L => opens J.Log
                    ctrl+shift+L => opens JobLink
                    ctrl+E => opens ProcState EditWindow

=== 22.09.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: parameter '/DefaultTab' for JobServer
                    sets the given tab as the default tab, that is shown on JobServer startup
                    possible values:
                    ObjectList
                    JobControl
                    TaskScheduler
                    Reports
                    Scripts
                    ProcessGroups
                    Sites
                    
                    Example:
                    /DefaultTab JobControl

=== 22.09.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: parameter '/TabsVisible' for JobServer
                    If set, only given tabs will be visible in the JobServer
                    If not set, all tabs will be visible in the JobServer
                    multiple values are valid (seperated by char '+' -or- ';' -or- ',')
                    possible values:
                    ObjectList
                    JobControl
                    TaskScheduler
                    Reports
                    Scripts
                    ProcessGroups
                    Sites
                    
                    Example:
                    /TabsVisible ObjectList+JobControl+TaskScheduler

=== 20.09.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: Install and Setup Admin 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: changed archiv structure for JobManager Updater

=== 16.09.2022 ============================================================================
 - Version........: 3.1602 // A.Stein
 - Categorie......: CommandLineArgs 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: Now its possible to start PLMPerf with the Parameter -Config
                    PLMPerf will use the Settings in the -Config directory (ImportConfig;SettingsGlobal)
                    e.g. "..JobMgrStart.cmd -Config addPLM" => 01-PLMPerf.Custom.addPLM

=== 14.09.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "JobDataExtract_2013_10" -SubAction "InputListExtract" 
                    New filters are available via new parameters
                     -includeDataFilter: Defines include filter where #DataFilterFormat#.Value is like 'includeDataFilter'
                     -excludeDataFilter: Defines exclude filter where #DataFilterFormat#.Value is NOT like 'excludeDataFilter'
                     -DataFilterFormat.: Defines the content where include/exclude DataFilter is used to filter the Data
                    
                    This method can be used to filter the extracted data from JobData1ToProcess.xml
                    Enhancement implemented by code extensions

=== 04.09.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: JobServer -> JobControl JobRules improved
                    
                    When JobContol-> JobRules do selects Items
                    then Item J.Packet size (count) was not exactly adopted.
                    Also it is expected that Item selection performance is improved,
                    because the item data SQL could be simplified (Join Revision Data deactivated).

=== 29.08.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: -Action "CBTools_2012_05" -SubAction "Compair2XmlFiles"
                    
                    CheckBox: Assembly find reference component enhanced.
                    Now following matching conditions are used for all components
                    
                    - 1st C1_HandleAndCompProps both comp has same Handle ID + Properties:Matrix+ComponentLevel+Callout+InstanceName
                    - 2nt C2_CompProp           both comp has same Properties:Matrix+ComponentLevel+Callout+InstanceName 
                    - 3rd C3_Handle             both comp has same Handle ID 
                    - 4th C4_FileProp           both comp has same FileProp:Matrix+File_PN+File_PRN
                    
                    If 2-components did match then comparation for this 2 matching compoents will be done.

=== 29.08.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Doc: 
 - Description....: -Action "CBTools_2012_05" -SubAction "Compair2XmlFiles"
                    
                    CheckBox: Compair settings enhanced.
                    Now it is posible to contol via CheckBox compare settings:
                      - if Assembly Handle.ID is to be compared [On diff:Default=WRN]
                      - if Assembly Instance.Handle.ID is to be compared [On diff:Default=WRN]
                    
                    
                    If 2-components did match then comparation for this 2 matching compoents will be done.
                    Enhancement implemented by code extensions

=== 24.08.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: CheckBox 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: changed display names in the CheckBox Manager (select combo box) from filename to cli name

=== 23.08.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: Install and Setup 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: Changed logic of Jobmanager Updater for faster updates and checking for readonly files

=== 22.08.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Type...........: New: 
 - Description....: logged in users for PLMPerf measurement are now fetched from the TeamCenter database by default 
                    HINT: the TC Site settings must be provided in the JobRule for the perf measurement

=== 18.08.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: NX.syslog section parser optimized
                    Now the NX.sections will be better selected and interpreted.
                    Also the content is easier to read. 
                    because Not required Nx.syslog data lines are filtered out. 
                    
                    Also Syslog file naming syntax changed 
                     - from: '#CLIName#_zz_NXSyslogSection.txt'
                     - to..: '#CLIName#_zz_NXSection.syslog'
                    
                    Enhancement implemented by code extensions

=== 09.08.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Description....: -Action "PartUtility_2018_04" -SubAction "EVALUATE" 
                    Resultsection NX.Section PU.NX.Syslog where not correct interpreted  
                    when TC.Side is defined as MFK site 
                    Please check new setting '05-Use for MFK Objects - MFKKey for NX.syslog section identification'
                    
                    Issue is now solved by code changes

=== 05.08.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBMoveCBFilesToCBArchiv" 
                    Since NxCheckBox V2.0.2.33 (NX CR2007) CB_RunExtractDataLog.txt file content changed
                    For this reason CB_RunExtractDataLog.txt section parser needed to be enhanced.
                    Now Sections are identifed by Key Start Check at
                    
                    Issue is now solved by code changes

=== 26.07.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: JCT CheckBox 
 - Type...........: Change: 
 - Description....: on CheckBox Extract and CheckBox Compair it will be checked if length of object cli name is bigger then 45 chars 
                    if yes, the puid of object will be added at the front of the extracted xml file and the base name will be cut to 10 characters
                    Example: 
                    old xml name: PSLL.Forklift_truck_LINDE_like_H100_1200_large_AA_master_PSLL.Forklift_truck_LINDE_like_H100_1200_large-AA_#NX2206.xml 
                    new xml name: RoLAlgqpYrm$UB-PSLL.Forkl-AA_#NX2206.xml

=== 25.07.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: JCT CheckBox 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: added 'Move2Archiv' result section in CheckBox extract process

=== 21.07.2022 ============================================================================
 - Version........: 3.1602 // S.Gueth
 - Categorie......: DB 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: changed length of column 'Value' in datatable 'DrawingIndexingSearch_tbl from length from 2000 to max,pleas update datatable

=== 20.07.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "JobDataExtract_2013_10" -SubAction "JobDataList"
                    Is new -SubAction "JobDataList" enables you to list JobData contained in JobData1ToProcess.xml. 
                    Please see also Parameter: '-JobDataFilter_ObjectClass=I,IR,DS,Nativ'
                    Please see also Parameter: '-JobDataFilter_SiteOwning=O,R'
                    
                    New Methode implemented by code extensions

=== 05.07.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: JobControl Scripts/Params. 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobServer #Variables# extendet with:
                      Variable                         Example:
                      #DateNow#                        10.12.2021
                      #DateTimeNow#                    10.12.2021 11:15        
                      #DateTimeNow_DDMMYYYYHMS#        10.12.2021 11:15:20
                      #DateTimeNow_ForSqlServer#       Convert(datetime,'2021-12-10 11:15:24',120) 
                      #DateTimeNow_ForFileExtend#      2022-07-05_09h15m24s
                      #DateTimeNow_yyyy-MM-dd-HH-mm#   2022-07-05-09-15
                      #DateTimeNow_yyyyMMdd-HHmmss#    20220705-091524
                      #DateTimeNow_yyyyMMdd#           20220705
                    
                    The new #Variables# can be used to insert current DateTime into .cmd .txt .sql files JobServer Datum
                     see also 95-JobServer_Scripting_Help\10-JobManagerV3_Docu_Setup_GitterVariablen.txt
                    Enhancement implemented by code extensions

=== 04.07.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: Admin 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: Executing SQL via SQLCMD support's now SSL Encryption 
                    IMplemented via adding '-N' to SQLCMD comandline parameter
                    
                    Enhancement implemented by code extensions

=== 28.06.2022 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: JobServer now analyses if TC Object contains MFK Keys
                    Enhancement implemented by code extensions

=== 28.06.2022 ============================================================================
 - Version........: 3.1602 // J.Fes
 - Categorie......: JCT CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: CheckBox Compare enhanced 
                    New setting for disable AUID Check in ViewPartName comperation
                    Please see Cat04_DrawingData-> DR.View.ViewPartName check USE AUID Cond[True/False]
                    
                    Enhancement is implemented by code extensions

=== 12.06.2022 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: JobServer did throw an Issue when data has been filterd in Datagrid.
                    Issue is now solved by code changes

=== 10.06.2022 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobServer file menu was reorganized
                    Change is done to get more easy to the subdirectory used via PLMJobManager solution
                    
                    Enhancement implemented by code changes

=== 10.06.2022 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: JobServer 'Object Liste' -> 'Obj.in.Gr(s)' now sorted
                    
                    In JobServer 'Object Liste' Data in Colume 'Obj.in.Gr(s)' are now Alpha Numeric sorted.
                    Example Data in 'Obj.in.Gr(s)' = GR01, GR10, GR20, GrZZ100
                    Enhancement implemented by SQL Script changes --> please Update Database

=== 24.03.2022 ============================================================================
 - Version........: 3.1601 // S.Gueth
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: You can now edit the ObjectAttribut01..10 directly in the Objectjects list of the JobServer

=== 21.03.2022 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobServer did not read the 'File Size' correct. 
                    Issue is now solved by code changes

=== 28.02.2022 ============================================================================
 - Version........: 3.1601 // S.Gueth
 - Categorie......: GUI 
 - Type...........: New: 
 - Description....: Object's can be searched via 
                    - Process Category

=== 18.01.2022 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: JobServer Attributes Definitions enhanced
                    
                    It is now Posible to define in each AttrDef 
                    if the Attributes Def is used for 'Item' 'ItemRevision' 'Datasets'.
                    More Details please review infos in Sites Attribute def.
                    
                    Searching data via Attributes values supports now:
                     - on Items Attributes finds data only on Items
                     - on ItemRevision Attributes finds data only on ItemRevision
                     - on Datasets Attributes finds data on Datasets and on ItemRevision
                    
                    Enhancement implemented by code extensions

=== 29.12.2021 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "CMM2NX_2021_06" -SubAction "CMM_InpListGen"
                    Rules for comandline arg '-SkipBOMCheckBeforeCMM_YESNO' is now handelt independet of comandline arg '-force'
                    If comandline arg -SkipBOMCheckBeforeCMM_YESNO='NO' then BOM Check result will be used and not anymore overwritten by comandline arg '-force'
                    
                    Hint: if you want to force inserting all Data into CMM input list then please set
                    comandline args:  -SkipBOMCheckBeforeCMM_YESNO='YES' and  -force
                    
                    New Methode implemented by code extensions

=== 22.12.2021 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Description....: JobServer did not analysed NX.prt via ugpc.exe
                    
                    Issue is now solved by code changes

=== 16.12.2021 ============================================================================
 - Version........: 3.1601 // A.Stein
 - Categorie......: CommandLineArgs 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: -Action "CMM2NX_2021_06" -SubAction "CMM_InpListGen"
                     Added Commandlineparameter for SubAction CMM_InpListGen: GroupKeyNameForMissingSubComps
                     if GroupKeyNameForMissingSubComps is defined, a Group will be created/updated with all missing SubComps
                    Enhancement implemented by code extensions

=== 13.12.2021 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "TcExtractData_2013_10" -SubAction "*"
                    JobClient gets now automatically deactivated when try to get Data from TC
                    but an issue appiears while connecting to TC.DB
                    
                    Enhancement implemented by code extensions

=== 07.11.2021 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: ObjectList ObjectJobResults 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobServer Objects Liste contains now new Data Colume: P.Time Dur sec
                    
                    Show values are:
                     If 'P.Time.Start' not set or not valid value = -1
                     If 'P.Time.End'   not set or not valid value = -2
                     If 'P.Time.End > P.Time.Start' is valid = datediff(SECOND,['P.Time.Start'],['P.Time.End'])
                     in any other case value = -3
                    
                    Enhancement implemented by code extensions

=== 07.11.2021 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobServer Objects List supports data row hight resizing.
                    Each datarow can have individual row hight.
                    Enhancement implemented by code extensions

=== 26.10.2021 ============================================================================
 - Version........: 3.1601 // A.Stein
 - Categorie......: Admin Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: Doc: 
 - Description....: option "Ensuring parsing value" added in result classification rules
                    If this property is set to true, it is ensured that the value is parsed from the sourec text.

=== 20.10.2021 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: -Action "TCTools_2019_07" -SubAction "TCPBDataImport"
                    Process result evaluation enhanced when Option -NamedRefFileNameSchema is used.
                    During result evaluation methode is now searching/checking 
                    in 'IR' -> 'Dataset' -> 'NamedReference' for referenced NamedRefFile
                    
                    Enhancement is implemented by code extensions

=== 16.10.2021 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: -Action "CMM2NX_2021_0" -SubAction "CMM_ResultEval"
                    Methode to find Object CMMReports.xml improved
                     
                    Enhancement implemented by code extensions

=== 15.10.2021 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: JobServer Object need update trigger (before/after the Job) where not correct handelt.
                    In case the JobRule setting for 
                      'Job Def Extended 2' -> '3.1 New Job Process DataHandel' where set to 'AddEdit0No'
                    
                    Issue is now solved by code changes

=== 24.09.2021 ============================================================================
 - Version........: 3.1601 // A.Stein
 - Categorie......: Settings JCT 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: -Action "CMM2NX_2021_06" -SubAction "CMM_OptionFileEdit"
                     New Option -CMMOpt_TemplateEdit_YESNO avilabel
                    if 'YES' then Model,Assembly,Drawing-TemplateNames will be edit in CMM-Optionfile. Default = NO 
                    
                    New Option implemented by code extensions

=== 24.09.2021 ============================================================================
 - Version........: 3.1601 // A.Stein
 - Categorie......: Settings JCT 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: -Action "CMM2NX_2021_06" -SubAction "CMM_OptionFileEdit"
                     New Option -CMMTimeOutInMinutes avilabel
                     If this Timespan will be reached the CMM Process will terminate for this Object.
                     When this timeout is reached, then Process-ResCode is set to='CMMLog-004'
                    New Option implemented by code extensions

=== 14.09.2021 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: When a new 'JobControl.Rule' is created then Max 
                    Default values for:  
                      AP.O.Min.Comp  'SelObjectsBy_MinComponents' (Old default=0)
                      O.Max.Comp     'SelObjectsBy_MaxComponents' (Old default=6000)
                    not set anymore 
                    
                    Change is done by code extensions

=== 26.08.2021 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: During result evaluation any R.Msg containing linefeeds (vbCrLf,vbLf) 
                    will be replaced with following rules 
                     - vbCrLf '!CrLf!' 
                     - vbLf   '!Lf!'  
                    
                    Enhancement implemented by code extensions

=== 12.08.2021 ============================================================================
 - Version........: 3.1601 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -Action "CMM2NX_2021_06" -SubAction "CMM_ResultEval"
                    added Fidelity check of CMMReport XML file

=== 28.07.2021 ============================================================================
 - Version........: 3.1601 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: NXBOM_Analyse is now parsing correct pathes from UGII_LOAD_OPTION file 
                    Issue is now solved by code changes

=== 14.05.2021 ============================================================================
 - Version........: 3.1503 // S.Gueth
 - Categorie......: Scripting 
 - Type...........: New: 
 - Description....: JobClient will set the number of current running Jobs to the Environment Variable JobMgr_ProcessesJobsN
                    this can be used in the JobScripts cmd files

=== 21.04.2021 ============================================================================
 - Version........: 3.1503 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: JobServer TC.Site definitions enhanced
                    It is now posible to define TC Table mappings. 
                    
                    Please see settings: 
                    Sites/ Data Import -> SiteDef -> 7.02 - TC Table mapping
                     
                    Settings can be used to map to correct project table via define setting 
                    PPROJECT_LIST=PPROJECT_LIST_0
                     
                    Enhancement implemented by code extensions

=== 21.04.2021 ============================================================================
 - Version........: 3.1503 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: Doc: 
 - Description....: Site Data Import support now import TC.Project data for 'Items' and 'Item Revisions'
                    Befor this enhancment TC.Project data where only supported for TC Datasets 
                    Enhancement implemented by code extensions

=== 20.04.2021 ============================================================================
 - Version........: 3.1503 // S.Gueth
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: added import filter for projects in:
                    Sites/Data Import -> Import Settings 2 -> Import Project Search Names
                    you can define project filters for the import

=== 19.04.2021 ============================================================================
 - Version........: 3.1503 // S.Gueth
 - Categorie......: JobControl Settings 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: now you can define email configurations in JobServer under Extra -> 12 - JobManager EMail configurations
                    this EMail configs can be used to send EMails for JobControl Aciv Status Rules
                    check settings under  Extra -> 09 - JobControl Activ Status Rules Edit

=== 13.04.2021 ============================================================================
 - Version........: 3.1503 // J.Fes
 - Categorie......: Settings JCT 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Change: 
 - Description....: -Action "CMM2NX_2021_06" -SubAction "CMM_InpListGen"
                    Option -CMM_InpList_DPNE removed and replaced by CMM_InpListMetr_DPNE
                    
                    Issue is now solved by code changes
                    New Methode implemented by code extensions
                    Enhancement implemented by code extensions

=== 13.04.2021 ============================================================================
 - Version........: 3.1503 // J.Fes
 - Categorie......: Settings JCT 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Change: 
 - Description....: -Action "MigIdeas2NX_2013_10" -SubAction "CMM_InpListGen"
                    Option -CMM_InpList_DPNE removed and replaced by CMM_InpListMetr_DPNE
                    
                    Issue is now solved by code changes
                    New Methode implemented by code extensions
                    Enhancement implemented by code extensions

=== 12.04.2021 ============================================================================
 - Version........: 3.1503 // J.Fes
 - Categorie......: Settings JCT 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: -Action "MigIdeas2NX_2013_10" -SubAction "CMM_InpListGen"
                    New rule avilable commandline for CMM commandline options
                     
                     -Status_CMMInitial
                     -Status_CMMApproved
                     -Status_CMMFailed
                     
                    If value is set to 'CMM_Status$NotUsed' then status is not used and not evaluated
                    This value is to be set when CMM process do not uses CMM status rules.
                     
                    Enhancement implemented by code extensions

=== 12.04.2021 ============================================================================
 - Version........: 3.1503 // J.Fes
 - Categorie......: Settings JCT 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: -Action "MigIdeas2NX_2013_10" -SubAction "CMM_InpListGen"
                    New rule avilable commandline for CMM commandline options
                     
                     -Status_CMMInitial
                     -Status_CMMApproved
                     -Status_CMMFailed
                     
                    If value is set to 'CMM_Status$NotUsed' then status is not used and not evaluated
                    This value is to be set when CMM process do not uses CMM status rules.
                     
                    Enhancement implemented by code extensions

=== 30.03.2021 ============================================================================
 - Version........: 3.1503 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: Removing Item Data from Groups did end in an exception 
                    Issue is now solved by code changes

=== 18.03.2021 ============================================================================
 - Version........: 3.1503 // S.Gueth
 - Categorie......: CommandLineArgs Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added JobClient paremeter JobMgr_JCAliasName for JobClient
                    defines the name of the current jobclient, if not set, the current computername will be used
                    Exa1: /JobMgr_JCAliasName "%Computername%.TCPLMT"
                    Exa2: /JobMgr_JCAliasName "%Computername%.TCPLMP"

=== 16.03.2021 ============================================================================
 - Version........: 3.1503 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added new option in: JobServer -> Sites -> ImportSettings 3 
                     5.04 - JM-TC.Sync:Check only addNew and to remove Data (Quick Sync)
                     If the value is 'true' Sync will:
                      - only search for new data or data need to be removed
                      - propertys values (LastMod Date..) will not be compared
                     If the value is false this setting is ignored
                     Hint: This setting is desinged for getting fast:
                      - missing data to JobMgr 'chk add new'
                      - remove data from JobMgr not exist in TC anymore

=== 16.03.2021 ============================================================================
 - Version........: 3.1503 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added new option in: JobServer -> Sites -> ImportSettings 3 
                     5.03 - JM-TC.Sync:include LastSaveDate check
                      If the value is true, LastSaveDate is used when comparing JM.DB with TC.DB data.
                      If the value is false, LastSaveDate is NOT used

=== 03.03.2021 ============================================================================
 - Version........: 3.1502 // S.Gueth
 - Categorie......: JobControl Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: New: 
 - Description....: JobControl Rules enhanced 
                    new setting '3.5: JobMgr Activ Control - Percentage ERR Rate' and '3.6: JobMgr Activ Control - Absolute ERR Count'
                    you can define rules to control active status for JobControlRules // ProcessGroups // JobClients // Site
                    that rules will be triggered when the percentage/absolute error rate of the Job is higher than the defined value

=== 03.03.2021 ============================================================================
 - Version........: 3.1502 // S.Gueth
 - Categorie......: GUI ObjectList 
 - Type...........: New: 
 - Description....: added filter Imp. WRN/ERR Msg. to JobManager Objects List Filter
                      -> Objects List
                          -> Spec
                              -> OImp. WRN/ERR Msg.:

=== 05.02.2021 ============================================================================
 - Version........: 3.1502 // S.Gueth
 - Categorie......: ProcessGroups Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: ProcessGroups Enhanced with new option JobGenreation Active
                    Defines if 'JobGeneration' which belonging to Process group is active.
                    #Doc: 
                    if value 'False' no new job will be generated (Default is 'True')
                    Hint:
                    Process Group must also be active to enable JobGeneration.

=== 04.02.2021 ============================================================================
 - Version........: 3.1502 // S.Gueth
 - Categorie......: JobControl Settings 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: JobControl Rules enhanced 
                    now you can define rules to control active status for JobControlRules // ProcessGroups // JobClients // Sites in a JobControl Rule
                    this rules will be triggered by "JobControl Rule" -> "Extendet Process State Control" -> [P.Control=#RuleName#]
                    Example:
                      [RuleID=ERR] [O.Type=*] [J.ResCode<>0] [J.ResMsg=*] [J.ResWarn=*] [P.Stat=D.ERR] [P.Control=DeactivateJobRule]
                      --> this will trigger the rule 'DeactivateJobRule' when an object has result code <> 0

=== 04.02.2021 ============================================================================
 - Version........: 3.1502 // S.Gueth
 - Categorie......: JobControl 
 - Additional Info: UpdDb=No Ver.Info 
 - Type...........: New: 
 - Description....: JobControl 'Extendet Process State Control' support's now usage of P.Control definition 
                    Syntax [P.Control=#RuleName#]
                    Can be used to trigger a specific JobControlActivRule that is defined in 'Job Control Rules' -> 'Job Def Extended 2' -> '3.4: JobMgr - Activation Status Control'
                    Example:
                      [RuleID=ERR] [O.Type=*] [J.ResCode<>0] [J.ResMsg=*] [J.ResWarn=*] [P.Stat=D.ERR] [P.Control=DeactivateJobRule]
                      --> this will trigger the rule 'DeactivateJobRule' when an object has result code <> 0

=== 14.12.2020 ============================================================================
 - Version........: 3.1502 // S.Gueth
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: added setting '9-Import All Dataset Types' in Sites -> ImportSettings3 
                    if set to TRUE, all dataset types will be imported (default is FALSE)

=== 09.12.2020 ============================================================================
 - Version........: 3.1502 // A.Stein
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: -Action "??" -SubAction "??"
                    
                    
                    Issue is now solved by code changes
                    New Methode implemented by code extensions
                    Enhancement implemented by code extensions

=== 18.11.2020 ============================================================================
 - Version........: 3.1502 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Replacment Variable extendet with
                     - #JobRule.JobName# it replaces JobControlRules J.JobName
                     - #Exa: if used JobRule has Name 'JobUpdatePart' then #JobRule.JobName# is replaced by 'JobUpdatePart' 
                     - #JobRule.ProcessDataPState# it replaces JobControlRules 'P.' + 'J.JobName'
                     - #Exa: if used JobRule has Name 'JobUpdatePart' then #JobRule.ProcessDataPState# is replaced by 'P.JobUpdatePart' 
                    This extendet variable can be used in Extendet JobObject selection
                    
                    Enhancement implemented by code extensions

=== 12.11.2020 ============================================================================
 - Version........: 3.1502 // J.Fes
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -Action "PLMPerfSyslogParser_2012_01" -SubAction "ViaNxSyslog"
                    
                    If in PLMPerfApplication 'Setup Data Import' setting 
                    Import Type is set to value: 'PerformanceLog with UserCount' 
                    then this SubAction will also trigger to collect UserCount value
                    
                    Enhancement implemented by code extensions

=== 14.10.2020 ============================================================================
 - Version........: 3.1502 // S.Gueth
 - Categorie......: JCT 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: -Action "PLMPerfSyslogParser_2012_01" -SubAction "ViaNxSyslog"
                    Parameter -importConfigName can now have wildcards
                    
                    Example: '3* [AL*][4711/A]'
                    
                    ImportConfigName supports now hashvariables 
                     to replace JobManager Object values in -importConfigName
                    
                    Example: '3* [AL*][#IR.ItemNameRev#]' -> '3* [AL*][4711/A]'
                    
                    All properties from class ObjectData_cls can be replaced with #PropertyName#
                    Example: #ObjectCliName# , #ObjectUgMaster_Type#
                    
                    All properties from class ObjectData_cls.Ir_cls can be replaced with #IR.PropertyName#
                    Example: #IR.ir_puid# , #IR.ItemName# , #IR.Rev# , #IR.ItemNameRev#

=== 01.10.2020 ============================================================================
 - Version........: 3.1502 // S.Gueth
 - Categorie......: CheckBox 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: Outputformat of CheckBox result report enhanced
                    Parthistroy list will now show from the latest part history entry, even if cb1 data has a newer entry then cb2 data

=== 26.08.2020 ============================================================================
 - Version........: 3.1502 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Replacment Variable extendet with
                     - #JobRule.ProcStateCol+1# #Exa: if current ProcStateCol05 it return ProcStateCol06
                     - #JobRule.ProcStateCol-1# #Exa: if current ProcStateCol05 it return ProcStateCol04
                     - #JobRule.ProcStateCol+2# #Exa: if current ProcStateCol05 it return ProcStateCol07
                     - #JobRule.ProcStateCol-2# #Exa: if current ProcStateCol05 it return ProcStateCol03
                    This extendet variable can be used in Extendet JobObject selection
                    
                    Enhancement implemented by code extensions

=== 19.08.2020 ============================================================================
 - Version........: 3.1502 // S.Gueth
 - Categorie......: Settings JCT CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBMoveCBFilesToCBArchiv"
                    Export CheckBox duration times to excel file for PLM Performance Analyse
                    Check CBMgrConfig Settings:
                    '05.4 CB Durations to CSV for PLMPerf Analyse'
                    '05.5 CB Durations CSV File PLMPerf Root Dir (full path)'

=== 17.08.2020 ============================================================================
 - Version........: 3.1502 // S.Gueth
 - Categorie......: JCT CheckBox 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBResultGen"
                    if a cgm file or tif file is missing on CheckBox Compare, an error will be set to the compair result

=== 14.08.2020 ============================================================================
 - Version........: 3.1502 // S.Gueth
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added new settings in: JobServer -> Sites -> ImportSettings 3 
                     5.01 - JM-TC.Sync:Print Sync Info after N Objects
                       Defines how often an info will be printed to GUI by syncing TC Objects with JobManager
                      17 - TC Objects Packet size on Sync
                       Defines how big the package of TC Objects should be on syncing the TC Site to JobManager

=== 05.08.2020 ============================================================================
 - Version........: 3.1502 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: Sites/Data Import -> Sync.Site.Data Actions failed with Exception
                    when dulicated ID's is found 
                    Issue is now solved by code changes

=== 05.08.2020 ============================================================================
 - Version........: 3.1502 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "MigIdeas2NX_2013_10" -SubAction "CMM_InpListGen"
                     cmm inputlist.xml element names changed 
                     from.: DSpuid
                     to...: dataset 
                     #todo: check if format is correct for CMMTypes: 'i-deas ProE SolidWork'  
                    Change is implemented by code extensions

=== 05.08.2020 ============================================================================
 - Version........: 3.1502 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "CMM2NX_2021_06" -SubAction "CMM_InpListGen"
                     cmm inputlist.xml element names changed 
                     from.: DSpuid
                     to...: dataset 
                     #todo: check if format is correct for CMMTypes: 'i-deas ProE SolidWork Catia'  
                    Change is implemented by code extensions

=== 03.08.2020 ============================================================================
 - Version........: 3.1502 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Description....: During Process Sites/Data -> Import * - Sync.Site an Issue happend comparing LastSave Date. 
                    More data as needet has been identified to sync.
                    Issue is now solved by code changes

=== 16.07.2020 ============================================================================
 - Version........: 3.1501 // S.Gueth
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: Issue happend on import when Owning Site ID is empty
                    Issue is now solved by code changes

=== 02.07.2020 ============================================================================
 - Version........: 3.1493 // S.Gueth
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: New settings in JobServer -> Sites -> ImportSettings 3 -> '4.16 - Set Analyse IR 'is used' in BOM (n) times'
                    If set to 0 the count how often the ItemRevsision is used will NOT be analysed (default)
                    If set to -1 the count how often the ItemRevsision is used will be imported
                    You can define a custom number, until it should be analyzied how often an Item Revision is used 
                    Hint:As higher the number, as more time is needed to get the count.

=== 02.07.2020 ============================================================================
 - Version........: 3.1493 // S.Gueth
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: added new settings in JobServer -> Sites -> ImportSettings 3 -> 4.15 - Import Check out Info true/false
                    If set to true the check out informations on Items, ItemRevisions and Datasets will be imported
                    default is true

=== 02.07.2020 ============================================================================
 - Version........: 3.1493 // S.Gueth
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: added sync Option in Sites/Data Import -> Sync.Site.Data -> 41 - Sync.Site [Checked Out Objects]
                    syncs JM.DB Data that is checked out in TC and finishs Import process
                    
                    added sync Option in Sites/Data Import -> Sync.Site.Data -> 42 - Sync.Site [Data O.NeedUpd>0 + Checked Out Obj]
                    syncs JM.DB Data that has O.Need.Upd flag and is checked out in TC and finishs Import process

=== 25.06.2020 ============================================================================
 - Version........: 3.1493 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: -Action "MigCmm3D2NX_2013_10" -SubAction "CMM_InpListGen"
                    added parameter '-CheckOutStatusAnalyse'
                    if set to true, it will be checked if the Dataset, ItemRevision or the BomViewRevision is checked out in Teamcenter
                    if any of these 3 items is checked out, thy will not be processed (default is true)

=== 25.06.2020 ============================================================================
 - Version........: 3.1493 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: -Action "MigCmm3D2NX_2013_10" -SubAction "CMM_InpListGen"
                    added parameter '-CheckOutStatusAnalyse'
                    if set to true, it will be checked if the Dataset, ItemRevision or the BomViewRevision is checked out in Teamcenter
                    if any of these 3 items is checked out, thy will not be processed (default is true)

=== 24.06.2020 ============================================================================
 - Version........: 3.1493 // S.Gueth
 - Categorie......: DB ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: added parameters for objects
                    O.isCheckedOut
                    O.CheckOut.User
                    O.CheckOut.Date

=== 22.06.2020 ============================================================================
 - Version........: 3.1493 // S.Gueth
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: fixed bug, that import was not interuppted, when tc database was no accessible
                    this could lead to the issue, that item revisons whee deleted when tc database dissappeared during the import
                    this is now fixed by code changes

=== 16.06.2020 ============================================================================
 - Version........: 3.1493 // S.Gueth
 - Categorie......: JobControl Settings 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: added two JobRule settings in JobControl Rule -> Job Def Extended 2 -> 5 Level Controller Rules
                    
                    5.1: Inculde Objects only from same level
                    Defines if only objects from the same level (minimal level) should be incuded in the jobpacket
                    Example:
                    Object 1 (Ap with 3 levels) --> include in packet: yes
                    Object 2 (Ap with 3 levels) --> include in packet: yes
                    Object 3 (Ap with 4 levels) --> include in packet: no 
                    Object 4 (Ap with 5 levels) --> include in packet: no
                    
                    5.2: Level controller rules
                    defines the level controller rules for the current job (look at description in the rules for detailed information)
                    
                    5.3: Stop job gen if LevelControlRules apply
                    Stops using futher JobRules to generate new Job, if this JobRule finds data but level controller rules lead to the result not to generate a new Job

=== 28.05.2020 ============================================================================
 - Version........: 3.1493 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: ProE add Data Type 
                     SWPrt (SolidWorks-SinglePart)
                     SWAsm (SolidWorks-Assembly)
                     SWDrw (SolidWorks-Drawing)

=== 18.04.2020 ============================================================================
 - Version........: 3.1492 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Importing data for 'Nativ Sites' is now more robust
                    Now import contiunes even when during directory cycling Exception happend 
                    In case an Exception happend an Exception message will be printed into the message box
                    
                    Issue is now solved by code changes

=== 10.04.2020 ============================================================================
 - Version........: 3.1491 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobClientTools extendet with -Action "RefileNative_2016_02" -SubAction "PartUpdateNative"
                    With this Methode it is possible to Update 'Native NXParts'

=== 08.04.2020 ============================================================================
 - Version........: 3.1491 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: List of Site where not displayed in 'JobServer -> Sites/Data Import'  
                    If all Site definitions where deactivated.
                    
                    Issue is now solved by code changes

=== 27.03.2020 ============================================================================
 - Version........: 3.1491 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Checkbox Manager could not carry out the comparison 
                    if CheckBox Text Data from Entity_Type25/Entity_Type26 did not contained DisplayedTextValues properties 
                    Issue is now solved by code changes

=== 25.03.2020 ============================================================================
 - Version........: 3.1491 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: TC SiteDef did not created SideDef specific sql 
                    if for example table 'PNX0APPLICATIONINFOSTORAGE' not exist in TC.DB
                    Depending on TC.schema this table is not existing
                    New definition is implemnted to turn this case into a waring only information 
                    Now SiteDef specific sql are created in this case
                    
                    Enhancement implemented by code extensions

=== 13.03.2020 ============================================================================
 - Version........: 3.1491 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobControl 'Extendet Process State Control' support's now usage of P.StatKey definition 
                    Syntax [PStatKey=#KeyName#]
                    PStatKey can be used for esay generate PStatus for OK/WRN/ERR
                    
                    #Example: insert into JobControl -> 'Extendet Process State Control' only following P.StatKey definition 
                    [P.StatKey=R1]
                     then O.PGr.(01..20).PStat will be set if process result
                     - is OK   O.PGr.(01..20).PStat='D.R1.OK' 
                     - has WRN O.PGr.(01..20).PStat='D.R1.WRN' 
                     - is ERR  O.PGr.(01..20).PStat='D.R1.ERR' 
                    
                    Enhancement implemented by code extensions

=== 12.03.2020 ============================================================================
 - Version........: 3.1491 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobControl 'Extendet Process State Control' support's now 
                    to set P.Status releative to current P.Group via Condition [P+n.Stat=XX]
                                                                                 |-> +n=+1..9 PGroups UP 
                    #Example: 'Extendet Process State Control'
                    [RuleID=OK]   [O.Type=*] [J.ResCode=0]  [J.ResMsg=*] [J.ResWarn=0] [P.Stat=D.OK]  [P+1.Stat=RUN.CB2]
                    [RuleID=WRN]  [O.Type=*] [J.ResCode=0]  [J.ResMsg=*] [J.ResWarn=1] [P.Stat=D.WRN] [P+1.Stat=RUN.CB2]
                    [RuleID=ERR]  [O.Type=*] [J.ResCode<>0] [J.ResMsg=*] [J.ResWarn=*] [P.Stat=D.ERR] [P+1.Stat=X.CB2]
                     Current Process Group = 'P.02' 
                     If condition apply to 'RuleID=OK'  then Object P.Group.Status  P.02=D.OK  // P.03=RUN.CB2
                     If condition apply to 'RuleID=WRN' then Object P.Group.Status  P.02=D.WRN // P.03=RUN.CB2
                     If condition apply to 'RuleID=ERR' then Object P.Group.Status  P.02=D.ERR // P.03=X.CB2
                    Enhancement implemented by code extensions

=== 08.03.2020 ============================================================================
 - Version........: 3.1491 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: Change: 
 - Description....: JobServer Native Data improved
                    
                    Now NX BOM Analyse via NX Utility '%UGII_BASE_DIR%\NXBIN\ugpc.exe' is improved
                    Utility is now using the part path search logical implemented by NX load option file. 
                    To Support this following new Optins are avilabel
                     - BOM Data read from NX.prt
                     - Nativ NX Load Option File
                    Following options are now avialabel in 'Sites/Data Import' -> 'Edit Site def.' -> 'Native Settings'
                     - write CAD.MetaData files 
                     - Nativ Data Clean -> avialabe in
                    
                    Enhancement implemented by code extensions

=== 19.02.2020 ============================================================================
 - Version........: 3.1491 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "GB_SAPNxCBProcess" -SubAction "GB_SAPNxCBProcess*" Option: -COLocCiMode "TestMode"
                    
                    If Option: -COLocCiMode "TestMode" has been used then SAP Unlog has been used if Process lead to issue.
                    Now if TestMode is active then SAP Unlog is not used anymore
                    Issue is now solved by code changes

=== 05.02.2020 ============================================================================
 - Version........: 3.1491 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: Site/Data Import enhanced:
                    Now JobMgr support on TC Sync (Item/ItemRevision):
                     1. Object 'Last Save Date'
                     2. Object 'Last Mod User'
                     3. Object 'Owing Groups' 
                    
                    1*  'Last Save Date' for Item/ItemRev/Datases are stored in JM.DB.
                         With this extension syncronisation between JobMgr.DB and TC.DB is optimiced.
                         Because in some TC-Tools/Methodes TC do not update LastMod date but
                         a change is registerd in LastSavDate
                    Hint 'Last Save Date' is avilable for TC.Site with Teamcenter Unified Architeture (TCUA)
                    
                    Enhancement implemented by code extensions

=== 03.02.2020 ============================================================================
 - Version........: 3.1491 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: JobControl rule do supports also selection criteria for sel: O.IrType
                    Job Control -> Edit JobControl Rules -> Job Def Extended 1 -> sel: O.IrType
                    Enhancement implemented by code extensions

=== 29.01.2020 ============================================================================
 - Version........: 3.1491 // S.Gueth
 - Categorie......: GUI Scripts/Params. 
 - Type...........: New: 
 - Description....: added Button to edit result classifications in Scripts/Params
                    Result Classification files must be in the ClientScript folder or in any subfolder
                    Result Classification files must have one of the following formats:
                    *ResultClassification*.xml
                    *ResClRule*.xml
                    *ClRule*.xml

=== 15.01.2020 ============================================================================
 - Version........: 3.1491 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobControl Rules Generating JobPacket's performance optimiced  
                    
                    - New posibility to define in JobRule if JobData selection is using 'ORDER' methodes.
                      #Doc: see settings in: 
                            'Edit JobControl Rule' -> 'Job Def Extended 2' -> '4 Job Object Selection Rules -> 4.0..4.4'
                      #Doc: In the case that JobData order not needed in the JobProcessing sequence, this option can be switched off.
                            This will accelerate the creation of jobs.
                            Usage example:  Switch off 'Order' 
                                            If order Then Of Singleparts - Assembly Parts has no impact On JobProcessing sequence
                    
                    - Object selection SQL methodes improved specialy for
                      #Doc: see settings in: 
                            'Edit JobControl Rule' -> 'JobDefinition' -> 'sel:O.Special:' DS of IR (DS Only)
                    
                    Enhancement implemented by code changes.

=== 21.11.2019 ============================================================================
 - Version........: 3.1490 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: CheckBox methodes enhanced
                    -Action "CBTools_2012_05" -SubAction "Compair2XmlFiles/CBResultGen"
                    Now you can define compair condition for CB1 Data - CB2 Data
                     - CB1_Younger_CB2 -or- CB2_Younger_CB1
                     - Max days diff beween CB1 - CB2 extract date
                     - CB1/CB2 Extracte Date must bee in time range
                    
                    see CB.Mgr -> 'CB Config' -> '02 Extract / Report Settings' -> '02.11 CBDBc CheckBoxData.Base.Compair defs.'
                    
                    Enhancement implemented by code extensions

=== 30.10.2019 ============================================================================
 - Version........: 3.1490 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: UpdDb=No 
 - Type...........: Doc: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBMoveCBFilesToCBArchiv"
                    in case Object TC Names did contained special caracters 
                    move of CB.xml files did end into an exception.
                    Issue is now solved by code changes

=== 16.10.2019 ============================================================================
 - Version........: 3.1490 // S.Gueth
 - Categorie......: GUI ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: In JobManager -> Objects Filter -> P.Dat -> Res.Msg
                    by default only errors will be listed on drop down
                    hold Shift key to list all results

=== 18.09.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: Doc: 
 - Description....: New settings avialbel for CheckBox compair process
                     - DR.View.ViewPartName check
                     - EN25.Name Do compare
                     - EN26.Name Do compare

=== 11.09.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Scripts/Params. 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: added row template for Scripts/Parameters to edit the script settings

=== 11.09.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Scripts/Params. 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: it is now possible to edit 'Scripts/Params' parameter in an external form
                      --> press the drop down button in the 'JC.Script(cmd).ParamExt' cell

=== 09.09.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Admin DB 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-6468
 - Description....: added ability to store custom/generic values in the JobManager Database
                    
                    see following functions in the class 'MyAppl_DataSource_cls'
                    GenericValueStoreInDatabase() --> stores or updates a generic value in th JobManager DB
                    GenericValueReadFromDatabase() --> get generic value from database,  when there was an issue to get the value or there is no value with the given name, nothing will be returned
                    GenericValueDeleteFromDB() --> function to delete generic value from datatable

=== 06.09.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Scripting 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: added Pause and Stop buttons fpr Task Sheduler Scripts
                    you can implememt methodes to pause or stop your custom script like this:
                    
                    
                    Example for Stop Script:
                    
                    If JS_ScriptingInterface.ScriptStopButtonWasClicked() Then
                       Dim stopMsg As String = "Script was stopped by user!"
                        InfoSysProtocol.PrintInfoLine(stopMsg)
                        ScriptReturn_r.ErrMsg = stopMsg
                        Return ScriptReturn_r
                    End If
                    
                    
                    Example for Pause Script:
                    
                    JS_ScriptingInterface.ScriptPauseCheck(InfoSysProtocol)

=== 22.08.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: added setting 'Analyse Multi-Cad Assemblies'
                    in JobServer -> Sites -> Import Settings 3 -> 13 - Analyse Multi-Cad Assemblies
                    If set to true (default is false), it will be analysed on import if an assembly has multicad components (only working for NX assemblies)
                    If the assembly has an ItemRevision in first BOM level with no UGMaster but with a JT dataset, the AP is marked as 'MultiCad_in1LevelBOM'
                    If the assembly has an ItemRevision in multi BOM level (not 1 BOM level) with no UGMaster but with a JT dataset, the AP is marked as 'MultiCad_inMultiLevelBOM'
                    check column 'O.AP.has Multi-CAD' in objects list to determin if the AP is Multi-CAD or not
                    check column 'O.AP.Multi-CAD IRs' in objects list to see the installed Multi-CAD Item Revisions
                    
                    Search for Multi-CAD AP in Objects List -> Filter -> AP -> Multi Cad AP

=== 12.08.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: ProcessGroups 
 - Type...........: New: 
 - Description....: it is now possible to reset a process group to its default values
                     JobServer -> ProcessGroups -> Extra -> Reset selected Process Group to default values...

=== 12.08.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: GUI Import Sites/Data Import JobControl Scripts/Params. 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: copy / duplicate lines in JobManager Gui
                    1. via context menu on the grid
                    2. via shortcuts:
                       Ctrl + D
                        --> Duplicate selected rows in the current grid
                       Ctrl + Shift + C
                        --> Copy selected datarows to the clipboard (serialized as xml string)
                       Ctrl + Shift + V
                        --> Paste serialized xml string to the grid

=== 07.08.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "PartUtility_2018_04" -SubAction "EVALUATE_TCDataSetNamedRefCleanUp"
                    New evaluation avilable for Action TCDataSetNamedRefCleanUp
                    Limitation: Evaluation is until now done only for UGPART-BBOX UGPART-ATTR UGPART-ATTRIBUTES Trushape-Data
                    New Methode implemented by code extension

=== 12.07.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBResultGen"
                    New Compair condition avilable:
                     MD08.1 Condition if NO reference found for RefSet and RefSet is Empty (MD:Ref.nf:RefSet.Empty)
                    Enhancemnt is implemneted via code changes

=== 04.07.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Enhanced: JobData1ToProcess 
                    Now JobData1ToProcess.xml and JobData2Result.xml  
                    contains  .ObjectIr.ir_Rank data
                    Enhancement is done by code changes

=== 04.07.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Optimisation: JobData1ToProcess reduced
                    Now JobData1ToProcess.xml and JobData2Result.xml  
                    do not contains SiteDef_cls.Import_Settings3_Obj in this .xml files
                    Enhancment is done by code changes

=== 27.06.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Import 
 - Type...........: Change: 
 - Description....: on Import with ReleaseDate the ImportIrLastReleaseDateBegin will be set to ImportIrLastReleaseDateBegin
                    when the last release date is newer then the last mod date

=== 03.06.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBMoveCBFilesToCBArchiv"
                    On extract NXCheckBox data now it is analysed if part contains Component View's 
                    See also settings at: 
                     'CheckBox MGR' -> 'CB Config'
                                        -> '05.7 CB DR.CompView Info add to Process ResMsgExtendet'
                    Hint: required NXCheckBox.Version >= V.2.0.1.25
                    Hint: avilable only for Data extracted with TC integration
                    Enhancment is done by code extension and NXCheckBox extract software

=== 01.06.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: CheckBox analyse enhanced 
                    Now we do read and compair: 
                     - APComp.IsDraftingComponent
                     - View.ViewPartName
                     - In case an Error happend P.Result Section returns [AS:ERR:IsDraft.Comp]
                    For using this methode CheckBox data need to be extracted with NXCheckBox Version V2.0.1.25

=== 27.05.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: TaskScheduler 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: Issue at TaskScheduler Process not correct handelt if 
                    In case of Date-Span in combination with Timepoint did not worked 
                    Issue has been that Schedule got deactivated even when Date-Span has been still valid.
                    #Example:
                    [DA=27.05.2019-30.05.2019 WD=1 WD=2 WD=3 WD=4 WD=5 WD=6 WD=7 TP=21:22]
                    Issue is now solved by code changes

=== 23.05.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added setting 'MD05 Centre of Gravity do compair' to checkbox settings
                    defines if 'Centre of Gravity' should be compared or not [Default=true]

=== 23.05.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added setting 'MD00.Model data do compair' to checkbox settings
                    defines if Model data is to be compared [Default=YES]
                    If 'NO' Model data will !! NOT !! be compared
                    If 'ProtoTypeOnly' only the prototype data will be compared
                    If 'SolidBodyAnalyseOnly' only the volume, moment of inertia and moment of gravity for reference data will be compared

=== 21.05.2019 ============================================================================
 - Version........: 3.1489 // A.Stein
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: Now its possible to use generic as DatasourceType in SiteDef
                    You can use custom scripts for different functions in the JobServer (for example for the DataImport to JobMgr)
                    
                    Issue is now solved by code changes

=== 17.05.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: JobControl 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: fixed bug, where under certain circumstances the free memory of the client was not measured correctly
                    Issue is now solved by code changes
                    please update JobServer and JobClient

=== 14.05.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added new option 'CGMNewerThenTif' for '04.2 Generate tif' in CheckBox Settings Manager
                    if set,  CB.tif files will only be generated when there is no tif for the cgm file or if the cgm file is newer then the coresponding tif file

=== 10.05.2019 ============================================================================
 - Version........: 3.1488 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: setting '05.8 CB Prototype Volume diffs to Excel' added to CB Settings manager
                    If activated, an excel file will be generated, where all prototype volume differences differences are collected
                    you can find the excel file in the following dir: #DataRootDir#\#Site#_DataCollection\GeometricVolumeAnalyse_CheckBoxDataCollection.xlsx
                    for definition of #DataRootDir#, please check '03.1 Data Root Dir' in CheckBox config settings

=== 08.05.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: CheckBox 
 - Type...........: Change: 
 - Description....: fixed a bug in CheckBox Manager 
                    where coresponding tif files migth not be found correctly when there are more then one sheets per specification

=== 03.05.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-5143
 - Description....: When import/Update via Site/Data Import -> Import Extended -> Import.Site.Data: 'controled by Release Date' 
                    See also 'IContr:Ir.ReleaseDateBegin' 
                    
                    Import behavior changed at the end of import process 
                     'IContr:Ir.ReleaseDateBegin' is set to youngest found IR.LastMode 
                     'IContr:Ir.ModDateBegin' datum is not changed 
                     'IContr:Ds.ModDateBegin' datum is not changed 
                    
                    This optimization minimices the Import/Update duration when using this methode.   
                    
                    Enhancment is implemented by code extension

=== 24.04.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: Do Update IR Rank analyse on import/update can be now switch ON/OFF
                    By default it is switched ON via value true.  
                    If set to true (default), IR Rank is analysed during data import
                    If set to false, IR Rank will not be analysed and set to 0
                    
                    Settings are avilabel for each TC-Site via:
                    Sites/Data Import -> open Edit Site def. dialog  
                      -> Import Stettings 3 
                       -> 4 - Import eXtendet 
                        -> 11 - O.Imp.Msg WRN/ERR analyse true/false

=== 24.04.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: O.Imp.Msg WRN/ERR analyse on import/update can be now switch ON/OFF
                    By default it is switched ON via value true.  
                    If set to true (default), O.Imp.Msg WRN/ERR is analysed during data import
                    
                    Settings are avialbel for each TC-Site via:
                    Sites/Data Import -> open Edit Site def. dialog  
                      -> Import Stettings 3 
                       -> 4 - Import eXtendet 
                        -> 11 - O.Imp.Msg WRN/ERR analyse true/false

=== 02.04.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: CheckBox compairs now DisplayedTextValues. 
                    if pre and post CheckBox data contains DisplayedTextValues data
                    
                    Hint:DisplayedTextValues will be extracted if NX9 and NxCheckBox_XX_V.2.0.1.24 or higher 
                    Is used during NXCheckBox extract process.  
                    
                    Important:
                    If DisplayedTextValues is found in both NxChecbBoxData.xml files then DisplayedTexts values will be compared.
                    In this case TextInfo.Texts analyse is then not used anymore (skiped). 
                    Reason for this change is that DisplayedTexts is the better - enhanced text compair methode.
                    
                    Enhancement implemented by code extensions

=== 02.04.2019 ============================================================================
 - Version........: 3.1489 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Change: 
 - Description....: CheckBox analyse enhanced now you can us following settings
                      - AssocEnt analyse can be deactivated 
                      - AssociativesNum analyse can be deactivated
                      - Remove all references from text
                    
                    Hint in some project cases it is helpfull do use this settings
                    because software changes in NX Versions result in some data no longer being comparable.   
                    Enhancements were introduced by programming

=== 27.03.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: ObjectJobResults 
 - Type...........: New: 
 - Description....: when you select a process group cell in the Objects grid of the JobServer
                    and you click on J.Link / J.Log button -> the last result link / job log file for the coresponding process column will be opend

=== 26.03.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Settings 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-6152
 - Description....: changed 'Host Memory Usage Settings' in JObManager settings from percentage to absolute values
                    Memory usage check returns OK, if the current available free Memory is higher then the given Value (default 2000mb)
                    Memory usage check returns ERR, if the available free memory is lower then then given Value (default 1000 mb)

=== 26.03.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added setting '02.10 Clean Up CB Files when Compair is OK' in CheckBox config settings
                    Defines if extracted NXCheckBox files (xml, cgm, tif, txt) should be deleted when CheckBox Compair is OK (result code is 0 and result has no warning)

=== 21.03.2019 ============================================================================
 - Version........: 3.1489 // S.Gueth
 - Categorie......: Settings 
 - Type...........: New: 
 - Description....: added function for CheckBox CleanUp -> 'by CB Compair Result'
                    deletes all CheckBox, tif, cgm and syslog files where latest CB compair result in JobManager is OK
                      -> where Result Code is 0 and has no WRN

=== 20.03.2019 ============================================================================
 - Version........: 3.1488 // S.Gueth
 - Categorie......: GUI JobControl Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: New: 
 - Description....: added new Filter in JobControl Rules for Object Save Version
                     -> JobControl Rules
                          -> Job Def Extended 1
                              -> sel:O.Saved.With.RelVer

=== 20.03.2019 ============================================================================
 - Version........: 3.1488 // S.Gueth
 - Categorie......: GUI ObjectList 
 - Type...........: New: 
 - Description....: added filter for Object.Save.Version to JobManager Objects List Filter
                      -> Objects List
                          -> Spec
                              -> O.Save.Vers:

=== 19.03.2019 ============================================================================
 - Version........: 3.1488 // S.Gueth
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-6241
 - Description....: TC - NX release version on import/update can be now switch ON/OFF 
                    By default it is switched ON via value true.  
                    If set to true, NX release version will be imported from teamcenter and stored in O.SaveVersion in JobManager
                    If TC read performance is low please switch off NX release version.
                    
                    hint: table PNX0APPLICATIONINFOSTORAGE and PUGPARTATTRIBUTES need to be available in teamcenter
                    
                    Settings are avialbel for each TC-Site via:
                    Sites/Data Import -> open Edit Site def. dialog  
                      -> Import Stettings 3 
                       -> 4 - Import eXtendet 
                        -> 10 - get NX release version on import/update ON/OFF

=== 08.03.2019 ============================================================================
 - Version........: 3.1488 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: setting '05.6 CB Attribute diffs to Excel' added to CB Settings manager
                    If activated, an excel file will be generated, where all Attribute differences are collected
                    you can find the excel file in the following dir: #DataRootDir#\#Site#_DataCollection\Attribute_CheckBoxDataCollection.xlsx
                    for definition of #DataRootDir#, please check '03.1 Data Root Dir' in CheckBox config settings

=== 04.03.2019 ============================================================================
 - Version........: 3.1488 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Job.Process header informations new formated. 
                    Now you have better overview about the JobProcess Details and Versions.
                    Now Action.SubActionSettingsXML is now also includet Process header
                    #Example:
                    JCT.Version.....................: 2.12109.3001.2014
                    Action.Version..................: V2019-03-30.04/J.Fes
                    Action.Name.....................: ActionName_2013_10
                    Action.SubAction................: SubActionName
                    Action.SubActionSettingsXML.....: SubActionSettings.xml 
                    Job.Name........................: TC83_PU_AP_N_07500_addPLM
                    Job.Start.......................: 30.01.19 15:01

=== 28.02.2019 ============================================================================
 - Version........: 3.1488 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: Checks NOW if mapped and dublicated empty Attributes are found in CB-Data.xml 
                     
                    Example: 
                     - we find in CB-Data.xml attributes Material='' NX_Material='Mat001'  
                     - and Attribute Mapping condition defines to mapp 'Material' to: 'NX_Material'  
                     - after Mapping the Attributes we see folowing values:
                     - *1 NX_Material='Mat001'
                     - *2 NX_Material=''
                     
                    The updated algorithem removes the empty attribute *2 NX_Material='' 
                    If new setting: 'PH.Attribute Mapper ignore dublicated and empty attributes=false' 
                     
                    Please Check new setting 'PH.Attribute Mapper ignore dublicated and empty attributes' 
                    Methodes are implemented by code changes

=== 22.02.2019 ============================================================================
 - Version........: 3.1488 // S.Gueth
 - Categorie......: Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 

=== 22.02.2019 ============================================================================
 - Version........: 3.1488 // S.Gueth
 - Categorie......: CommandLineArgs Admin 
 - Type...........: New: 
 - Description....: start JobClient in Debug mode: set command line parameter /JobClientStartMode DebugMode
                    start JobClient in Debug mode: set command line parameter /JobClientStartMode TestAndDebugMode

=== 06.02.2019 ============================================================================
 - Version........: 3.1488 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: Job Control Activ Status Rules can now be defined in Result Classifications
                    If a result classification matches, the defined 'Job Control Activ Status Rules' will be triggered

=== 11.01.2019 ============================================================================
 - Version........: 3.1488 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: Object List Item + Ir + DS release status supports now 255 chars.
                    Change is done via upsize data colume from 32 to 255 chars Update Database schema is required

=== 19.12.2018 ============================================================================
 - Version........: 3.1488 // J.Fes
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: JobClinet start Performance improved
                    There for we enhanced methodes to get Local Resource informations for Drives CPU and Memory
                    Addition we now reading Local JobInformations only if needet. 
                    Improvment is done by code changes

=== 11.12.2018 ============================================================================
 - Version........: 3.1488 // S.Gueth
 - Categorie......: GUI 
 - Type...........: New: 
 - Description....: parameter /DrawingIndexSearchUIShow for JobServer
                    if set, a special gui will be showed, only for drawing indexing search

=== 08.12.2018 ============================================================================
 - Version........: 3.1488 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-6104
 - Description....: added 'MD.Volume 01 Check Method' in Check Box Compare Settings
                    defines the check method for the volume compare
                    Both.................: Volume will be compared by absolute values and percentage values (see rules: MD02.Volume and MD03.Volume)
                    Volume_Value_Dif.....: Volume will be compared by absolute values (see rule: MD02.Volume)
                    Volume_Percentage_Dif: Volume will be compared by percentage values (see rule: MD03.Volume)
                    Ignore...............: Volume compare will be ignored

=== 28.11.2018 ============================================================================
 - Version........: 3.1487 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -Action "CustomCmdTools_2016_04" -SubAction "VPMapProTextExportFromTif"
                    subaction for exporting texts from tif files via vmap pro

=== 28.11.2018 ============================================================================
 - Version........: 3.1487 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: New: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBMoveCBFilesToCBArchiv"
                    added parameter 'CBDrwIdxSearchData_Import'
                    If this parameter is set for eatch Part the displayed text of every entity 
                    will be imported into JobMgr.DB as drawing indexing search data.
                    The imported drawing texts and can be searched via JobManager UI. 
                    This enhanced methode gives you the possibility to find the parts where these drawing texts are contained.

=== 15.11.2018 ============================================================================
 - Version........: 3.1487 // J.Fes
 - Categorie......: Scripts/Params. 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Parameter settings for NX-Refile and NX-PartUpdate updated 
                    if JC.Script(cmd) matches    parameters are shown for     
                      - *Refile*Nativ*\*    ->   RefileNativ
                      - *Refile*SAP*\*      ->   RefileNativ
                    
                      - *RefileNX*\*        ->   RefileTc
                      - Rf*\*               ->   RefileTc
                    
                      - *PartU*Nativ*       ->   PartUtilNativ
                      - *PartU*SAP*         ->   PartUtilNativ
                      - 
                      - *PartU*TC*          ->   PartUtilTC

=== 31.10.2018 ============================================================================
 - Version........: 3.1486 // S.Gueth
 - Categorie......: CommandLineArgs JobControl JCT 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-6056
 - Description....: -Action "JobControl_2018_10" -SubAction "ControlActivStatus"
                    Controls Active Status for JobComputer JobRules JobGroups and Sites
                    Parameters:
                    -JobRoot_DP   "c:\temp\xx"						 #Doc: root dir of current running job
                    -Type         "JobComputer|JobGroup|JobRule|Site"  #Doc: defines the type Of the job control active status
                    -Name			"addPLM-*;JF-21"					 #Doc: defines the name Of the job control type, you can define multiple names seperated With ; And you can use wildcards (*)
                    -Status		"ON|OFF|Activ|Inactiv"				 #Doc: defines the status Of the job control that should be Set, you can Set On / OFF Or Activ / Inactiv
                    -Description	"test description"					 #Doc: defines a description / note, that will be displayed In the JobServer at JobControlInfo

=== 23.10.2018 ============================================================================
 - Version........: 3.1481 // J.Fes
 - Categorie......: JobControl JCT 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-1145
 - Description....: extract a customized import list for job data to process
                    -Action "JobDataExtract_2013_10" -SubAction "InputListExtract"
                     cmd Example: -format "#ItemId#_REV:_#Rev#_Type:_#ObjectType#" -JobRoot_DP "C:\temp\job1" -inputList_DPNE "#JobRoot_DP#\inputList.txt"
                    
                     format.: defines the content of each inputlist, you can use these variables:
                     #ItemId#
                     #IrId#
                     #Rev#
                     #ObjectId#
                     #ObjectName#
                     #ObjectType#
                     #ObjectOwningSiteID#
                     #ObjectFromSiteID#
                     #ObjectCliName#
                     #ObjectCliNameForNX#
                     #ObjectFs_Vol#
                     #ObjectGroup#
                     #ObjectOwner#
                     #ObjectPuid#
                     #IrNameCLI#
                     #ObjectCreateDate#
                     #ObjectFs_DPNE#
                     #ObjectLastModDate#
                     #ObjectLastModUser#
                     #ObjectUgMaster_Type#
                     #ProcStateCol01# .. #ProcStateCol20# 
                     #ProcStateColRf#
                     #ProcStateColMc#
                     ....
                    #New: 3.1481;23.10.2018;New: List extract support's now also following valiables  
                     #ObjectUgMaster_APLevel#
                     #ObjectUgMaster_CompCount#
                     #ObjectUgMaster_CompCountUnique#
                     #ObjectUgMaster_Lev1CompN#
                     #ObjectUgMaster_Lev1CompUniqueN#
                     #ObjectAttr01# .. #ObjectAttr10#

=== 11.09.2018 ============================================================================
 - Version........: 3.1475 // S.Gueth
 - Categorie......: GUI ObjectList 
 - Type...........: New: 
 - Description....: added Pivot functionality
                    Pivot data can be filtered and displayed in Objects List tab
                    Pivot statistics can be exported via Excel

=== 31.08.2018 ============================================================================
 - Version........: 3.1475 // S.Gueth
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: TCData Quality Check: renamed 'PFRefFolder' check to 'PFCheck'

=== 30.08.2018 ============================================================================
 - Version........: 3.1475 // S.Gueth
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: -Action "TCDataQuality_2016_09" -SubAction "TCDataQualityCheckVer1"
                    cumulated all 5 part family checks of ir to 1 result

=== 27.08.2018 ============================================================================
 - Version........: 3.1475 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added 'Import CB Drawing Data to JobMgr DB' to CheckBox settings manager config
                    If set to true, CheckBox drawing data will be imported into JobManager database

=== 10.08.2018 ============================================================================
 - Version........: 3.1474 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: During Import/Update Sync last modification date of dataset is also used

=== 23.07.2018 ============================================================================
 - Version........: 3.1472 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "RefileNative_2016_02" -SubAction "PartByPart"
                    If option -convert_mcs has been used then filename parameter -convert_mcs=<filename>
                    has been incorrect generated.
                    Issue is now solved by code changes

=== 21.06.2018 ============================================================================
 - Version........: 3.1468 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBMoveCBFilesToCBArchiv"
                    Export CheckBox duration times to excel file
                    Check CBMgrConfig Settings:
                    'CB Duration To Excel File'
                    'CB Duration Excel File (full path and name)'

=== 30.05.2018 ============================================================================
 - Version........: 3.1468 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Description....: Import updatet: During Import an 'NX Partfamily Master' the PF-Master-Member check will be called. 
                    'PF-Master-Member check' will list all Partfamily Members and reports status of Partfamily Members
                    Example:
                     |...........................................................................................
                     | PF-Master-Member check for...: PFMaster/A(= PF - Master)
                     | PF-Members...................: ItemId/ RevId                 Result
                     | PF-Member  1/2 ..............: PFMember-1/A                  WRN_361_PFMemberFolderRef
                     | PF-Member  2/2 ..............: PFMember-2/A                  OK
                     |...........................................................................................
                     | PF-Master-Member check result: PFMaster/ A(= PF - Master)
                     | PF-Member (n)................: 2
                     | PF-Member (n) has Issues.....: 1
                     | PF-Master Result.............: WRN_366_PFMasterMemberHasWRN;WRN_361_PFMemberFolderRef
                     |...........................................................................................
                    
                    Hint: if you want to redo the PF-Master-Member check please 
                    Import manually the PF-Master Object

=== 30.05.2018 ============================================================================
 - Version........: 3.1468 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: Change: 
 - Description....: Import updatet: 
                    
                    During Import folowing WRN and ERR are now proved:
                    
                     WRN_100_BOMAnaylse_LevMax       appear if during 'AP-BOM Analyse' max levels is exceeded
                     WRN_110_BOMAnaylse_CompMax      appear if during 'AP-BOM Analyse' max comp count is exceeded
                     WRN_120_BOMAnaylse_TimeMax      appear if during 'AP-BOM Analyse' max duration is exceeded
                    
                     ERR_130_BOM_isSelfRef           appear if during 'AP-BOM Analyse' returns that BOM is selfreferncing  
                     ERR_131_BOM_SubAp_isSelfRef     appear if during 'AP-BOM Analyse' returns that a Sub of BOM BOM is selfreferncing  
                     
                     WRN_140_DSHasMultiIrRefs        appear if found that a Dataset has refernces in mulible revisions
                     ERR_150_IrHasDsWithSameName     appear if found that a revision has Datasets with same name of same type
                     
                     ERR_200_DateTimeIsNull          appear if found that Date Time Data are not set. 
                     ERR_201_DateTimeFormatWrong     appear if found that a DateTime format has wrong format
                     WRN_202_RelDateIrToStatusObjDif appears when last release date of IR and release date of 
                                                     work Space object (IR) are different (New: 3.1463;30.04.2018;S.Gueth)
                     ERR_203_RelDateIrIsMissing      appears when last release date of IR (work space object) exists and 
                                                     release Date of status object IR Is empty (New: 3.1463;30.04.2018;S.Gueth)
                     ERR_204_RelDateWSOIsMissing     appears when last release date of IR (work space object) is empty 
                                                     and release date of status object IR exists (New: 3.1463;30.04.2018;S.Gueth)
                     
                     ERR_301_DSIsMissingFile         appear if found that Dataset has no 'CAD-Part' File in named refernce
                     ERR_302_DSHasMutiCADFiles       appear if found that Dataset has more then 1 'CAD-Part' File in named refernce
                     
                     Partfamily Members #New: 3.1464;11.05.2018;J.Fes
                     WRN_361_PFMemberFolderRef       appear if Partfamily Member Item is not below 'PFMaster-Item-folder'
                     WRN_362_PFMasterFolderRef       appear if Partfamily Master has no Partfamily 'PFMaster-Item-folder' 
                     WRN_363_PFMasterNoPFMember      appear if Partfamily Master is missing Partfamily Members
                     WRN_364_PFMasterMemberFolderRef appear if Partfamily Master and Members is missing 'PFMaster-Item-folder'
                     WRN_365_PFMasterMissing         appear if Partfamily Members is missing Partfamily Master
                     WRN_366_PFMasterMemberHasWRN    appear if Partfamily Members of PartFamiliy Master has warings

=== 30.05.2018 ============================================================================
 - Version........: 3.1467 // S.Gueth
 - Categorie......: ObjectList 
 - Type...........: Change: 
 - Description....: -Renamed Button "Open NX" in Objects List to "Open File"
                    this button will open all NX Datasets with NX Router
                    and all other files will be opend with windows default application

=== 24.05.2018 ============================================================================
 - Version........: 3.1466 // J.Fes
 - Categorie......: TaskScheduler 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Description....: TC - Volume Revoke Grand process avilabel
                    for setup and usage please setup TaskSheduler
                     following is required:
                     - JobMgr Version - 3.1466;24.05.2018 or later
                     - installed and setup scripts 
                     - 10-JobScripts\VolumeRevokeGrant_TC 
                     - setup please review \Documentation\JobManager_VolumeRevokeGrand_TaskShedulerSettings.txt
                    Issue is now solved by code changes

=== 18.05.2018 ============================================================================
 - Version........: 3.1464 // S.Gueth
 - Categorie......: Scripting Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: variable ${JobMgr_Test} = ON will be set in *.ps1 script, when debug mode is on activated in JobClient

=== 18.05.2018 ============================================================================
 - Version........: 3.1464 // S.Gueth
 - Categorie......: Scripting Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: variable ${JobMgr_Debug} = ON will be set in *.ps1 script, when debug mode is on activated in JobClient

=== 17.05.2018 ============================================================================
 - Version........: 3.1465 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Change: 

=== 17.05.2018 ============================================================================
 - Version........: 3.1464 // S.Gueth
 - Categorie......: JobControl 
 - Type...........: Change: 
 - Description....: if the path to JobServer Settings xml file is not available on the JobClient, JobClient won't stop anymore
                    JobClient will now print the following message:
                    ERR: JobServerSettings Load: please check if path to JobServer Settings xml file is available!
                         JobServerSettings Load: Waiting 10 seconds --> try to reload settings

=== 16.05.2018 ============================================================================
 - Version........: 3.1464 // A.Stein
 - Categorie......: Import ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Now it is possible to import all components of an assembly from native nx-data
                    see Object List -> Extra -> Import Data of Items/IRs

=== 16.05.2018 ============================================================================
 - Version........: 3.1464 // A.Stein
 - Categorie......: Import ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Now it is possible to import all components of an assembly from native nx-data
                    see Object List -> Extra -> Import Data of Items/IRs (incl. Assembly Components)

=== 16.05.2018 ============================================================================
 - Version........: 3.1464 // A.Stein
 - Categorie......: Import ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Now it is possible to import all components of an assembly from native nx-data
                    see Object List -> Extra -> Import Data of Items/IRs

=== 16.05.2018 ============================================================================
 - Version........: 3.1464 // A.Stein
 - Categorie......: Import ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Now it is possible to import all components of an assembly from native nx-data
                    see Object List -> Extra -> Import Data of Items/IRs (incl. Assembly Components)

=== 15.05.2018 ============================================================================
 - Version........: 3.1464 // S.Gueth
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -TC - Dataimport: Release Status Import All can now be switch ON/OFF during import 
                    By default it Is switched OFF via value false.   
                    
                    Settings are avialbel for each TC-Site via
                    Sites/ Data Import -> open Edit Site def. dialog   
                                 -> Import Stettings 3  
                                  -> 4 - Import eXtendet  
                                   -> 8 - Import all release states ON/OFF

=== 11.05.2018 ============================================================================
 - Version........: 3.1464 // J.Fes
 - Categorie......: Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: Change: 
 - Description....: PartFamily anlayse during import/update has been improved
                    Now it is anlayse that PartFamily Master contains PartFamily folder ('PFMaster-Item-folder') below Item of PartFamily ItemRevision
                    Now it is anlayse that PartFamily Member Item referenced in PartFamily-Folder ('PFMaster-Item-folder')
                    
                    Issue is now solved by code changes

=== 11.05.2018 ============================================================================
 - Version........: 3.1464 // J.Fes
 - Categorie......: Import Settings 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: TC - Dataimport Partfamily-Analyse during import/Update can be now switch ON/OFF 
                    By default it is switched ON via value true.  
                    If TC read performance is low please switch off Partfamily Analyse.
                    
                    Settings are avialbel for each TC-Site via:
                    Sites/Data Import -> open Edit Site def. dialog  
                      -> Import Stettings 3 
                       -> 4 - Import eXtendet 
                        -> 7 - Partfamily-Analyse on import/update ON/OFF

=== 09.05.2018 ============================================================================
 - Version........: 3.1463 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: -Action "TcExtractData_2013_10" -SubAction "TCDataExtract"
                    Subaction renamed from "TCDataExtract_ForRefile" to "TCDataExtract"

=== 04.05.2018 ============================================================================
 - Version........: 3.1463 // S.Gueth
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: site setting '6 - Compare IR WSO rel date and status obj rel date on import' added
                    If set to true, release date of IR Work Space Object and last status object will be compared during import
                    on deviation: WRN_202_RelDateIrToStatusObjDif will be set to import ERR/WRN

=== 02.05.2018 ============================================================================
 - Version........: 3.1463 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added 1.3.3 Check relese date WSO and last release dtae of status object
                    If ON it checks if the release date of the IR worksapce object and the release date of the last status object of the IR are the same

=== 30.04.2018 ============================================================================
 - Version........: 3.1463 // S.Gueth
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: ChecBox - Result Viewer did NOT displayed in all cases the .tif files 
                    when there are mor then 2 different extracts
                    Issue is solved by code changes.

=== 10.04.2018 ============================================================================
 - Version........: 3.1462 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: UpdDb=No Check.Settings 
 - Type...........: New: 
 - Description....: JobScripts parameters enhanced
                    JobParameter supports now settings dialog for:
                     RefileTc RefileNativ PartUtilTC PartUtilNativ 
                     
                    if 'JC.Script(cmd)' matches folowig values this dialog opens  
                                  
                     JC.Script(cmd)         ->  Dialog:         
                     *RefileNX*\* or Rf*\*  ->  RefileTc       
                     *Refile*Nativ*\*       ->  RefileNativ    
                     *PartUtil*TC*\*        ->  PartUtilTC     
                     *PartUtil*Nativ*\*     ->  PartUtilNativ

=== 29.03.2018 ============================================================================
 - Version........: 3.1460 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: method M3_byAutomation added for parameter BOMCompairBOMRefFindMethode
                    try to find coresponding BOM line first by 'M1_byBOMPuid' if not found by 'M2_byBOMData'

=== 26.03.2018 ============================================================================
 - Version........: 3.1459 // S.Gueth
 - Categorie......: Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: Compression Archive Format can no be set specifically for server and client in JobManager settings
                    default for server is ZIP
                    default for client is 7z

=== 25.03.2018 ============================================================================
 - Version........: 3.1460 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Data Model: Customer Attributes.
                    
                    It does support's now also to read Item and ItemRev Attributes

=== 06.03.2018 ============================================================================
 - Version........: 3.1456 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -Action "RefileTC_2012_01" -SubAction "evaluate"
                    parameter: UGPartCheck (if set, UGPart named references will be checked)
                    parameter: TSOCheck (if set, TSO Named refferences will be checked)

=== 06.03.2018 ============================================================================
 - Version........: 3.1456 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 

=== 02.03.2018 ============================================================================
 - Version........: 3.1456 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Description....: Object list supports now new Columes
                    - Obj.in.Gr(s).: contains Groups where Object are added into 
                    - Obj.in.Sel.Gr: contains only first Group (by alpha order)  
                                     where Object is added into  
                                       
                    #Example: Group G1 + G2 + G3 is selected                  
                      ObjId   'in Groups'  'Obj.in.Gr(s)' 'Obj.in.Sel.Gr'                 
                      Obj01   'G1,G2,G3'   'G1,G2,G3'     'G1'                 
                      Obj02   'G2,G3'      'G2,G3'        'G2'                 
                      Obj03   'G1,G3'      'G1,G3'        'G1'                 
                      Obj04   'G3'         'G3'           'G3'                 
                                       
                                       
                    Notes: 
                    If you use have this colume visible in your ObjectList 
                    and you are NOT filtering via Groups
                    and you do not use the Groups in the grid 
                    then please remove this Columes from Datagrid  
                    because dataread performance is slower.

=== 27.02.2018 ============================================================================
 - Version........: 3.1454 // A.Stein
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "NxDataProcessing_2013_09" -SubAction "NxImportFiles"
                    now it is possible to import additional Files to TC
                    via JobMgr cmd tools

=== 27.02.2018 ============================================================================
 - Version........: 3.1454 // A.Stein
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "NxDataProcessing_2013_09" -SubAction "NxImportFiles"
                    now it is possible to import additional Files to TC
                    via JobMgr cmd tools

=== 08.02.2018 ============================================================================
 - Version........: 3.1453 // J.Fes
 - Categorie......: DB 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: Process result data table extendet:
                    Now data colume storing JobResult Links are extendet from 255 to 450 nvarchars
                    This change is required because customer need long path names to JobMgrDataStore directory

=== 07.02.2018 ============================================================================
 - Version........: 3.1453 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobControl Rules enhanced 
                    Now you have the posibility in a JobRule to define extend JC.Script(cmd).ParamExt
                    #Doc: Value will be appendet to refferenced J.Script/Param -> JC.Script(cmd).ParamExt
                    #Doc: With this enhancemnt we provide easy definition of JobVariants

=== 02.02.2018 ============================================================================
 - Version........: 3.1451 // A.Stein
 - Categorie......: Import 
 - Type...........: New: Doc: 
 - Description....: Clear Results
                        Dim ResGroupDefault As New ResultSecs_cls(AttrSync, 0)
                        '-- #Step: (only Optional) Create additional ResGroup 
                        ' Dim ResGroup01 As New ResultSecs_cls(Gr01, -1)
                    
                        '-- #Step: Create and add ResSection(s) to ResultSecsGr
                        Dim RSecMetaData As ResultSec_cls = Me.ResGroupDefault.AddNewResultSection(MetaData, 0)
                        Dim RSecAttrSync As ResultSec_cls = Me.ResGroupDefault.AddNewResultSection(AttrSync, 0)
                    
                    
                    
                    
                        ''' <summary>
                        ''' fucntion to execute attribute sync for all objects
                        ''' </summary>
                        ''' <remarks> 
                        ''' #New: 3.145105.02.2018A.Stein

=== 02.02.2018 ============================================================================
 - Version........: 3.1451 // A.Stein
 - Type...........: New: Doc: 
 - Description....: Clear Results
                        Dim ResGroupDefault As New ResultSecs_cls(AttrSync, 0)
                        '-- #Step: (only Optional) Create additional ResGroup 
                        ' Dim ResGroup01 As New ResultSecs_cls(Gr01, -1)
                    
                        '-- #Step: Create and add ResSection(s) to ResultSecsGr
                        Dim RSecMetaData As ResultSec_cls = Me.ResGroupDefault.AddNewResultSection(MetaData, 0)
                        Dim RSecAttrSync As ResultSec_cls = Me.ResGroupDefault.AddNewResultSection(AttrSync, 0)
                        Dim RSecSetReleaseState As ResultSec_cls = Me.ResGroupDefault.AddNewResultSection(RelStatus, 0)
                    
                    
                    
                    
                        ''' <summary>
                        ''' fucntion to execute attribute sync for all objects
                        ''' </summary>
                        ''' <remarks> 
                        ''' #New: 3.145105.02.2018A.Stein

=== 02.02.2018 ============================================================================
 - Version........: 3.1451 // A.Stein
 - Categorie......: Import 
 - Type...........: New: Doc: 
 - Description....: Clear Results
                            'Dim ResGroupDefault As New ResultSecs_cls(AttrSync, 0)
                            '-- #Step: (only Optional) Create additional ResGroup 
                            ' Dim ResGroup01 As New ResultSecs_cls(Gr01, -1)
                    
                            '-- #Step: Create and add ResSection(s) to ResultSecsGr
                            'Dim RSecMetaData As ResultSec_cls = Me.ResGroupDefault.AddNewResultSection(MetaData, 0)
                    
                    
                    
                    
                    
                            ''' <summary>
                            ''' fucntion to execute attribute sync for all objects
                            ''' </summary>
                            ''' <remarks> 
                            ''' #New: 3.145105.02.2018A.Stein

=== 30.01.2018 ============================================================================
 - Version........: 3.1450 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: New: 
 - Description....: Process Results Links now can be updated via
                    Sites/Data Import-> Admin-> 2.1 - Update JobResult Links (!- dry run -!) 
                    Sites/Data Import-> Admin-> 2.2 - Update JobResult Links (!- Activ run -!)
                    
                    If this function is used 
                    Then existing JobLinks will be updatet in JobMgr.DB
                    Update is using Replacment rules form ServerSettings --> 'Replace Rules for J.Links' 
                    Please review settings befor using

=== 25.01.2018 ============================================================================
 - Version........: 3.1449 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "NxDataProcessing_2013_09" -SubAction "NxToTc_UG_Clone"
                    now it is possible to import NX.prt files to TC
                    via JobMgr cmd tools

=== 25.01.2018 ============================================================================
 - Version........: 3.1449 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "NxDataProcessing_2013_09" -SubAction "StepToNx"
                    now it posible to convert step files to nativ NX.prt parts 
                    via JobMgr cmd tools

=== 22.01.2018 ============================================================================
 - Version........: 3.1448 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction "CMM_ResultEval"
                    - Migration report evaluation enhanced
                    
                    - Migration report evaluation ResultCode (P.Res.Code) 
                      will be set to to part types 'ProPrt' and 'IdeasPart'
                    .
                    - Migration report evaluation Message (P.Res.Msg.) 
                      will be set to all part types 
                      including ProPrt,ProAsm,ProDrw,IdeasPart,IdeasAssembly,IdeasDrawing

=== 22.01.2018 ============================================================================
 - Version........: 3.1448 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction "CMM_ResultEval"
                    - Migration report evaluation enhanced
                    
                    - Migration report evaluation ResultCode (P.Res.Code) 
                      will be set to to part types 'ProPrt' and 'IdeasPart'
                    .
                    - Migration report evaluation Message (P.Res.Msg.) 
                      will be set to all part types 
                      including ProPrt,ProAsm,ProDrw,IdeasPart,IdeasAssembly,IdeasDrawing

=== 20.01.2018 ============================================================================
 - Version........: 3.1448 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: JobComputer definitions contains now new colume to select TC-Password file

=== 18.01.2018 ============================================================================
 - Version........: 3.1447 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: Job Computers settings enhanced now it is posible to define a tc password file.
                    If using TC.Passw.File then tc commanline tool may use password file (-pw ..)
                    instead of using plain text password (-p ..) in command line.
                    Hint: Please check if TC 
                    see 'Job Control' -> 'Job Computers'
                    Issue is now solved by code changes

=== 11.12.2017 ============================================================================
 - Version........: 3.1443 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "ANY" -SubAction "ANY"
                    If at final P.Res.Code = '' (empty = blank)    
                    then result is set to 
                                P.Res.Code = 'UNK-01'

=== 11.12.2017 ============================================================================
 - Version........: 3.1443 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBMoveCBFilesToCBArchiv"
                    NX.Sylog.END Analyse Enhanced
                    For Objects the correct NX.Syslog.section END: is now found 
                    CheckBox returns now [NX.Syslog.END:OK]

=== 08.12.2017 ============================================================================
 - Version........: 3.1443 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added new check to tc data quality:
                    2.3 Check if Dataset Versions are refferenced by folders

=== 01.12.2017 ============================================================================
 - Version........: 3.1442 // S.Gueth
 - Categorie......: Scripts/Params. 
 - Type...........: New: 
 - Description....: added Drop Down button to JobScript coloumn in Scripts/Parameters in the JobServer
                    on clicking this button, it will show you the documentation files of the current script

=== 29.11.2017 ============================================================================
 - Version........: 3.1442 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Description....: Compair Rule: Dimenson objects (Entity_Type26_SubType*) that is visible in the drawing are analyzed
                    This Objects has values Status = 3 and ViewDependent <> '' (not empty)
                    
                    #Doc: this rule is defined since Version 2.0688; 23.09.2010

=== 29.11.2017 ============================================================================
 - Version........: 3.1442 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Description....: Compair Rule: draft objects (Entity_Type25_SubType*) that is visible in the drawing are analyzed
                    This Objects has values Status = 3 and ViewDependent <> '' (not empty)
                    
                    #Doc: this rule is defined since Version 2.0688; 23.09.2010

=== 28.11.2017 ============================================================================
 - Version........: 3.1442 // J.Fes
 - Categorie......: JCT CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: After converting cgm's to tif via %UGII_BASE_DIR%\NXPLOT\cgm2tiff.exe 
                    remaining file %tmp%\input.cgm -or- %temp%\input.cgm -or- %UGII_TMP_DIR%\input.cgm will be deleted.
                    Is is needet to prevent getting mixed tif files if multible
                    conversion jobs are running in the same time on the same JobClient."
                    Enhancement implemented by code extensions

=== 28.11.2017 ============================================================================
 - Version........: 3.1442 // J.Fes
 - Categorie......: DB 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: Object data tabel extendet: 
                    Now data colume for puid are extendet from 32 to 64 nvarchars
                    This change is required because some application data ID are larger the 32 chars

=== 27.11.2017 ============================================================================
 - Version........: 3.1442 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Issue: If data of 'Native Site' are processed
                    then only 1 object to processed where contained in Job.  
                    
                    Issue is now solved by code changes

=== 21.11.2017 ============================================================================
 - Version........: 3.1438 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: Import TC Data enhanced
                    Anaylse Partfamily data enhanced
                    Improvment: 
                    PFMaster - PFMember releation are now detected via 'IMAN_UG_part_family_link'
                    This methode is better then old methode to find 
                    PFMaster - PFMembers releation find via folder 'Family Members' or 'Familienmitglieder'

=== 17.11.2017 ============================================================================
 - Version........: 3.1437 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: Ver.Info 
 - Description....: -Action "BOMCompair" -SubAction "EVALUATION"
                    During compair BOMLines evaluation of Values enhanced
                    If pre or post value is Nothing then evaluation is now evaluated as:
                     'OK' if pre=nothing and post=nothing
                     'ERR' if pre='has value' and post=nothing
                     'ERR' if pre=nothing and post='has value'

=== 14.11.2017 ============================================================================
 - Version........: 3.1437 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: It is now posible to import metadata of 'JT' and 'STEP' datsets into PLMJobManager
                    DataSetType supplemented by folowing entrys: 
                     - 'File    DS.Type             NamedRef.Type'
                     - 'JT.SP   DirectModel         JTPART'
                     - 'JT.AP   DirectModelAssembly ConfiguredAssembly'
                     - 'STEP.SP STEP                STEP'
                     - 'STEP.AP STEP                StepAssembly'

=== 09.11.2017 ============================================================================
 - Version........: 3.1436 // S.Gueth
 - Categorie......: JCT 
 - Type...........: Doc: 
 - Description....: default result codes for BOM compair:
                    BOM-101: BOM-1pre.xml exists
                    BOM-102: BOM-2post.xml exists
                    BOM-103: BOM-1pre.xml BOM-2post.xml exists
                    BOM-109: Info last mod date of BOM
                    BOM-110: BOM IR puid is consistend
                    BOM-122: BOM IR Item name is consistend
                    BOM-123: BOM IR Rev is consistend
                    BOM-124: BOM IR FromSiteId is consistend
                    BOM-111: BOM precise/imprecise is consistend
                    BOM-112: BOM-Lines count
                    BOM-113: BOM-Lines pre ref content
                    BOM-114: BOM-Lines post ref content
                    BOM-115: BOM-Lines Info about compair
                    BOM-116: BOM-Lines Sequence Number compair
                    BOM-117: BOM-Lines BOML_OcN_ptt_puid compair
                    BOM-118: BOM-Line occurrence notes report
                    BOM-118-UGN: BOM-Line BOM-Line occurrence notes UG Name report
                    BOM-119: BOM-Line ItemName report
                    BOM-120: BOM-Line ItemPuid report
                    BOM-121: BOM-Line rev report
                    BOM-125: BOM-Line qty_val compair
                    BOM-126: BOM-Line trf_rot00 compair
                    BOM-127: BOM-Line trf_rot01 compair
                    BOM-128: BOM-Line trf_rot02 compair
                    BOM-129: BOM-Line trf_rot10 compair
                    BOM-130: BOM-Line trf_rot11 compair
                    BOM-131: BOM-Line trf_rot12 compair
                    BOM-132: BOM-Line trf_rot20 compair
                    BOM-133: BOM-Line trf_rot21 compair
                    BOM-134: BOM-Line trf_rot22 compair
                    BOM-135: BOM-Line trf_per0 compair
                    BOM-136: BOM-Line trf_per1 compair
                    BOM-137: BOM-Line trf_per2 compair
                    BOM-138: BOM-Line trf_tra0 compair
                    BOM-139: BOM-Line trf_tra1 compair
                    BOM-140: BOM-Line trf_tra2 compair
                    BOM-141: BOM-Line trf_invscale compair
                    BOM-142: BOM-Line ref_designator compair
                    BOM-143: BOM-Line child_itemu compair
                    BOM-144: BOM-Line child_itemc compair
                    BOM-145: BOM-Line occurre_name compair
                    BOM-146: BOM-Line occurre_type compair
                    BOM-147: BOM-Line order_no compair

=== 09.11.2017 ============================================================================
 - Version........: 3.1436 // S.Gueth
 - Categorie......: Admin Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: Doc: 
 - Description....: option "Ignore all conditions" added in result classification rules
                    If this property is set to true, then all conditions will be ignored and the result of the given rule will be used

=== 08.11.2017 ============================================================================
 - Version........: 3.1436 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -Action "TCDataQuality_2016_09" -SubAction "TCDataQualityCheckVer1"
                    Part Family Member (PFM) references will be checked in TC Data Quality check: 
                    See point 3.6 in data quality settings 
                    Results for this check are stored  on Item Revision 
                    error code 361: Partfamily Member Item is not below 'PFMaster-Item-folder'
                    error code 362: Partfamily Master has no Partfamily 'PFMaster-Item-folder'
                    error code 363: Partfamily Master is missing Partfamily Members
                    error code 364: Partfamily Master and Members is missing 'PFMaster-Item-folder
                    error code 364: Partfamily Members is missing Partfamily Master

=== 08.11.2017 ============================================================================
 - Version........: 3.1436 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: In Objectlist process state did not displayed in all cases process status mapped value   
                    Issue is now solved by code changes

=== 17.10.2017 ============================================================================
 - Version........: 3.1433 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-5546
 - Description....: Settings for BOMCompair in CheckBox settings:
                    1. Trans.Matrix: transformation deviation absolute result rules
                    2. Trans.Matrix: rotation deviation absolute result rules
                    defines result classification rules for transformation and rotation deviation in the translation matrix

=== 09.10.2017 ============================================================================
 - Version........: 3.1433 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "GB_SAPIntegration_2017_01_03" -> SAPChkInUnlogEvaluate
                    Methode during SAPChkInUnlogEvaluate enhanced 
                    In case process step 'SAP CheckIn Unlog' returend no result 
                    then Result.Code = RFSAP-0002 and Result.Msg = ' .. [CI:ERR:NOT Processed]'

=== 09.10.2017 ============================================================================
 - Version........: 3.1433 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "GB_SAPIntegration_2017_01_03" -> RunConnector
                    Methode during RunConnector enhanced 
                    In case RunConnector returns exit code = 100 
                    then we retry to Run Connector but allover may 3 times

=== 18.09.2017 ============================================================================
 - Version........: 3.1429 // S.Gueth
 - Categorie......: Settings JCT CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added BOM data settings into CheckBox settings
                    defines in which way the BOM data should be compared

=== 13.09.2017 ============================================================================
 - Version........: 3.1428 // S.Gueth
 - Categorie......: Scripts/Params. Settings JCT 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: New: 
 - Description....: Instead of setting parameters for a cmd tools action and subaction in the job script
                    you can now define them in the JobManager at:
                     Scripts/Param. -> CMD.Tools.Process.Parameters
                    this will generate an xml file with the specified settings
                    then you only have to set the xml file name as parameter when you call the cmd tools in the script
                    Example:
                    JobManagerCMDTools.exe -SubActionSettingsXML SubActionSettingsXmlFileName.xml

=== 30.08.2017 ============================================================================
 - Version........: 3.1428 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: If during data Import/Update Status 'X.PLM.ERR' has been assigned (because an PLM issue happend) 
                    then status has been assigned to all datasets of IR.  
                    Behavior is now changed that only the Dataset with the 'PLM issue' get the status 'X.PLM.ERR'

=== 30.08.2017 ============================================================================
 - Version........: 3.1428 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Issue JobMgr did show an 'ERROR Message Box' if no 'f.Site' was selected in case of use: 
                     'Object List' 
                        |-> 'EXTRA' 
                             |-> View all datasets of NX Assembly (analyze by:[BOM structure]) 
                             |-> View in Datagrid where IRs 'is used' (analyze by:[BOM structure]) 
                             |-> List in Textbox where IRs 'is used' (analyze by:[BOM structure]) 
                             |-> Import data of Items/IRs 
                             |-> Import data of Items/IRs (incl. Assembly Components)
                     
                    Now an Information is printed into TextBox

=== 29.08.2017 ============================================================================
 - Version........: 3.1427 // S.Gueth
 - Categorie......: JCT 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: Subaction 'JobData4ResultsReadFromFile' for Action 'JobDataEdit_2012_09'
                    sets the process result from a csv file to the coresponding object in the job packet
                    example csv file:
                    #PUID#;#ResultCode#;#ResultMsg#;#ResultLnk#;#ResultMsgExtendet#;#ResultHasWRN#;#ProcessTimeStart#;#ProcessTimeEnd#
                    "B4cJeALIYonpGC";"0";"OK";"";"OK 3 IRS Renamed";"False";"30.01.2017 12:31:21";"30.01.2017 12:34:45"
                    "BwUJeALIYonpGC";"0";"OK";"";"OK A001->001";"False";"30.01.2017 12:31:21";"30.01.2017 12:34:45"
                    Date format:  dd.MM.yyyy HH:mm:ss

=== 19.08.2017 ============================================================================
 - Version........: 3.1424 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "RefileTC_2012_01" -SubAction "EVALUATE"
                    Evaluation is now using _Rf20_RefileJob_2.log for evaluation 
                      if _Rf20_RefileJob.log is incomplead 
                    Background:  
                      When refile process failes then _Rf20_RefileJob.log is incomplead
                      please use .\10-JobScripts\RefileNX11\ClientScripts\RfExecute.cmd 
                      Version: 19.08.2017

=== 19.08.2017 ============================================================================
 - Version........: 3.1424 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Application behavior canged
                    In 'Obect List' n.Obj was automaticly set
                    if an file has been used as the soure to find objects.
                    New behavior is now that n.Obj is not anymore changed if an file is used.

=== 15.08.2017 ============================================================================
 - Version........: 3.1420 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: If Syslog Text Box is was emptied then 
                    also a new Logfile is generated.
                    Hint: all previous logfiles will be keeped.

=== 14.08.2017 ============================================================================
 - Version........: 3.1420 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Context menue extended with new entry 
                    'copy ItemID to clipboard Shift Strg + C'
                    this new function allows you to copy parsed ItemId

=== 10.08.2017 ============================================================================
 - Version........: 3.1419 // S.Gueth
 - Categorie......: Scripts/Params. Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-5433
 - Description....: added BOM compair to refile process
                    set parameter JobMgr_BOMCompair in refile script to ON

=== 07.08.2017 ============================================================================
 - Version........: 3.1419 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "RefileTc_2012_01" -SubAction=EVALUATE" 
                    has a additional Paramter -UpdateImanFileProps_EXE_DPNE "%JobRoot_DP%\..\BinL\UpdateImanFileProps.exe"
                    if this option has a value and points to Program UpdateImanFileProps.exe
                    then Process UpdateImanFileProps will be executed. 
                    To trigger the action please add to RfCustomSetEnv.cmd 
                    set JobMgr_RfExtEvalROpt=-UpdateImanFileProps_EXE_DPNE "%JobRoot_DP%\..\BinL\UpdateImanFileProps.exe"
                    
                    if you want to use additional settings then use option:
                     -UpdateImanFileProps_Options -config=''%JobRoot_DP%\..\BinL\UpdateImanFileProps_config.txt''

=== 07.08.2017 ============================================================================
 - Version........: 3.1419 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "RefileTc_2012_01" -SubAction=EVALUATE" 
                    has a additional Paramter -UpdateImanFileProps_EXE_DPNE "%JobRoot_DP%\..\BinL\UpdateImanFileProps.exe"
                    if this option has a value and points to Program UpdateImanFileProps.exe
                    then Process UpdateImanFileProps will be executed. 
                    To trigger the action please add to RfCustomSetEnv.cmd 
                    set JobMgr_RfExtEvalROpt=-UpdateImanFileProps_EXE_DPNE "%JobRoot_DP%\..\BinL\UpdateImanFileProps.exe"
                    
                    if you want to use additional settings then use option:
                     -UpdateImanFileProps_Options -config=''%JobRoot_DP%\..\BinL\UpdateImanFileProps_config.txt''

=== 04.08.2017 ============================================================================
 - Version........: 3.1416 // S.Gueth
 - Categorie......: GUI TaskScheduler Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: Clean Up of JobManager data, process data and CheckBox data is now available
                    1. via JobManager gui: 'Extra' -> 'JobServer / CheckBox data clean up...'
                    2. via Task Sheduler.: 'JobServerCheckBoxCleanUp.vb'
                    
                    JSSyslog CleanUp.....: defines if the JobServer syslog files should be cleaned up 
                                           -> all files older Then 30 days will be deleted
                    ProcessData CleanUp..: defines if ProcessData Zip/7z files should be cleaned up 
                                           -> all files, that have no refference In JM database will be deleted
                    CBData CleanUp.......: defines if the CheckBox data in the given CheckBox data root dir should be cleaned up
                      
                                           Clean up by CB xml file:
                                           the process is looking for all xml files that are not refferenced in JM database (as result link) within the specified site id's
                                           if there is no refference, the process is also looking for corresponding cgm, tif and syslog files 
                                           -> all these files will be deleted
                      
                                           Clean up by Item Revision Object:
                                           the process is looking for folders that contains cb xml files
                                           the item revision object will be identified by the folder structure
                                           -> example C:\CBData\Root\ ... \ItemID\Rev\CBExtract.xml
                                           if this object does not exist in the JobManager db within the specified site id's
                                           -> the whole folder (where the xml file is located) within subfolders will be deleted

=== 06.07.2017 ============================================================================
 - Version........: 3.1413 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: PLM Structure Error default value changed from:'X.TC.Struc.ERR' to 'X.PLM.ERR' 
                    During updating Object Data process status will be set from 'X.PLM.ERR' to 'N'
                    If value for colume 'O.Imp.Msg WRN/ERR' do not contains text 'ERR' anymore.

=== 06.07.2017 ============================================================================
 - Version........: 3.1412 // A.Becker
 - Categorie......: ProcessGroups 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: When a process state name contains an asterix (*) or a questionmark (?)
                    this procState will be automatically declared as QueryOnly
                    And will not be displayed within the ProcessState editor window.

=== 20.06.2017 ============================================================================
 - Version........: 3.1412 // J.Fes
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: BOMCompair Options enhanced option: 
                    -BOMCompairForProcess 
                     valid values are: P1_TcSiteCons (Default) // P2_CMM

=== 19.05.2017 ============================================================================
 - Version........: 3.1406 // J.Fes
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: BOMCompair Options enhanced with 2 more options 
                    -BOMCompairDoCompairOCN with option:
                       ON  = sets to compair OCN (Default)
                       OFF = sets to disable compair OCN
                    -BOMCompair BOMRef Find Methode with option:
                       M1_byBOMPuid = sets to find ref BOMLines via BOMPuid  
                       M2_byBOMData = sets to find ref BOMLines via BOMData ir_puid and pseq + order number 
                       M3_byAutomation = sets to find first like 'M1_byBOMPuid' if not found then via 'M2_byBOMData' (Default)

=== 27.04.2017 ============================================================================
 - Version........: 3.1403 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: CheckBox settings enhanced 
                    It is now possible to define 'File Name Scheme' for CheckBox Filename conventions

=== 25.04.2017 ============================================================================
 - Version........: 3.1401 // J.Fes
 - Categorie......: Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Description....: It is now posible to use oracle optimicer hints in JobMgr .sql  
                    See settings Site/Data Import->
                    Start Dialog Edit Site def. --> Import Settings 3
                     4 - Import eXtendet
                         4 - use Oracle optimizer hint' '/*+ parallel (n) */'
                         5 - use additional Oracle optimizer hints
                             #Doc: see https://docs.oracle.com/cd/B10500_01/server.920/a96533/hintsref.htm

=== 17.04.2017 ============================================================================
 - Version........: 3.1400 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Description....: It is now posible for TC Sites to list or view Ir's where used in BOMS
                    see Object List -> Extra -> View where IRs 'is used' (analyze by:[BOM structure])  
                    see Object List -> Extra -> List where IRs 'is used' (analyze by:[BOM structure])

=== 14.04.2017 ============================================================================
 - Version........: 3.1400 // J.Fes
 - Categorie......: Import Sites/Data Import JobControl Settings 
 - Description....: Passwords are encrypted stored in JobMgr database.
                    JobServer sends password also encrypted to JobClient
                    If you now insert a password into JobMgr then it is required 
                    to enter the full password form the beginning. 
                     - PLEASE Note: A before stored password cannot be edit because it is already encripted: --!!.
                       !! - Value of an before stored password cannot be edit - !! 
                       !! - because if value is already                       - !!.

=== 13.04.2017 ============================================================================
 - Version........: 3.1318 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: Doc: 
 - Description....: JobComputer settings removed unused Data columes 
                    - [OsUser]  - [OSPassword] - [OSDestrib_DP]

=== 13.04.2017 ============================================================================
 - Version........: 3.1318 // J.Fes
 - Categorie......: ObjectJobResults Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: Now it is posible to customice JobComputers header text 
                    vor columes x.Custom01 .. x.Custom04

=== 10.04.2017 ============================================================================
 - Version........: 3.1318 // J.Fes
 - Categorie......: Install and Setup 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobSever SQL DB connection supports now
                    windows user authentication mode

=== 05.04.2017 ============================================================================
 - Version........: 3.1313 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: During Import TC.Data to JobMgr 
                     - data of: 'IContr:Ir.ModDateBegin' and - 'IContr:Ir.ReleaseDateBegin'
                    are in some cases not correct set/updated. 
                    Issue is now solved by code changes

=== 24.03.2017 ============================================================================
 - Version........: 3.1309 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: added MigrationReportEval_cls class for CMM eval process
                    to get status value from cmm MigrationReport xml file
                    value is parsed from: Migration > Session > Report > Status > OperationStatus
                    if status is 'failure' --> res code RPTS-01 will be set

=== 24.03.2017 ============================================================================
 - Version........: 3.1309 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -Action "CMM2NX_2021_06" -SubAction "CMM_ResultEval"
                    New parameter CMM_REPORT_DIR and CMM_REPORT_TARGET_DIR added
                    CMM_REPORT_DIR.......: path to the directory where the cmm reports
                                           will be sored into generated with CMM Process
                    CMM_REPORT_TARGET_DIR:path to the root directory where the cmm reports will be stored 
                                          during CMM Process evalueation with JobMgrCmdTools

=== 24.03.2017 ============================================================================
 - Version........: 3.1309 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: -Action "MigIdeas2NX_2013_10" -SubAction "CMM_ResultEval"
                    New parameter CMM_REPORT_DIR and CMM_REPORT_TARGET_DIR added
                    CMM_REPORT_DIR.......: path to the directory where the cmm reports
                                           will be sored into generated with CMM Process
                    CMM_REPORT_TARGET_DIR:path to the root directory where the cmm reports will be stored 
                                          during CMM Process evalueation with JobMgrCmdTools

=== 24.03.2017 ============================================================================
 - Version........: 3.1309 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: added MigrationReportEval_cls class for CMM eval process
                    to get status value from cmm MigrationReport xml file
                    value is parsed from: Migration > Session > Report > Status > OperationStatus
                    if status is 'failure' --> res code RPTS-01 will be set

=== 23.03.2017 ============================================================================
 - Version........: 3.1310 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: MigIdeas2NX_2013_10.CMM_ResultEval.CMMProcessesStop extended
                    new options avilable
                     -StopProcessesTCServer 
                     -StopProcessesCMM 
                    #Doc: If Parameter is set then stop of processes will be done
                    #Doc: Default is not to stop the processes
                    
                    also XCADServices will be stopped

=== 23.03.2017 ============================================================================
 - Version........: 3.1308 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: CheckBox Compare for PH.PatternArchiving and PH.PatternShading added
                    you can change the setting 'PH.is Pattern do check' in the CheckBox Settings
                    to define if the check should be executed or not
                    !Attention!:check will only be executed when pattern data is available on both CB extracts

=== 23.03.2017 ============================================================================
 - Version........: 3.1310 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: MigIdeas2NX_2013_10.CMM_ResultEval.CMMProcessesStop extended
                    new options avilable
                     -StopProcessesTCServer 
                     -StopProcessesCMM 
                    #Doc: If Parameter is set then stop of processes will be done
                    #Doc: Default is not to stop the processes
                    
                    also XCADServices will be stopped

=== 21.03.2017 ============================================================================
 - Version........: 3.1308 // S.Gueth
 - Categorie......: Admin Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: Environment variable 'JobMgr_WIMode' will be set in JobClient before executeing a job
                    possible values: [NotSpecified|Normal|Minimized|Hidden]

=== 21.03.2017 ============================================================================
 - Version........: 3.1308 // S.Gueth
 - Categorie......: GUI 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-5118
 - Description....: key 'Spacebar' in JobClient
                    Switches JobClient to previous job client mode, when client is currently in pause mode

=== 16.03.2017 ============================================================================
 - Version........: 3.1308 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added CheckBox compare in drawing data for pattern parts
                    this check is enabled by default and can be disabled by changing the 'DR.Pattern Condition:Do Compare' setting in the CheckBox Settings

=== 16.03.2017 ============================================================================
 - Version........: 3.1308 // S.Gueth
 - Categorie......: CheckBox 
 - Type...........: New: 
 - Description....: New Check added if current dataset is a pattern part or not
                    this information is added to P.Res.Msg.Ext.Data 
                    #Example: [PH:isPatternPart:ON|OFF]

=== 15.03.2017 ============================================================================
 - Version........: 3.1308 // S.Gueth
 - Categorie......: Admin 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: changed whats new excel file from .xls to .xlsx

=== 10.03.2017 ============================================================================
 - Version........: 3.1307 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: Subaction 'AttributeSync' in Action 'CustomCmdTools_2016_04'
                    Process to sync specific NX dataset attributes to tc ir object

=== 09.03.2017 ============================================================================
 - Version........: 3.1308 // J.Fes
 - Categorie......: Admin 
 - Additional Info: Ver.Info 
 - Type...........: New: 

=== 20.02.2017 ============================================================================
 - Version........: 3.1302 // S.Gueth
 - Categorie......: CommandLineArgs JCT 
 - Type...........: New: 
 - Description....: parameter 'StepExportViaUGExport' in Action 'NxDataProcessing_2013_09', Subaction 'StepExport'
                    if set, step export will be executed via ug_export (not via teamcenter)

=== 20.02.2017 ============================================================================
 - Version........: 3.1303 // J.Fes
 - Categorie......: Install and Setup 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobMgr SQL scripts is now unsing SQLcmd.exe methodes.
                    Usage of SQLcmd.exe replaces usage of OSQL.exe

=== 20.02.2017 ============================================================================
 - Version........: 3.1303 // J.Fes
 - Categorie......: Install and Setup 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobMgr check's now if SQLcmd.exe  is installed on Computer
                    If SQLcmd.exe  is not installed on computer a error messagebox will be shown.

=== 08.02.2017 ============================================================================
 - Version........: 3.1299 // J.Fes
 - Categorie......: Scripts/Params. 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobScripts methodes redesigned.  
                    If the JobData as text files need to be add to the JobPacket  
                    then please add to job main script: 
                     - for ObjectsList..........:  set JobAddFile_ObjectsList_txt=true
                     - for ObjectsListAllDetails:  set JobAddFile_ObjectsListAllDetails_txt=true

=== 07.02.2017 ============================================================================
 - Version........: 3.1299 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobServer and JobClient stopt processing if temp dir was cleand during running application.
                    Issue is now solved by code changes.

=== 07.02.2017 ============================================================================
 - Version........: 3.1299 // J.Fes
 - Categorie......: ObjectList 
 - Description....: ObjectData selection enhanced
                    Now it is possible to set object selection based on displayed data in data grid.
                    
                    This selection Methode is now avilabel for folowing data columes:
                     - O.Name
                     - Register P.Data
                       - Packet.N
                       - On.Comp.
                       - Res.Code
                       - Res.Msg
                       - Res.MsgE (eXtendet)

=== 20.01.2017 ============================================================================
 - Version........: 3.1293 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: TC.Data import dataset version count was disabled in case
                     folowing setting was disabled:
                     Sites/Data Import 
                       |-> Import Setting 1 -> Import Data Conditions -> Import DS Full File Names 
                           |-> Import Data Conditions -> Import DS Full File Names 
                               |-> Import Data Conditions 
                                   |-> Import DS Full File Names = false (disabled) 
                     
                    This behavior is a illogical behavior.
                    
                    Now JobMgr Dataset version generation is now only depeding on setting:
                      Sites/Data Import -> Import Settings 3 -> 4 - Import eXtendet -> 3 - DataSet Version count Enable/Disable
                        |-> Import Settings 3 
                            |-> 4 - Import eXtendet
                                |-> 3 - DataSet Version count Enable/Disable
                    
                    Issue is now solved by code changes

=== 19.01.2017 ============================================================================
 - Version........: 3.1290 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: JobProcessing enhanced. It is now posible to import JobResults results
                    via identifing the Data by @ObjectFromSiteID, @ObjectClass, @ObjectName
                    Please note this funtion may be only used in database containing unic names by @ObjectFromSiteID, @ObjectClass, @ObjectName
                    
                    In programming JobMgr.CMD tools please use: 
                     ObjectData_cls.ObjectSpecialEditRuleSet = ObjectSpecialEditRule_enum.ObjectfindBy_FromSiteClassObjectName

=== 03.01.2017 ============================================================================
 - Version........: 3.1285 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: New NX10 refile parameter -set_new_dataset_owner
                    is now avilable via refile parameter editor

=== 01.01.2017 ============================================================================
 - Version........: 3.1284 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "AppUid_2012_02" -ParseAppUidResultsFile 
                    Evaluation of results is now matching the processed datasets
                    Evaluation of process returns for a processed Dataset P.Res.msg = "AppUid:OK:Upgraded"  
                    Evaluation of process returns for a all other Object P.Res.msg = "AppUid:OK"

=== 22.12.2016 ============================================================================
 - Version........: 3.1283 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-4027
 - Description....: Import TC.Data via Item-List printed always all found IR's after each anayse of Item.
                    This Issue did leads to a long import process time, if many Items was in the Item-List.
                    Issue is solved by code changes

=== 21.12.2016 ============================================================================
 - Version........: 3.1282 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Issue..........: JobMgr.Issue-4028
 - Description....: During Process Sites/Data -> Import 10 - Sync.Site [Items Only] an Exception did happend. 
                    This Software Issue lead to unwanted deletion of Data in JM.DB.
                    Issue is solved by code changes
                    
                    Improvment: Software stops now Sync.Site processing 
                    if reading data from TC.DB or JM.DB lead to an Exception or Error

=== 21.12.2016 ============================================================================
 - Version........: 3.1282 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: TC Site/Data Import/Update did not updatet data in all cases. 
                    Issue is now solved by code changes

=== 14.12.2016 ============================================================================
 - Version........: 3.1297 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Enhanced setting for import multisite data
                    It is now posible to eXlude for Objects the add of 'SiteId'
                    to 'Exported Site List' via ExportRecorde.ExportReason
                    
                    see: Sites/Data Import 
                           |-> Import Settings 3 
                                |-> 3 - Import Multisite settings eXtende 
                                    |->  2 - Export Recorde eXclude via Export Reason

=== 12.12.2016 ============================================================================
 - Version........: 3.1296 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction ChangeOwner_ResultEval  
                    add for CMM processing 
                    It do check result's of process: ChangeOwner
                    Check condition OK: Dataset.Owner is not like any value of -ChangeOwner_FinalNotToLike 
                    Check condition ERR: Dataset.Owner is like any value of -ChangeOwner_FinalNotToLike

=== 12.12.2016 ============================================================================
 - Version........: 3.1296 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction ChangeOwner_ResultEval  
                    add for CMM processing 
                    It do check result's of process: ChangeOwner
                    Check condition OK: Dataset.Owner is not like any value of -ChangeOwner_FinalNotToLike 
                    Check condition ERR: Dataset.Owner is like any value of -ChangeOwner_FinalNotToLike

=== 07.12.2016 ============================================================================
 - Version........: 3.1293 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: It is now posible to refresh JM.DB Data that has O.Need.Upd flag
                    
                    This new function can be used
                    
                    Interactiv:
                    -----------
                    Sites/Data Import -> Import.Site.Data 
                      |-> during this sync process it is first used all other import actions follows
                    Sites/Data Import -> Sync.Site.Data-> 40 - Sync.Site [Data with O.Need.Upd>0] 
                      |-> Only Data with O.Need.Upd>0 will be refereshed 
                    
                    Tasksheduler:
                    -------------
                    Script: S:DataImport_Tc_DataSetsAndIrs.vb Parameter: /SiteList=HIL_QS /Methode=Sync_NeedUpdateAndEnd
                      |-> Only Data with O.Need.Upd>0 will be refereshed

=== 07.12.2016 ============================================================================
 - Version........: 3.1291 // S.Gueth
 - Categorie......: Admin Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: Doc: 
 - Issue..........: JobMgr.Issue-110
 - Description....: das ist neu
                    #Doc: test1
                    #Doc: test2

=== 06.12.2016 ============================================================================
 - Version........: 3.1289 // S.Gueth
 - Categorie......: Import Sites/Data Import TaskScheduler Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added "Clients to execute check" option to "Site Groups definition"
                    this option defines the clients that are allowed to execute the multisite check (wildcards like * can be used)
                    this option is valid for TC Multisite Check via 'TaskScheduler' or 'Sites/Data Import' tab

=== 06.12.2016 ============================================================================
 - Version........: 3.1289 // S.Gueth
 - Categorie......: GUI Import Sites/Data Import Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: New button 'TC Multisite Check' in 'Sites/Data Import' tab
                    execute TC Multisite Check directly for a specific site
                    all objects with state N,M or A that are in the Site Group def of the selected site will be processed

=== 06.12.2016 ============================================================================
 - Version........: 3.1291 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Sync.Site.Data new Sync Methodes avilable 
                    Sync.Site.Data has now 4 Options to Sync Data between JM.DB and TC.DB
                    - 10 - Sync.Site [Items Only] 
                    - 20 - Sync.Site [Ir Only]
                    - 21 - Sync.Site [Ir + Import.Site.Data]  #New:06.12.2016
                    - 30 - Sync.Site [Items/Ir + Import.Site.Data] (Default)
                    - 40 - Sync.Site [Data with O.Need.Upd>0] #New:06.12.2016

=== 28.11.2016 ============================================================================
 - Version........: 3.1288 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: If dataset has a PLM Structure Error then all Datasets of IR will be set 
                    for Processgroups P01..P20+PRf to status='X.PLM.ERR' if there status was before = 'N' 
                    Application Change is done in T-SQL Script: 
                     .\01-BinServer\Resources\JobMgrSQL\JobMgr_30_ApplProceduresObjects_Import_DataSets_and_IRs.sql

=== 24.11.2016 ============================================================================
 - Version........: 3.1286 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: New Replacment #Var avialble for
                    #40-JobServerScripts_DP#     -> Location for JobServer.net Scripts
                    #40-JobServerScriptsL_DP#    -> Location for JobServer.net Local on JobServer

=== 24.11.2016 ============================================================================
 - Version........: 3.1287 // J.Fes
 - Categorie......: ProcessGroups 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: In some cases ProcessGroup settings was not saved during Edit Process Status   
                    Issue is solved by code changes.

=== 24.11.2016 ============================================================================
 - Version........: 3.1287 // J.Fes
 - Categorie......: JobControl ProcessGroups 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: It is now posible to move ProcessGroups 01..40 up and down. 
                    Info: JobControlRules ProcessGroups are also moving.
                    Important current version do not moves existing Process Results n JobMgr.DB

=== 16.11.2016 ============================================================================
 - Version........: 3.1283 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: You can now define that a Job 
                    Add 'Site Definition' of JobComuters default SiteDef
                    see Tab: Job Control 
                        -> Edit JobContol Rule 
                           |-> Job Definition Extended 
                               |-> 2 Sites 
                                   |-> Add 'Site Definition' of JobComuters default SiteDef

=== 15.11.2016 ============================================================================
 - Version........: 3.1281 // S.Gueth
 - Categorie......: CommandLineArgs JCT 
 - Type...........: New: 
 - Description....: Parameter 'ObjectPUIDs' for subaction 'EditObjects' in action 'JobDataEdit_2012_09'
                    Semicolon separated list of Object PUIDs
                    only objects with the given puids will be edited

=== 26.10.2016 ============================================================================
 - Version........: 3.1278 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Enhanced settings for enable disable count of datasets 
                    Please see site settings: 
                    Sites/Data Import -> Import Settings 3 -> 4 - Import eXtendet -> '4.03 - DataSet Version count Enable/Disable'

=== 14.10.2016 ============================================================================
 - Version........: 3.1276 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: On Importing manuel (via Extras->Import data of Item / IR) 
                    Process Optimiced
                      See settings in: 
                       Sites/Data Import -> Import Settings 3 -> 4 - Import eXtendet -> Import by list:force Import/Update

=== 14.10.2016 ============================================================================
 - Version........: 3.1276 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: On Importing manuel (via Extras->Import data of Item / IR) 
                    Process Optimiced
                      See settings in: 
                      Sites/Data Import -> Import Settings 3 -> 4 - Import eXtendet -> Import by list:force Import/Update

=== 13.10.2016 ============================================================================
 - Version........: 3.1276 // J.Fes
 - Categorie......: Scripting 
 - Description....: TeamCenterMultiSiteCheck via Tasksheduler - Script is processing all data 
                    having status 'N' 'M' or 'U'

=== 13.10.2016 ============================================================================
 - Version........: 3.1276 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Enhanced settings for define how import behavior is during Import by list  
                    Please see site settings: 
                    Sites/Data Import -> Import Settings 3 -> 4 - Import eXtendet -> '4.02 - Import by list:force Import/Update'

=== 13.10.2016 ============================================================================
 - Version........: 3.1276 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Enhanced settings for define if Import.Site.Data is active/avilable  
                    Please see site settings: 
                    Sites/Data Import -> Import Settings 3 -> 4 - Import eXtendet -> '4.01 - defines if Import.Site.Data is active'

=== 21.09.2016 ============================================================================
 - Version........: 3.1271 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: New Option avilable for setup how MultiSite data are handelt.
                    
                    see:Sites/Data Register: 'Import Settings 3' 
                                              -> 3 - Import Multisite settings eXtendet 
                                               -> Multisite Import pSiteId behavior
                    
                    With this Option you can now define if you want to insert TC.Multisite pSiteId data
                    If Site is not regestiert in JobManager Sites/Data

=== 16.09.2016 ============================================================================
 - Version........: 3.1269 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: If for NX Part no NX.sylog section is found then 
                    then JobLink is set to NX.syslog of Job

=== 16.09.2016 ============================================================================
 - Version........: 3.1270 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: In case that a Demandload action during refile was prossesed then  
                    NX.syslog parser did not found the right syslog section for part.
                    Issue is solved by code changes in JCT

=== 24.08.2016 ============================================================================
 - Version........: 3.1260 // J.Fes
 - Categorie......: Import 
 - Type...........: Change: 
 - Description....: BOM selfref analyse returns now 
                    Item.ID of BOM where Start ITEM.ID is fond in lower structure

=== 24.08.2016 ============================================================================
 - Version........: 3.1260 // J.Fes
 - Categorie......: Import 
 - Type...........: Change: 
 - Description....: BOM selfref analyse returns now 
                    Item.ID of BOM where Start ITEM.ID is fond in lower structure

=== 19.08.2016 ============================================================================
 - Version........: 3.1258 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Enhanced settings for enable debugging during Import process 
                    Please see site settings: 
                    Sites/Data Import -> Import Settings 3 -> 4 - Import eXtendet -> '4.17 - Debug during import'

=== 19.08.2016 ============================================================================
 - Version........: 3.1258 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobServer Enhanced setting for import multisite data 
                    
                    see: Sites/Data Import 
                           |-> Import Settings 3 
                                |-> 3 - Import Multisite settings eXtende 
                                    |->  1 - Multisite Import pSiteId behavior

=== 15.08.2016 ============================================================================
 - Version........: 3.1256 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Result classification methode extendet to parse results from Datalines via  
                    Now you are able to define 'left keyword' and 'right keyword' to parse result from DataLine.
                    
                    #Example:
                    Text Line........: CSYS_Refile: 4711/A2/Energy regulator: Object names already exist:DATUM_CSYS_0_PLANE_XY,DATUM_CSYS_0_PLANE_YZ
                    Result parse def.: #Txt.ParseLeft#=#regulator: #,#Txt.ParseRight#=#:#
                    Result is final..: Object names already exist 
                    
                    #Hint:
                    If Only Txt.ParseLeft is defined then Result is parsed from left keyword until end of text Line. 
                    If Txt.ParseRight do not match in Text Line then Result is parsed from left keyword until end of text Line.

=== 05.07.2016 ============================================================================
 - Version........: 3.1251 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Now ist is posible to include script or resource files into your JobScript
                    
                    #Example: 
                     add to your JobStartScript folowing line definition:
                      set JobMgr_10-JobScriptsInc_01=_CustomDefaults\TcPrompt_Custom
                      set JobMgr_10-JobScriptsInc_02=_CustomDefaults\TcTool_Custom
                     
                    then all Script files in: 
                     ..\10-JobScripts\_CustomDefaults\TcPrompt_Custom  
                     ..\10-JobScripts\_CustomDefaults\TcTool_Custom
                     will be added into root dir of JobFiles

=== 04.07.2016 ============================================================================
 - Version........: 3.1248 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: During Importing JobResults with multible JobServers import stoped with message 
                    The process cannot access the file because it is being used by another process.
                    To solve the issue we handel for each JobServer one own directory 90-JobTempImportExecute\#ComputerName#_P#TcPeerPort#
                    Issue is solved by code changes

=== 04.07.2016 ============================================================================
 - Version........: 3.1247 // S.Gueth
 - Categorie......: Import Sites/Data Import TaskScheduler Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: added "Sites to check" option to "Site Groups definition"
                    this option defines the sites on which items will be checked
                    Example:
                    Members in site group: Site1, Site2, Site3
                    Sites to check.......: Site1, Site3
                    --> only objects of site1 and site3 will be checked with TC-multisite check

=== 30.06.2016 ============================================================================
 - Version........: 3.1248 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Check.Settings 
 - Type...........: Doc: 
 - Description....: JobPacket contains now TcPrompt_Custom.cmd file 
                    if exist in ..\10-JobScripts\TcPrompt_Custom.cmd
                    This file can be used to orgenice teamcenter prompt for all Jobs

=== 27.06.2016 ============================================================================
 - Version........: 3.1247 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: CheckBox Assembly Check enhanced it compairs
                    Now it compairs also Handel and Inst.Handel
                    CheckBox returns waring if Handel or Inst.Handel do not match

=== 17.06.2016 ============================================================================
 - Version........: 3.1245 // J.Fes
 - Categorie......: Admin ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: Doc: 
 - Description....: Removed Unused Data and settings  
                    SelectByMarker condition Function is replaced by 
                    Group selection methode

=== 14.06.2016 ============================================================================
 - Version........: 3.1243 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: New Paramater for SubAction: DataShare in Action: TCMultiSite_2012_02_02
                    -IgnoreMissingObjectsOnSourceSite
                    if this option is set, then missing objects that exist on target site, but not on source site will be ignored

=== 07.06.2016 ============================================================================
 - Version........: 3.1240 // J.Fes
 - Categorie......: Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2654

=== 31.05.2016 ============================================================================
 - Version........: 3.1237 // J.Fes
 - Categorie......: Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Description....: It is now posible to define witch dataset types will be imported 
                    into JobMgr.DB.
                    See settings Site/Data Import->
                    Start Dialog Edit Site def. --> Import Settings 3
                    then define witch Dataset Types are to import in to JobMgr.DB
                    Avilable settings are:
                     -NX
                     -Ideas
                     -Catia
                     -ProE
                    
                    By default only NX Dataset types are switched on 
                    to enable DS.Types please set value to 'true'

=== 04.05.2016 ============================================================================
 - Version........: 3.1235 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2583
 - Description....: JobControlRules extendet:
                    It is now possible to control JobPacket containment based on
                    values of ObjectData in Colume: O.AP.CompN.Unique
                    
                    Avilable conditions are:
                     - count of Assembly Object ComponentsN Unique
                       see setting: JobControlRule 'O.Max.Comp.Unique'
                    
                     - sum of Assembly Object ComponentsN Uniqee
                       see setting: JobControlRule 'J.MaxSum.CompN.Unique'

=== 29.04.2016 ============================================================================
 - Version........: 3.1234 // J.Fes
 - Categorie......: Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2691
 - Description....: TC Data Import enhanced.
                    JobMgr.TC Data Import support's now also to Import/Update JobMgr Database 
                    This Import Methode uses the folowing rules: 
                     - Updates existing JobMgr.DB data only if Ir.ReleaseDate or Ir.ReleaseState has been changed.
                     - adds 'NEW' Data to JobMgr.DB also if Data are not released
                     - Do NOT Updates existing JobMgr.DB data if Ir.LastModifyDate or ReleaseState has been changed.

=== 26.04.2016 ============================================================================
 - Version........: 3.1234 // J.Fes
 - Categorie......: Scripting 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-2722
 - Description....: JobServer 'Scripting engine' supports now 
                    usage of external .dll's and resources
                    
                    to use it you need to define your JobServer custom script 
                    via JS: Task Scheduler -> Script -> C:SubDir\ScriptName.vb
                    
                    #Example: 
                    define in JS: Task Scheduler -> Script -> C:CustomDll_Example\CustomDll_Example.vb
                    
                    Click on Button Edit Script: 
                    It will create the directory:
                     -> ..\90-DATA\#CustomerNameShort#_SettingsGlobal\40-JobServerScripts\CustomDll_Example
                    It will create in the directory the new Script:
                     -> CustomDll_Example.vb
                     
                    Put all .dll's and resources into this directory 
                    Example: CustomDll_Example.dll  , CustomDll_Example.pdb, CustomDll_Example.xml
                    
                    Add References to your your JS.script after section Imports
                    Imports ..  
                    'References CustomDll_Example.dll
                    
                    With this Methode you can integrate external .dll in Jobserver TaskSheduler processes.

=== 25.04.2016 ============================================================================
 - Version........: 3.12342 // A.Becker
 - Categorie......: Scripting 
 - Type...........: New: 
 - Description....: Scripts can now reference external libraries without the need to copy the dll files into the application directory.
                    It is required to create an individual subfolder for scripts with external assembly references.
                    All referenced assemblies including their own dependencies have to be stored to the directory of the script.

=== 15.04.2016 ============================================================================
 - Version........: 3.1234 // S.Gueth
 - Categorie......: TaskScheduler ObjectList Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2625
 - Description....: TeamCenter Multisite Consistent Check (TC.MSC) can now be triggered directly from JobManager
                    1. via Objects List -> Extra -> TC MultiSite Check
                    2. via Task Scheduler -> Skript: MultiSiteCheck_Tc.vb
                    Attention: Site Groups have to be defined in Sites/Data Import -> Admin -> 2 - Edit 'MultiSite-Groups' settings
                    Results:
                    MSC.00.OK  : Objects are in sync
                    MSC.10.ERR : More then one OwningSite Object exist (Duplicated Items)
                    MSC.11.ERR : No OwningSite Object exist
                    MSC.12.ERR : Item with same ItemId and different puid
                    MSC.13.ERR : Items have different Item types
                    MSC.14.ERR : OwningSite-Item has no export record, but Items with same ItemId exist
                    MSC.15.ERR : There is not only exactly one item for each export record
                    MSC.16.ERR : The release statuses of items are different 
                    MSC.18.ERR : Item with same puid and different ItemId exist
                    MSC.21.ERR : IRs on remote site are different then on OwningSite
                    MSC.22.ERR : Release status of item revisions are differnet
                    MSC.31.ERR : Datasets on remote site are different then on OwningSite
                    MSC.32.ERR : Release status of datasets are different

=== 13.04.2016 ============================================================================
 - Version........: 3.1233 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Datamodel extendet JobManger Analyses now for 'NP' = NoPart Objects also BOM Data
                    Part Type extendet with Name 'NPwB' NoPart with BOM

=== 12.04.2016 ============================================================================
 - Version........: 3.1233 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Open NX - Part did not worked for TC - NX.Part
                    Issue is solved by code changes.

=== 01.04.2016 ============================================================================
 - Version........: 3.1233 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Enhancmend FlipTheSwitch is now evaluating FlipTheSwitch Report

=== 29.03.2016 ============================================================================
 - Version........: 3.1233 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-2688
 - Description....: JobRule Condition: 'J.valid on Site' was not correct evaluated.
                    Now a JobRule will be only used if JobClient Name and J.valid on Site matches exactly. 
                    Issue is solved by code changes.

=== 23.03.2016 ============================================================================
 - Version........: 3.1233 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobClientTools extendet with -Action "RefileNative_2016_02" -SubAction "PartByPart"
                    With this Methode it is possible to refile 'Native NXParts' with in the JobManager

=== 04.03.2016 ============================================================================
 - Version........: 3.1232 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Count Only in 'Object List' implementet
                    In some cases you want only the the amount of objects 
                    without displaying the data in the Data grid.
                    For his we implemented the folowing methode
                    
                    Usage:
                    ------
                     Hold shift key down during clicking on 'Search & List' Button
                     then JobServer counts only the object but do not list them in the datagrid.

=== 02.03.2016 ============================================================================
 - Version........: 3.1232 // J.Fes
 - Categorie......: ProcessGroups 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: New ProcessGroup ProcessGroupMc is now avialable.
                    ProcessGroupMc is a special Process Group to use for TC-MultiSite Check's

=== 02.03.2016 ============================================================================
 - Version........: 3.1232 // J.Fes
 - Categorie......: CommandLineArgs 
 - Additional Info: Ver.Info 
 - Description....: Usage JobServer /AutoStart Commanline args:
                     /AutoStart JobControl:A                   Start JobManager with active JobService  
                     /AutoStart TaskScheduler:On               Start JobManager with active TaskSheduler  
                     /AutoStart JobControl:A-TaskScheduler:On  Start JobManager with active JobService and TaskSheduler

=== 28.02.2016 ============================================================================
 - Version........: 3.1232 // J.Fes
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: SubAction "PLMxml_Export" in Action "TcPLMxml_Export_2016_02"
                    Method to export 'TC-PLM.xml' files from teamcenter via Tool: PLMxml_Export.exe

=== 24.02.2016 ============================================================================
 - Version........: 3.1231 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Refile parameter editor supports now -debug=yes!no option.

=== 16.02.2016 ============================================================================
 - Version........: 3.1231 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Open NX
                    Supports now also open native parts

=== 08.02.2016 ============================================================================
 - Version........: 3.1231 // S.Gueth
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: Item name and ItenRevison name was added to the I IR BOM DS exctract and compare process for DataShare / DataSync evaluation

=== 04.02.2016 ============================================================================
 - Version........: 3.1231 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Editor to set Process Status of Objects are extendet
                    
                    Now it is posible to set Status of all Dataset includet in Item-Revisions of BOM's
                    see new Option: 'inc.AP-BOM Component'
                    
                    Now it is posible to set Status of all Dataset includet in Items of BOM's 
                    see new Option: 'inc. Data of Item'
                    to use this Option you need to use 'inc.AP-BOM Component' and 'inc. Data of Item'
                    
                    By default ProcessStatus values starting with 'X*' is more protected
                    to force change the status in this cases use new Option 'edit e'X'cludes'
                    see new Option: 'edit e'X'cludes'

=== 22.01.2016 ============================================================================
 - Version........: 3.1230 // S.Gueth
 - Categorie......: Settings 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-2539
 - Description....: added "Import Licence" button in JobServer settings
                    you can also import a licence file via drag and drop

=== 22.01.2016 ============================================================================
 - Version........: 3.1230 // J.Fes
 - Categorie......: Install and Setup 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Unused ..12-Data\_Rf_MC_ConvertLog Direcory  
                    will be automaticly removed from System

=== 22.01.2016 ============================================================================
 - Version........: 3.1230 // J.Fes
 - Categorie......: Install and Setup Settings 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: From this Version setting Dir_Root3_10JobLogArchivAlternative_DP need to update
                    If rule was in use existing setting will be 1 time automaticly updated with subdir \JobManagerV2
                    !!-- Please check settings after update --!!

=== 14.01.2016 ============================================================================
 - Version........: 3.1230 // S.Gueth
 - Categorie......: Settings 
 - Type...........: Change: 
 - Description....: added Excel 2007 export format (*.xlsx) to excel export
                    you can choose between Excel 2007 (*.xlsx) and Excel 97-2003 (*.xls) format
                    *.xlsx is now the default export format

=== 11.01.2016 ============================================================================
 - Version........: 3.1230 // S.Gueth/A.Becker/J.Fes
 - Categorie......: Install and Setup 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-2477
 - Description....: ******************** NEW Software Release PLMJobManagerV3 *********************
                    **                                                                           **
                    ** Version change:                                                           **
                    **  - from: V2 PLMJobMangerV2 uses .NET Frame Work 2.0                       **
                    **  - to..: V3 PLMJobMangerV3 uses .NET Frame Work 4.5                       **
                    **                                                                           **
                    ** Hints:                                                                    **
                    ** ------                                                                    **
                    **  - The new Release requires installed .NET Frame Work 4.5                 **
                    **    on all Computers using JobServer or JobClient software components      **
                    **  - Apllication root diretory is now: ..\JobManagerV3                      **
                    **  - Older Version V2 based on .NET Frame Work 2.0 is still avilable on web **
                    **    http://download.plmjobmanager.com/JobManagerV2/V2-0001-LatestVersion/  **
                    ******************** NEW Software Release PLMJobManagerV3 *********************

=== 18.12.2015 ============================================================================
 - Version........: 2.1221 // J.Fes
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: IrInfoResolve_2011_06 Enhanced
                    Now we support #BOMview Info and #BOMviewRevision Info

=== 16.12.2015 ============================================================================
 - Version........: 2.1221 // J.Fes
 - Categorie......: Install and Setup Settings 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: Commandline parameter renamed 
                    from TCEGroup to TCGroup
                    from TCEGroup to TCGroup

=== 14.12.2015 ============================================================================
 - Version........: 2.1221 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2440
 - Description....: SubAction 'NXJournalExecute' for Action 'NxDataProcessing_2013_09'
                    to execute an journal for NX
                    for more info please have a look into the cmd tools docu of 'NxDataProcessing_2013_09'

=== 11.12.2015 ============================================================================
 - Version........: 2.1221 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: DataShare - and DataShareEval processes can now be executed only for ItemRevisions
                    just set the variable 'ObjectClass' in the TcSiteCons.cmd job script to 'ItemRevision' (default is 'Item')
                    example: set ObjectClass=ItemRevision

=== 04.12.2015 ============================================================================
 - Version........: 2.1221 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobControl sort order based on Dataset Types improved
                    If JobRoule includes Datasets of IRs then order of:
                    
                    NX Datasets are:
                     - UGMASTER     
                     - UGALTREP    
                     - UGMANIFESTATION    
                     - UGPART   
                     - all other NonMaster DataSet Types like UGSCENARIO..CAEGEOM..NXMotin ... 
                    
                    IDEAS Datasets are:
                     - IdeasPart
                     - IdeasAssemblUGPART   
                     - IdeasDrawing
                    
                    ProE Datasets are:
                     - ProPrt
                     - ProAsm   
                     - ProDrw
                    
                    Catia Datasets are:
                     - CATPart
                     - CATProduct   
                     - CATDrawing

=== 25.11.2015 ============================================================================
 - Version........: 2.1221 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: ItemId search supports now wildcards 
                    If searching value of ItemIds contains wildards then all  
                    Items and Irs are listed. 
                     
                    for example you are able to import all Items and IR's 
                    via 4700*

=== 25.11.2015 ============================================================================
 - Version........: 2.1221 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Refile Option dialog enhanced
                    - refile options now orgeniced by captures.
                    - Captures are show with 'gold' BackColor
                    - NX10 refile options added 
                    - Filter in options are posible

=== 24.11.2015 ============================================================================
 - Version........: 2.1220 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobControl Object selection methodes enhanced 
                    Now you can select all Data of Item via new option: ALL_of_ITEM
                    See: JobContol Rules sel:O.Special

=== 19.11.2015 ============================================================================
 - Version........: 2.1220 // A.Becker
 - Categorie......: ObjectJobResults 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: JobLog Link can be direct opened from a 7-Zip file.

=== 16.11.2015 ============================================================================
 - Version........: 2.1220 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: New Option to control how JobData handelt if a ne Job is created.
                    see: -> Edit JobControl Rule 
                         |-> Job Definitionen Extended  
                          |-> 3 Job Managment Extendet 
                           |-> 1 New Job Process Data Handel (Default is AddEdit2JobNew)

=== 10.11.2015 ============================================================================
 - Version........: 2.1219 // A.Becker
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: JobClient writes log informations to %temp%\JobClient\JobClient.log (Levels info/warning/error/fatal).
                    Fatal unhandled exceptions are logged to %temp%\JobClient_UnhandledException.log (But they should normally never occour).

=== 09.11.2015 ============================================================================
 - Version........: 2.1219 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: If there was no Refile Result found and no result from the nx syslog, then the process monitor log will be parsed
                    This result will be written in the refile result message, Example:
                    Result Message: [Rf:ERR:PM Terminated:none of the monitored files was written to within 600 sec.]
                    Result Code is: JM-999070

=== 07.11.2015 ============================================================================
 - Version........: 2.1219 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Sync.Site.Data compairs now also ExportRecorde ExportRecordeData
                    If TC.DB and JM.DB Export Recordes differs then Data will updatet

=== 07.11.2015 ============================================================================
 - Version........: 2.1219 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Outputformat of Exception messages optimiced
                    - Output with is minimiced
                    - Useless SourceCode pathes removed
                    - Stack trace contains numers in front of message

=== 06.11.2015 ============================================================================
 - Version........: 2.1219 // S.Gueth
 - Categorie......: GUI 
 - Type...........: New: 
 - Description....: In the column "J.last Info" of the table "JobComputer Computers" in the 
                    JobServer you will now see the current system load of the client
                    (CPU utilization, memory usage, free disc space state)
                    if there is a warning or an error this column cell will get the 
                    coresponding background color:
                    Sys load: OK  --> green
                    Sys load: WRN --> cyan
                    Sys load: ERR --> red

=== 05.11.2015 ============================================================================
 - Version........: 2.1219 // A.Becker
 - Categorie......: ObjectJobResults 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2411
 - Description....: Implemented 7-Zip compression for job archive packages.
                    For optimized archive size choose SevenZipPPMd implementation with Highest compression level.
                    Important: 7-Zip will be used as default from now on. If you need ZIP archives, you have to change the compression settings.

=== 05.11.2015 ============================================================================
 - Version........: 2.1219 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: New behavior during creating Jobs.
                    To reduce times for creating new Jobs we do create pre JobResults in this phase NOT anymore.
                    Only Objects P.Status is changed. 
                    Hint: JobResults will be createt to JobMgr Database when JobResults returns from JobClients.

=== 21.10.2015 ============================================================================
 - Version........: 2.1219 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: If Result Classification Custom rues are used (via: -ResultClassificationCustom_DPNE ..)  
                    and one of the Results are interpreted as a Warning Objects.P.Res.Has.WRN is set to true

=== 16.10.2015 ============================================================================
 - Version........: 2.1218 // A.Becker
 - Categorie......: GUI 
 - Type...........: New: 
 - Description....: When you press the reset filter button while holding the shift button, 
                    all filters are then reset (including object id and object group field)

=== 14.10.2015 ============================================================================
 - Version........: 2.1218 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: Property 'MD.Volume Deviation Percentage Result Rules'
                    Update of default values to:
                     OK.....: 0,000% - 0,005%
                     WRN....: 0,005% - 0,050%
                     ERR....: 0,050% - ....

=== 06.10.2015 ============================================================================
 - Version........: 2.1218 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Issue.: Sync.Site Data process stopt because of SQL CommandTimeout's 
                             during reading ItemData form TC.DB
                    Change: Now SQL command is using Site defined 'Command Time Out settings [sec]'

=== 05.10.2015 ============================================================================
 - Version........: 2.1217 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: On 'Sync.Site.Data' did not delete non existing ITEM Data from JobMgr.DB
                    Issue are solved by code changes.

=== 05.10.2015 ============================================================================
 - Version........: 2.1217 // S.Gueth
 - Categorie......: JobControl Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: JobClient - JobServer checks now if the Memory usage of JobClient is not to high.
                    If the Memory usage is to high, JobClient recives !! -NO new Job- !!
                    Message is shown in JobClient and in JobServer
                    
                    See also settings in JobServer Settings

=== 05.10.2015 ============================================================================
 - Version........: 2.1217 // S.Gueth
 - Categorie......: JobControl Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: JobClient - JobServer checks now if the CPU utilization of JobClient is not to high.
                    If the CPU utilization is to high, JobClient recives !! -NO new Job- !!
                    Message is shown in JobClient and in JobServer
                    
                    See also settings in JobServer Settings

=== 21.09.2015 ============================================================================
 - Version........: 2.1217 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Edit Process status: Supports now selection of data via 'Grid-Cells'.
                    This enhancment improves selection of data to edit the process status.

=== 16.09.2015 ============================================================================
 - Version........: 2.1217 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: OwingGroups supports now SubGroups GR1.GR2.GRn

=== 02.09.2015 ============================================================================
 - Version........: 2.1217 // A.Becker
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: The column chooser of the data grid can be filtered.

=== 02.09.2015 ============================================================================
 - Version........: 2.1217 // A.Becker
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: Object list can be populated from selected controls.
                    The object list editor provides new functions to modify elements.

=== 02.09.2015 ============================================================================
 - Version........: 2.1217 // A.Becker
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: Object list can be populated from selected controls.
                    The object list editor provides new functions to modify elements.

=== 28.08.2015 ============================================================================
 - Version........: 2.1217 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2396
 - Description....: Enhancement of DataShare Eval Prozess
                    you can now define DataSet relation Exclude Lists and DataSet Type Exclude Lists
                    these lists will be defined via the new ActionSettings_cls in the cmd tools
                    a file with the name #Action#_Settings.xml has to be in the JobRoot_DP

=== 27.08.2015 ============================================================================
 - Version........: 2.1217 // A.Becker
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: The Performance of object listing via InputLists is highly improved now.

=== 27.08.2015 ============================================================================
 - Version........: 2.1217 // A.Becker
 - Categorie......: GUI ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: The Search-and-List process is partly moved to background.
                    While the database query runs, the process can be cancelled by the user.

=== 27.08.2015 ============================================================================
 - Version........: 2.1217 // A.Becker
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: The new ObjectGrouping feature allows to remember and select sets of objects using custom groups.

=== 21.08.2015 ============================================================================
 - Version........: 2.1217 // S.Gueth
 - Categorie......: JobControl Scripting Settings 
 - Type...........: New: 
 - Description....: JobClient can start PowerShell script files (*.ps1) directly

=== 10.08.2015 ============================================================================
 - Version........: 2.1216 // S.Gueth
 - Categorie......: JobControl 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2349
 - Description....: Enhancement: Improving performance to generate faster Job's 
                    Therefor a extension ist programmed that commit of 'JobResults' 
                    is now running in a extra thread. The thread is running parallel 
                    to the JobControl Services and improves the generation of new Job's.

=== 10.08.2015 ============================================================================
 - Version........: 2.1216 // S.Gueth
 - Categorie......: JobControl 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2349
 - Description....: Enhancement: Improving performance to generate faster Job's 
                    Therefor a extension ist programmed that commit of 'JobResults' 
                    is now running in a extra thread. The thread is running parallel 
                    to the JobControl Services and improves the generation of new Job's.

=== 07.08.2015 ============================================================================
 - Version........: 2.1216 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: Parameter "ExecuteMacroViaUGRouter" in Action "NxDataProcessing_2013_09_02", Subaction "NXMacroExecute"
                    defines if the macro should be executed via UGRouter.exe
                    NX will be closed on start when it was allready open
                    NX has to be started new each time via UGRouter exe to execute the macro

=== 03.08.2015 ============================================================================
 - Version........: 2.1216 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Refile of Datasets (JobMgr_RfDataSets=ON) extendet.
                    Now Refile 'Error explanation: Text is now parst from Rf.log file.
                    
                    P.ResCode = Rf-DS
                    P.Res.Msg = Text after 'Error explanation: 
                    #Example Data of Rf.log files:
                    Failed to refile @DB/4711/A/specification/4711-A.
                    Error explanation: The dataset has a newer version in Teamcenter than in this session
                    ** Refiling Complete **
                    
                    Value of result Message
                    P.Res.Msg = [Rf.ERR:The dataset has a newer version in Teamcenter than in this session]

=== 03.08.2015 ============================================================================
 - Version........: 2.1216 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Refile of Datasets (JobMgr_RfDataSets=ON) extendet.
                    Now Refile 'Error explanation: Text is now parst from Rf.log file.
                    
                    P.ResCode = Rf-DS
                    P.Res.Msg = Text after 'Error explanation: 
                    #Example Data of Rf.log files:
                    Failed to refile @DB/4711/A/specification/4711-A.
                    Error explanation: The dataset has a newer version in Teamcenter than in this session
                    ** Refiling Complete **
                    
                    Value of result Message
                    P.Res.Msg = [Rf.ERR:The dataset has a newer version in Teamcenter than in this session]

=== 16.07.2015 ============================================================================
 - Version........: 2.1215 // J.Fes
 - Categorie......: ObjectList 
 - Type...........: Change: 
 - Description....: DataColume in DataGrid renamed 
                    from: O.Type(SP/AP)
                    to..: O.SP/AP/NP

=== 13.07.2015 ============================================================================
 - Version........: 2.1215 // J.Fes
 - Categorie......: DB Settings 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: New Function in JobServer: Create quick a full backup of JobMgr.DB.
                    See: Extra->Setup->Setup database->database maintain->25 - Create a new backup of JobMgr.DB
                    
                    Note: Function will only be executed on JobMgr-SQL Server.

=== 13.07.2015 ============================================================================
 - Version........: 2.1215 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 

=== 02.07.2015 ============================================================================
 - Version........: 2.1215 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-2389
 - Description....: The MD.Volume values will now be converted from unit cm^3 to unit mm^3
                    Hint: The values are not changed in CB.xml files. The values are there still in unit cm^3

=== 02.07.2015 ============================================================================
 - Version........: 2.1215 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-2389
 - Description....: Changed default values for "MD.Volume Deviation Result Rules" in CB Settings from cm^3 to mm^3
                    OK:  0,000 mm^3 - 0,001 mm^3 
                    WRN: 0,001 mm^3 - 0,010 mm^3
                    ERR: 0,010 mm^3 - ...

=== 24.06.2015 ============================================================================
 - Version........: 2.1215 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-1182
 - Description....: Refile evaluation support's now also motion part's

=== 24.06.2015 ============================================================================
 - Version........: 2.1215 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-2386
 - Description....: Enhanced generation of input file for 'DataShare', 'DataSync' and 'FlipTheSwitch' process 
                    IMPORTAND: in Action 'TcMultiSite_2012_02' and Subaction 'DataSync|DataShare|FlipTheSwitch' 
                    the parameters 'DataSync_ItemList_DPNE|DataShare_IRList_DPNE|FlipTheSwitch_IRList_DPNE' changed to 'InputList_DPNE'
                    please check this in your script
                    new parameters:
                    'ClassOutType' : defines for which type the input list should be exported, default: I (Item)
                    'ClassOutContent' : defines which content should be exported to the input list, default: ID

=== 19.06.2015 ============================================================================
 - Version........: 2.1215 // S.Gueth
 - Categorie......: Install and Setup 
 - Type...........: Doc: 
 - Description....: With Version 1.0.1.7 the JobManagerUpdate program can be updated by itself

=== 19.06.2015 ============================================================================
 - Version........: 2.1215 // S.Gueth
 - Categorie......: Install and Setup Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: It is possible now to set a password in the JobManagerUpdate program 
                    to decrypt password protected zip files
                    Just open JobManagerUpdate.exe > Setup > Settings > Zip File Settings and edit Password

=== 17.06.2015 ============================================================================
 - Version........: 2.1214 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2383
 - Description....: added "EN.ViewDependent Mappers" in CheckBox Settings
                    defines ViewDependent mappings for all entities
                     if the ViewDependent name contains the string of 'Text 1' or 'Text 2' 
                    then it will be replaced with the string of 'Map Alias'

=== 17.06.2015 ============================================================================
 - Version........: 2.1214 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2383
 - Description....: added "EN.Text Mappers" in CheckBox Settings
                    defines Text mappings for all entities
                     if the text contains the string of 'Text 1' or 'Text 2' 
                    then it will be replaced with the string of 'Map Alias'

=== 16.06.2015 ============================================================================
 - Version........: 2.1214 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Description....: SQL to analyse Presice BOMS are updated
                    Now we using in 'BOMc_Precise.SQL' Script 
                     PSTRUCTURE_REVISIONS  
                    With this change we are able to read also BOM's that missing 
                     POM_BACKPOINTER releations.

=== 09.06.2015 ============================================================================
 - Version........: 2.1213 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: New: 
 - Description....: Object data contains now for ItemRevision (IR) and Dataset (DS) data 
                    new columes: 'Ir.Rank'
                     - Ir.Rank  determined via 'Latest by IR Creation Date' or 'Latest by AlphaRevOrder'    
                    
                    Please check settings in: 
                     Sites/Data Import -> Edit Site def. --> Site Import Setting 1   
                                       -> Imoprt Data Conditions -> Lastest Item Revison Rule 
                    
                    Hint: If you change setting of 'Lastest Item Revison Rule'
                          Please Update data via:
                     Sites/Data Import -> Imp.Extended -> 'Updated.Site Ir.Rank via Rev.Rule'

=== 05.06.2015 ============================================================================
 - Version........: 2.1212 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2379
 - Description....: It is now possible to add a customer NxSyslog parser in the refile process.
                    Methode is desinged for parsing customer data from NX.Syslog files. 
                    Results are contained in P.Result.Msg and own in a new section: [CustomKey:..]
                    
                    For usage: 
                    1. Rename in dir 
                       ..\10-JobScripts\RefileNX##\ClientScripts\Resources
                       File.: RfNxSylog_ResClRules_Custom_template.xml
                       to...: RfNxSylog_ResClRules_Custom.xml
                    
                    2. Edit settings in: RfNxSylog_ResClRules_Custom.xml
                    
                    3. define in Job script:
                       set ResultClassificationCustom_DPNE=%CmdCurRoot_DP%\Resources\RfNxSylog_ResClRules_Custom.xml
                       or:
                       set ResultClassificationCustom_DPNE=#JobRoot_DP#\Resources\RfNxSylog_ResClRules_Custom.xml

=== 29.05.2015 ============================================================================
 - Version........: 2.1212 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: It is now posible to define how many Job's of o specific JobRule
                    may run on a JobClient. 
                    Please define it in JobControl -> JobRules -> JobComputer 
                    Syntax...: ComputerName1:n[:NoFurtherJob];ComputerName2:n[:NoFurtherJob]
                    
                    Example 1: Computer1:2;Computer2:5
                    Example 1: Computer1 runs max 2 Jobs of JobRule
                    Example 1: Computer2 runs max 5 Jobs of JobRule
                    
                    Example 2: *:1
                    Example 2: All Computer runs 1 Job of JobRule
                    
                    Example 3: Computer1:1:NoFurtherJob;Computer2:5:NoFurtherJob
                    Example 3: Computer1 runs max 1 Jobs of JobRule 
                    Example 3: Computer2 runs max 5 Jobs of JobRule
                    Example 3: Behavior like Example 1 but if computer runs n JobMax then NO further job is searched in other JobRules

=== 28.05.2015 ============================================================================
 - Version........: 2.1212 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2375
 - Description....: a syslog section file will now be written for each refiled object
                    this file is also available via J.Link

=== 26.05.2015 ============================================================================
 - Version........: 2.1212 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: New TC.Site Data Import Dialog created.
                    Now it is posible to Import TC.Site Data in TimeFrames begin/end.
                    With this methode it is posible to import Data form TC with more then 1 JobServer.

=== 20.05.2015 ============================================================================
 - Version........: 2.1212 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: in Job's selecting Items now function to  
                    add 'IR' Data to JobPacket is avialble.
                    Enhancment is Done by code changes.

=== 12.05.2015 ============================================================================
 - Version........: 2.1212 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: PLMPerformanceAnalyse: parameter: "IgnoreMultipleLoggedInUsers"
                    determines if multiple logged in users with same username on the same pc should be ignored or not (default is false, should not be ignored)

=== 06.05.2015 ============================================================================
 - Version........: 2.1212 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: SubAction "StepExport" in Action "NxDataProcessing_2013_09"
                    Method to export Step files

=== 06.05.2015 ============================================================================
 - Version........: 2.1212 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: -Action "NxDataProcessing_2013_09" -SubAction "ParaSolidExport"
                    Method to export ParaSolid files

=== 06.05.2015 ============================================================================
 - Version........: 2.1212 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: SubAction "DxfDwgExport" in Action "NxDataProcessing_2013_09"
                    Method to export Dxf or Dwg files

=== 21.04.2015 ============================================================================
 - Version........: 2.1211 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: SubAction "Refile_Part" in Action "RefileTC_2012_01" for refiling single dataset parts
                    to use it, set following in JM->Script/Param.->JC.Script(cmd).ParamExt:
                    set JobMgr_RfPart=ON

=== 21.04.2015 ============================================================================
 - Version........: 2.1211 // S.Gueth
 - Categorie......: Settings JCT 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: SubAction "Refile_Part" in Action "RefileTC_2012_01" for refiling single dataset parts
                    to use it, set following in JM->Script/Param.->JC.Script(cmd).ParamExt:
                    set JobMgr_RfPart=ON

=== 16.04.2015 ============================================================================
 - Version........: 2.1211 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobServer Titel Version info changed to new format
                    Syntax is now: VX.YYYYY (Build:DD.MM.YYYY)
                    Example:       V2.12117 (Build:16.04.2015)

=== 15.04.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Scripting 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Renamed function: 
                    from: IRs_and_Datasets_ImportFromTcDB_DoImportForIR 
                    to..: IRs_and_Datasets_ImportFromTcDB_DoImportForIR_Control

=== 14.04.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Scripting 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Code changes on Class Datasets_and_Irs_cls
                    General:
                     Property DataType now changed generic types
                     Please change in JS.Scripts 
                     for example: 
                     from: IrExportRecord.Value = "MyValue"
                     to..: IrExportRecord = "MyValue"

=== 26.03.2015 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: TCRefile: If no result in Refile JobLogFile was found, but everything in NX.Syslog is OK, then the object will get a warning (not an error) 
                    Res.Msg: [Rf:WRN:No refile results in RefileJobLogFile found!][Rf.NX.Syslog:LoadUp:OK,LoadDisp:OK,Save:OK,SecEnd:OK] becomes WRN in JobManager

=== 26.03.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Description....: On Importing manuel (via Extras->Import data of Item / IR) 
                    If you add only the item name to the input dialog then all data of Item and IR will be imported.

=== 26.03.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Description....: On Importing manuel (via Extras->Import data of Item / IR) 
                    If you add only the item name to the input dialog then all data of Item and IR will be imported.

=== 24.03.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Outputformat of CheckBox result report enhanced
                    - Parthistory lists now matching matching parthistory
                    - Parthistory shows now which of the parthistory entries presents  
                      the last interactive save action (Last int. save)

=== 18.03.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction Status_remigrate_ResultEval
                    If no data from TC extracted for a remigrated Object then the following message is added to the P.Res.Msg:
                    [Status:ERR:no status info extracted form TC. Please !Chk data in TC!]

=== 18.03.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction Status_remigrate_ResultEval
                    If no data from TC extracted for a remigrated Object then the following message is added to the P.Res.Msg:
                    [Status:ERR:no status info extracted form TC. Please !Chk data in TC!]

=== 09.03.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Handling of exceptions and errors during generating JobPacket's is improved.
                    
                    If an exception or error appears a detailed message is printet 
                    in JobManager and on JobClient:
                     - if JobScript template file is missing
                     - if an general exception happend
                    
                    Issues is solved by code changes.

=== 09.03.2015 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2294
 - Description....: New setting 'PH.Attributes Mapper' in CheckBox settings manager.
                    It can be used to map attributes having diffrent 'Attribute Titel' between NX versions

=== 20.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Settings 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobManager settings containing now a note field
                    This can be used ta add notes belonging to the JobManger settings.
                    
                    see: JobMgr -> Extra -> Setup -> Settings -> Tab JobServer -> 01 Customer Notes -> 01 Customer Notes

=== 20.02.2015 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: SubAction 'I_IR_BOM_DS_eval' for Action 'TcMultiSite_2012_02'
                    compares two Items with its ItemRev, Bom and Dataset informations
                    Section   Meaning            ResCode on Error
                        I..   Item               200
                        IR.   ItemRevision       300
                        BOM   Bill of Material   400
                        DS.   Dataset            500

=== 16.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: During import in some cases Item.puid or Ir.puid value has been empty.
                    Now data import checks if value is empty and try's to read the puid data again.
                    #Hint: this issue is in evaluation phase.

=== 16.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Body.Density check was in case of specific regional settings wrong.
                    Body.Density are now using Type decimal. 
                    With this change compairing results via Body.Density <= 0 are correct.

=== 16.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobManger did not write in all cases data to the JobManager log files.
                    Issue is now solved by code changes.

=== 11.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes+S.Gueth
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobClient - JobServer checks now if JobClient has enough Disk Space.
                    If not enough Disk Space is avialble JobClient recives !! -NO new Job- !!
                    Message is shown in JobClient and in JobServer
                    
                    See also settings in JobServer Settings

=== 09.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Multisite Export Recorde Data contains now 'only' SiteID's of Sites 
                    that are registerd in JobMgr Site list (see tab:'Sites/Data Import').

=== 07.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: New Setting:'AS.Comp.InstancName chars ignor list' available
                    Now you can define a list of chars that are ignored during comparing Assembly Component InstanceName.

=== 06.02.2015 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JobControl Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: '93.04 Sites SQL Server CPU Utilization Settings' added in JobServer settings:
                    Setup Sites SQL Server CPU Utilization Settings, for checking the lokal CPU utilization for the SQL Server of the TC Site 
                    
                    These are general settings for all sites, but can be overwritten on each JobRule at:
                    'JobControl Rules' -> 'Job Def Extended 2' -> 2.3 'Sites SQL Server CPU Utilization Settings'

=== 06.02.2015 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JobControl Settings 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: Host Drive Settings settings added in JobServer settings:
                    -- List of local disk to check disc space: 
                       Setup witch local drives of the clients will be checked for the available free disc space
                    -- Local Drives space check: OK lower bound (GB): 
                       Setup the lower bound of the local disk space check, until it returns OK (default is 4GB)
                    -- Local Drives space check: ERR upper bound (GB): 
                       Setup the upper bound of the local disk space check, until it returns ERR (default is 1GB)

=== 04.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction finalChk_ResultEval
                    BOMCompair Rules Changed:
                    If no 'BOM.xml pre' exist results is now set to ResultCode=0 Result.Status=D.WRN (Warning)
                    Before this change it result was set to ResultCode=BOM-101 Result.Status=D.ERR (Error)
                    Change done upon consultation Klaus Langer and Josef Feuerstein

=== 04.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 

=== 04.02.2015 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JobControl 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2286
 - Description....: JobClient reports the free space of the local drives
                    Default Values: (editable in JobServer Settings)
                    OK > 1 GB
                    WRN between 0.1 and 1 GB
                    ERR < 0.1 GB (connection to JS will be skipped)

=== 03.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobMgrDataOrg supports now also Nativ (File based) ObjectData   
                    
                    Native Files are stored in following directory structure:
                    #JobMgrDataRoot_DP#\#SiteId#\#ObjectFs_Vol#\#ObjectFs_NE#\..

=== 03.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Type...........: Change: 
 - Description....: If a Site is a nativ Site then ObjectFs_VOL value is the 
                    partial part of the full path to the File Object
                    #Example: SiteDef.Nativ Root Dir: 'D:\NxData\Test1'
                              ObjectFs_DPNE.........: 'D:\NxData\Test1\Product1\MainParts'
                              ObjectFs_VOL..........: 'Product1\MainParts'

=== 03.02.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: CheckBox Tools Supports now nativ mode.

=== 30.01.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: If a Job do not return any Job.Results then 
                    JobData will be set to following results:
                    P.Res.Code.............: JM-999999
                    P.Res.Msg..............: [ERR:Job did not returned any JobResults]
                    P.Res.Status...........: D.U.ERR

=== 29.01.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ProcessGroups 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Names and description of ProcessGroups settings are reorganized.
                    ProcessGroup settings are now better to understand.

=== 28.01.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobResults contained in *_JobResultsGenericV1.Log did not worked anymore.
                    Reason was because files with name pattern *_JobResultsGenericV1.Log was not extracted from Job.zip file. 
                    Issue is now solved by code changes.

=== 23.01.2015 ============================================================================
 - Version........: 2.1210 // J.Fes+A.Becker
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Local time of JobClient was wrong transverd to JobServer if a timesone has been in between.
                    Issue is now fixed by code changes

=== 22.01.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: New setting: Check behavior for Text that 'Empty or blanked'
                    You now can define if 'Drafting.Text[s].Values' are both 'Empty or blanked' is to be checked
                    By default 'Empty or blanked' is not checked

=== 22.01.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: ChecBox - Result Viewer did NOT displayed in all cases the .tif files 
                    that belongs to the same .tif group.
                    Issue is solved by code changes.

=== 21.01.2015 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobServer analyses ImPrecice BOM's by
                    Now via Ir creation Date. Before it was analyses by max(IR-ID).
                    Changes are done by updating BOMc_ImPrecise.SQL + BOMc_ImPrecise_TCUA.SQL

=== 06.01.2015 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2285
 - Description....: Property 'MD.Volume Deviation Percentage Result Rules' in ModelData
                    defines result classification rules for percentage volume deviation

=== 05.01.2015 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: CheckBox 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2285
 - Description....: Parameter 'CBMoveExtractedFilesToArchive' in CB config
                    Defines if extracted CheckBox files (xml, cgm) should be moved to the archive or not
                    Default is 'true'
                    HINT: if 'false', then extracted files will be deleted

=== 30.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction Status_final_ResultEval 
                    In case a Item/Rev contains has 'NO' 3D cmm part (of Types:IdeasPart,IdeasAssembly,ProPrt,ProAsm). 
                    but contains 1 UgMaster then results are returned as OK.

=== 30.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction Status_final_ResultEval 
                    In case a Item/Rev contains has 'NO' 3D cmm part (of Types:IdeasPart,IdeasAssembly,ProPrt,ProAsm). 
                    but contains 1 UgMaster then results are returned as OK.

=== 27.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: TaskScheduler 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Issue: Tasksheduler Job's with defined TimePoints [TP=HH:MM][TP=HH:MM] dit not worked anymore.
                    Issue is now solved by code changes in JobServer and JFProgLib.dll.

=== 18.12.2014 ============================================================================
 - Version........: 2.1210 // A.Becker
 - Categorie......: Settings 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: User Settings are stored in a XML file instead of the windows registry.
                    The file is located in the users directory within 01-BinServer.Custom
                    Use the methods from the new UserSettings class to load or save values.

=== 17.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction CMM_ResultEval
                    Parsing of cmm logfiles enhanced for ProDrw 
                    Now in CMM.log we searching for Key: '   * Processing drawing:' + #ItemId#/#RevId#

=== 17.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction CMM_ResultEval
                    Parsing of cmm logfiles enhanced for ProDrw 
                    Now in CMM.log we searching for Key: '   * Processing drawing:' + #ItemId#/#RevId#

=== 16.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Admin 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobMgr Database Setup/Update
                    New Setup avialble to run a Custom T-SQL Script List in JobMgr Database.
                    
                    Use Extra->SETUP->Setup database->Datbase Setup->21 - Database Custom Setup ...
                    and select in  file dialog one of your custom T-SQL Script List File (*SQLScriptList.txt)

=== 16.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Admin 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobMgr Database Setup/Update
                    If running a T-SQL script via Extra->SETUP->Setup database->Execute T-SQL Script (via Fileselect) ... 
                    then now JobMgr waits after executing the selected T-SQL script.

=== 16.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Filter for ObjectData extendet:
                    Now it is also posible to search for data via 'Object Puid'

=== 12.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction CMM_ResultEval
                    In case a Item/Rev contains has 'NO' 3D cmm part (of Types:IdeasPart,IdeasAssembly,ProPrt,ProAsm).
                    but contains 1 UgMaster then:
                    Returns OK if 1 UGMASTER exist with name schema: ItemId-RevId
                    Returns WRN if 1 UGMASTER exist other name schema: ItemId-RevId

=== 12.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction finalChk_ResultEval
                    In case a Item/Rev contains has 'NO' 3D cmm part (of Types:IdeasPart,IdeasAssembly,ProPrt,ProAsm).
                    but contains 1 UgMaster then results are returned as OK.

=== 12.12.2014 ============================================================================
 - Version........: 2.1210 // A.Becker
 - Categorie......: GUI ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: GridLayout Customer Defaults for Objects List can be easy selected by a new control above the objects FilterPanel.
                    It features Layout Default-Restore, Save/Restore custom layout, Quick Restore custom layout from dropdown.

=== 12.12.2014 ============================================================================
 - Version........: 2.1210 // A.Becker
 - Categorie......: GUI ObjectList 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: Objects Filter Customer Defaults can be easy selected by a new control above the objects FilterPanel.
                    It features Layout Default-Restore, Save/Restore custom layout, Quick Restore custom filter from dropdown.
                    In addition the last 10 filters used are automatically saved by a feature called RingBuffer.

=== 12.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction CMM_ResultEval
                    In case a Item/Rev contains has 'NO' 3D cmm part (of Types:IdeasPart,IdeasAssembly,ProPrt,ProAsm).
                    but contains 1 UgMaster then:
                    Returns OK if 1 UGMASTER exist with name schema: ItemId-RevId
                    Returns WRN if 1 UGMASTER exist other name schema: ItemId-RevId

=== 12.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction finalChk_ResultEval
                    In case a Item/Rev contains has 'NO' 3D cmm part (of Types:IdeasPart,IdeasAssembly,ProPrt,ProAsm).
                    but contains 1 UgMaster then results are returned as OK.

=== 09.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: If JobServer start's with JobControl:A or JobControl:R 
                    then Titel of JobServer will contain string 'JobControler' 
                    
                    If JobServer start's with TaskScheduler:ON  
                    then Titel of JobServer will contain string 'TaskScheduler'

=== 05.12.2014 ============================================================================
 - Version........: 2.1210 // A.Becker
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: The application standard grid layouts can be updated using the View->Restore functions
                    while holding the Shift-Key. This modifies the Action from Restore to Store.

=== 05.12.2014 ============================================================================
 - Version........: 2.1210 // A.Becker
 - Categorie......: GUI ProcessGroups 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: Added a new property [ProcStateKind] to the details of a ProcState.
                    The value of this property modifies the behavior of the ProcState as follows:
                    Normal: The same behavior like before
                    QueryOnly: The ProcState cannot be selected to manually set a Process Status
                               Can be used for status which only will be set by processes for for combined query status like T;RUN;XX
                    VisualSeparator: The name and display text become fixed and the ProcState is no more selectable by the user.
                                     The default separator colors are DarkGray/Transparent, but they can be overridden by custom color selection.
                                     The only purpose is to provide visual separations between groups of ProcStates.

=== 04.12.2014 ============================================================================
 - Version........: 2.1210 // A.Becker
 - Categorie......: GUI 
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Description....: New structure for grid layout saved files. The extension changed from .xml to .jsgl (JobServer GridLayout)
                    Multiple custom table layouts can be saved with given names.
                    Each Grid has its own folder under 01-BinServer.Custom\_CustomDefaults\Settings\
                    Refer to detailed documentation in file:///V:\JobManager\ProgEntw\Ver03\JobManagerV3\10-Documentation.Application.Working\01-Dokumentation-Entwicklung\JobManagerV3_EntwDokumentation_A.Becker.pptx
                    See on page 01.12.2014 Entwicklung JobManager: Organizazion of saved GridLayouts

=== 04.12.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "NxDataProcessing_2013_09" add new -SubAction "NXMacroExecute"
                    With this Tool you can run an NX.macro on each NX.Dataset it is containd in the JobPacket.
                    Details see: ..03-BinPublic.ClientServer\JobManagerCmdTools_Docu\30.NxDataProcessing_2013_09\NxDataProcessing_2013_09_01_docu.txt

=== 04.12.2014 ============================================================================
 - Version........: 2.1210 // A.Becker
 - Categorie......: GUI ObjectJobResults Settings 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: The custom ProcStates can be edited direct from the View-Menu for the current procStateCol.
                    After edit, the columns in the grid are updated instantly.

=== 04.12.2014 ============================================================================
 - Version........: 2.1210 // A.Becker
 - Categorie......: GUI ObjectJobResults Settings 
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: The custom columns for process results can be edited direct from the View-Menu for the current procStateCol.
                    After edit, the columns in the grid are updated instantly.

=== 28.11.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JobControl JCT 
 - Type...........: New: 
 - Description....: Added JobData4PostAction Class, to define PostActions that will be done in the JobServer after a Job was processed on the client
                    for example: renaming of an object, deleting an object etc...

=== 05.11.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: AdminMode is nwo avilable.
                    To prevent unmeant changes in JobServer config settings a new AdminMode Button is 
                    added to the JobServer toolbar.
                    Config settings are stored in Grids of 'Sites/Data Import' 'Scripts/Param' 'Job Control'
                    If enabled you can edit the config settings in JobServer. 
                    If disabled you can NOT edit the settings in JobServer.

=== 05.11.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Install and Setup 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Updating JS.Databases via executing SQL Scripts  
                    'logic' for continue runnig SQL Scripts Is changed
                    
                     if clicking 'YES' each Scripts will be processed without stoping after executing
                     if clicking 'NO' after processing each Scripts process will 'stop'

=== 05.11.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: CommandLineArgs 
 - Type...........: New: 
 - Description....: New command line argument "/WorkInstTitel" for JobClient and JobServer available.
                    Specifies the 'JobServerWorkInstance' titel.
                    #Doc Info: If not set, 'JobServerWorkInstance' from settings.xml will be used.
                    
                    #Exa: /WorkInstTitel P.System-01

=== 05.11.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: CommandLineArgs 
 - Type...........: New: 
 - Description....: New command line argument "/TCPPort" for JobClient and JobServer available.
                    Specifies the port on that JobClient's connecting to the JobServer. 
                    Doc Info: If not set, port from settings.xml will be used.
                    
                    #Example: /TCPPort 13001

=== 03.11.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Usning in JobControl -> JobComputer Scripts lead in case that JobComputer Data was not saved 
                    to a Error. Issue is now saved by code changes

=== 30.10.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: In JobScripts also Windows PowerShell Scripts *.ps1 can be selected.
                    All Windows PowerShell Scripts (*.ps1) containd in JobScript directory 
                    will be filled out with the value of the placeholder variables. (placeholder Example: #03-BinPublic_DP# ..)

=== 30.10.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction FinalResultEval
                    Excutes now also -SubAction BOMCompair
                    After this Update Process BOM eXtract for JobData1ToProcess is needet before running -SubAction finalChk_ResultEval

=== 30.10.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction CMM_ResultEval
                    Excutes now also -SubAction BOMCompair
                    After this Update -SubAction BOMCompair is NOT anymore needet please check Script's

=== 30.10.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction FinalResultEval
                    Excutes now also -SubAction BOMCompair
                    After this Update Process BOM eXtract for JobData1ToProcess is needet before running -SubAction finalChk_ResultEval

=== 24.10.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: RfInputList_cls und RfInputListItem_cls eingeführt, 
                    um Item und Revision in der Inputliste miteinander zu vergleichen
                    verhindert, dass doppelte cli namen mit einem anderen Trennzeichen in der Inputliste auftauchen

=== 23.10.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: If in JobControle Rule DS_of_IR was used with IncObjTypes then
                    include objects was not added to JobPacket.
                    Issue is now solved by code changes

=== 17.10.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: to view file content via JobLink faild in case that path to file containd in JobLogFiles was to long.
                    Issue is now solved via code changes.

=== 15.09.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: JobControlRules extendet
                    Now it is posible to define in JobControlRules
                    to add 'IR' (or and) 'ITEM' data additional to the JobData.
                    
                    If you activate this Rule then additional to the selected JobData
                    also 'IR' (or and) 'ITEM' DATA are addet to JobData1ToProcess.xml
                    
                    #Example: Use this rule
                    if Job Selection is based on Datasets but also IR or ITEM Data is needet in the Job.
                    
                    #Doc Info:
                    Please notice if rule is activated also Process Status is set to
                    additional selected Data.

=== 03.09.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 

=== 03.09.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: Performance to read and display Object data in register Objects List 
                    is improved
                     - via Sql 
                       and 
                     - Methodes to displaying the data in Objects datagrid.

=== 14.08.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Base Import Default Conditions changed 
                    
                    ImportAssembMaxLev   from 20    to 30     Levels
                    IImportAssembMaxComp from 25000 to 250000 Component's

=== 14.08.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: TaskScheduler Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: TaskScheduler extendet now you can define ReDo intervalls in TimeScheduler colume.
                    #Doc: ReDo times are in seconds #Example: 10min * 60sec/min = 600sec
                     #Example: [WD=* TP=05:00] [WD=* TS=07:00-18:00 ReDo=600] [WD=* TS=18:00-05:00 ReDo=3600]
                                                |-> every Day betw. 07:00-18:00 ReDo every 10 min the defined Job.

=== 11.08.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Data Model extendet: Now you can use Customer defined Attibutes.
                    
                    In Site definitions you can define settings for extracting 
                    Customer Attributes from TC.DB into JobMgr.DB.
                    
                    Use example:
                    Reading Data from IR's Forms Attributes and import it into JobMgr.

=== 11.08.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ProcessGroups Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: Doc: 
 - Description....: JobServer: Number of ProcessGroups increased to 20.
                    
                    Solving Issue: In somme cases changes on Process Groups was not saved to database. 
                    Bevor this change it was needet to reload Process Group settings befor edit settings.
                    Issue is now solved by code changes.

=== 30.07.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: Data Import Assembly-BOM analyse improved:
                       
                     - Performance improved on reading BOM data from TC
                       by Grouping same BOM Lines into one BOM Line + reciving N.Counting 
                       
                     - Performance improved by using cashing BOMLine data during import.
                       With this change any already readed Data is not needet to 
                       read again from TC Database.
                       
                     - BOM Unique Components now also analysed  
                       Now you can see how many 'Unique components' is contained in an assembly
                       see data in Register: Objects Lists colume 'O.AP.Unique'
                    
                     First test on testsystems of addPLM shows performance improvments from 40% - 60%

=== 21.07.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: CheckBox Extract contains in section [JC:] details about termination reason.
                    #Example: [JC:ERR Terminated:runtime limit of 7200 seconds reached]

=== 18.07.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Type...........: Change: 
 - Description....: Option ImportTcApBomLineUgGometryNo_DoCount removed 
                    This Option defined: 'Not to count BOM Lines having UGGeometrie NO occurences'
                    Option was removed because no customer is using this.

=== 17.07.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action "CBTools_2012_05" -SubAction "CBMoveCBFilesToCBArchiv"
                    NX.sylog Analyse Extendet with new Section: NX.Syslog
                    if NX.Syslog contains on end 'replaced with' then
                     P.Res.Code  = NXSyslog-901 
                     P.Res.MSG  += [NX.Syslog:ERR NX.Syslog contains on end 'replaced with']

=== 09.07.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2258
 - Description....: Subaction 'BOMCompair' in MigIdeas2NX_2013_10
                    Compairs BOM contend between 'Pre CMM' to 'Post CMM'  
                    key                 meaning                                                 ERR Result Code  
                    XmlPre              extracted BOM xml file pre cmm process         (OK/ERR) BOM-101      
                    XmlPost             extracted BOM xml file post cmm process        (OK/ERR) BOM-102      
                    BH-IR               BOM header: OK if Item Revision is matching    (OK/ERR) BOM-110      
                    BH-PS               BOM header: OK if BOM's is still Presice       (OK/ERR) BOM-111      
                    BH-BLPre            if BOM lines in pre BOM is missing in post BOM (OK/ERR) BOM-113      
                                        in this case a BOM Line is not nexisting 
                                        anymore after CMM
                    BH-LC               BOM header: BOM lines count (pre:n<->post:n)   (is MSG) 0    
                    BH-BLPost           BOM lines in post BOM missing in pre BOM       (is MSG) 0    
                                        in this case a BOM Line is added new after CMM 
                    BL-OcNs:ItemRev     BOM line: occurence notes                      (is MSG) 0    
                    BL-SqNr:ItemRev     BOM line: sequence number                      (is MSG) 0

=== 30.06.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "RefileTC_2012_01" -SubAction "extract"
                    Refile input list will now be written with:
                    Encoding: System.Text.Encoding.GetEncoding(1252)

=== 30.06.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "RefileTC_2012_01" -SubAction "EXTRACT"
                    If Refile JobData contained only Nonmaster Object of IR then IR was not addet to 'RfInput list'
                    Issue is now solved by code changes

=== 30.06.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "RefileTC_2012_01" -SubAction "EVALUATE"
                    Evaluation of Refile results did not worked correct
                    if JobData contained national letters like ÄÖÜ äöü
                    Issue is now solved by code changes
                    
                    #Doc: Problem was soleved by reading Textfile content 
                          with Encoding: System.Text.Encoding.GetEncoding(1252)

=== 26.06.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Action: -MigCmm3D2NX_2013_10 SubAction: -Status_final_ResultEval
                    In case evaluation of having wrong Status after prosessing set final status
                    Objects has been Returned with P.Res.State:D.WRN
                    
                    Now Result returns:
                     P.Res.State: D.ERR
                     P.Res.Msg..: [final:ERR][Status.Cmm3D:ERR:is wrong:Locked][NxObj:OK: NX.Dataset exist]

=== 26.06.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Action: -MigCmm3D2NX_2013_10 SubAction: -Status_final_ResultEval
                    In case evaluation of having wrong Status after prosessing set final status
                    Objects has been Returned with P.Res.State:D.WRN
                    
                    Now Result returns:
                     P.Res.State: D.ERR
                     P.Res.Msg..: [final:ERR][Status.Cmm3D:ERR:is wrong:Locked][NxObj:OK: NX.Dataset exist]

=== 26.06.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: If JobData is printet folowing extensions has been Done: 
                    - now you can see if printet are the content of
                        JobData1ToProcess.xml
                        JobData2Result.xml
                    
                    - now if JobResult has ProcessResultExtendedData then 
                      ProcessResultExtendedData is printed in a second line

=== 17.06.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Action: -MigCmm3D2NX_2013_10 SubAction: -InitalResultsEval 
                    In case that no correspondending Dataset containd in Extracted Tc Data was not found in JobManager.JobData1ToProcess 
                    then an MessageBox with message: "hier" comes up.
                    Solution:
                    MessageBox is replaced by a message in command windows:
                    ERR: for extracted Tc Dataset:[#ObjectCliNameCompactInfoForOutput#] no correspondending Dataset found in JobData1ToProcess.
                    ERR:  |-> results are useless and will be ignored.
                    Problem is now solved.

=== 17.06.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction finalChk_ResultEval
                    If Dataset names of a migrated NX Dataset was longer then 32 chars 
                    then the correspondending NX - Ideas or ProE Dataset did not matched. 
                    Out of this reason JobMgr always returned that the NX Dataset did not exist.
                    Problem is now solved by code changes.

=== 17.06.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Action: -MigCmm3D2NX_2013_10 SubAction: -InitalResultsEval 
                    In case that no correspondending Dataset containd in Extracted Tc Data was not found in JobManager.JobData1ToProcess 
                    then an MessageBox with message: "hier" comes up.
                    Solution:
                    MessageBox is replaced by a message in command windows:
                    ERR: for extracted Tc Dataset:[#ObjectCliNameCompactInfoForOutput#] no correspondending Dataset found in JobData1ToProcess.
                    ERR:  |-> results are useless and will be ignored.
                    Problem is now solved.

=== 17.06.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction finalChk_ResultEval
                    If Dataset names of a migrated NX Dataset was longer then 32 chars 
                    then the correspondending NX - Ideas or ProE Dataset did not matched. 
                    Out of this reason JobMgr always returned that the NX Dataset did not exist.
                    Problem is now solved by code changes.

=== 12.06.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Deleting JobControl Rules Dit not worked in all cases.
                    Problem is now solved by code changes

=== 11.06.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: CheckBox Config Parameter : 'CBDurationsAnalyse'
                    If true, the duration for load, update, extract and the entire duration of the cb extract of each part file will be parsed and the result will be printed into P.Res.Msg.Ext.Data

=== 06.06.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: Install and Setup 
 - Type...........: New: 
 - Description....: Database Settings insert, to create the database via PLMPerformance Analyse

=== 09.05.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "RefileTC_2012_01" -SubAction "EVALUATE"
                    Rf.NX.Syslog do not sets P.Res.Has.WRN = 'true' anymore

=== 09.05.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: MigIdeas2NX_2013_10.CMM_ResultEval 
                    Issue P.ResMsg contains wrong Message [CMM:DoExecute:YES..(!but is not yet done!)][..]
                    is now fixed.
                    Description of solution:
                    If in *_cmm.log section for Dataset is found then
                    P.ResMsg = '[CMM:DoExecute:YES]' ... 
                    If in *_cmm.log section for Dataset is !-NOT-! found then
                    P.ResMsg = '[CMM:DoExecute:NO]' ...

=== 28.04.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JCT 
 - Issue..........: JobMgr.Issue-2246
 - Description....: SubAction "JTUpdateLogFileEval" in Action "NxDataProcessing_2013_09" log file parsing for jt update in teamcenter
                    Parameters:
                    -Action       "NxDataProcessing_2013_09" 
                    -SubAction    "JTUpdateLogFileEval"        analyses the jt process logfiles
                    -JobRoot_DP   "#JobRoot_DP#"               JobRoot Directory
                    -LogFilesDir  "#JobRoot_DP#\JtTCUpdate"    path to the directory where the jt_log are

=== 28.04.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2246
 - Description....: Subaction "JTUpdateInputListGen" in "NxDataProcessing_2013_09" for input list generation for jt update in teamcenter
                    Parameters:
                    -Action                "NxDataProcessing_2013_09" 
                    -SubAction             "JTUpdateInputListGen"       generates the input list to extract jt files
                    -JobRoot_DP            "#JobRoot_DP#"               JobRoot Directory
                    -ObjectList_SP_DPNE    "c:\list_sp.txt"             path and name of the list for the single parts
                    -ObjectList_AP_DPNE    "c:\list_ap.txt"             path and name of the list for the assembly parts

=== 28.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Settings JCT 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Change: 
 - Description....: if using -SubAction "CMM_InpListGen" with -force switch 
                    then folowing rules are active:
                    
                    forces all datasets to be included in 'Status_final_InpList'
                      1. even if: BomView analyse returns false
                    
                    forces all datasets to be included in 'Cmm_InpList'
                      1. even if: BomView analyse returns false
                      2. even if: corresponding NX Dataset exist
                      3. even if: cmmStatus is not OK

=== 28.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Settings JCT 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Change: 
 - Description....: if using -SubAction "CMM_InpListGen" with -force switch 
                    then folowing rules are active:
                    
                    forces all datasets to be included in 'Status_final_InpList'
                      1. even if: BomView analyse returns false
                    
                    forces all datasets to be included in 'Cmm_InpList'
                      1. even if: BomView analyse returns false
                      2. even if: corresponding NX Dataset exist
                      3. even if: cmmStatus is not OK

=== 28.04.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-1145
 - Description....: Parameter: -objectType for JobDataExtract                                     
                    only objects with the given object type will be extracted, separated with ';' #Exa: (UGMASTER;UGPART)

=== 25.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-2249
 - Description....: Dataset List contains now new colume O.FS_LastModDate
                    This colume contains the last modification date of file object.
                    The file object is the last version in the named reference of Dataset.

=== 22.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: the folowing new variables can be used to get dir where CustomTcSQL are stored into 
                     - #TcSQL_JS_DP# or #TcSQL_DP# can be used to point to Dir: ..\01-BinServer.Custom\_CustomTcSQL\#TcSiteId#
                     - #TcSQL_JC_DP#               can be used to point to Dir: ..\02-BinClient.Custom\_CustomTcSQL\#TcSiteId#

=== 22.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: CMM Result Evaluation checks now if in 'Named Refrences' of NX-Dataset
                    is an NX-Partfile referenced.
                    P.Msg: [NxObj:ERR:NX.Dataset(UgPart) exist but:ERR_301_DataSetIsMissingFileObject]

=== 22.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: CMM Result Evaluation checks now if in 'Named Refrences' of NX-Dataset
                    is an NX-Partfile referenced.
                    P.Msg: [NxObj:ERR:NX.Dataset(UgMaster) exist but:ERR_301_DataSetIsMissingFileObject]

=== 22.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: CMM Result Evaluation checks now if in 'Named Refrences' of NX-Dataset
                    is an NX-Partfile referenced.
                    P.Msg: [NxObj:ERR:NX.Dataset(UgPart) exist but:ERR_301_DataSetIsMissingFileObject]

=== 22.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: CMM Result Evaluation checks now if in 'Named Refrences' of NX-Dataset
                    is an NX-Partfile referenced.
                    P.Msg: [NxObj:ERR:NX.Dataset(UgMaster) exist but:ERR_301_DataSetIsMissingFileObject]

=== 16.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Type...........: New: 
 - Description....: JobControl Rules is extendet 
                    Now you can define in JobComputers Object selection rules for Volume and Group
                    If JobComputers.JobR.sel.O.Group <> '' then this value replaces value defined in JobControlRule.sel.O.Group 
                    If JobComputers.JobR.sel.O.Vol <> '' then this value replaces value defined in JobControlRule.sel.O.Vol

=== 16.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Filtering of JobControl Rules via JC.J.Rule.filter by:'J.JobName'
                    is now working correct.

=== 10.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-2239
 - Description....: Import of Data from TC Database was not working if TC.Database is a MSSql Server 
                    Problem is now solved

=== 10.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-2240
 - Description....: JobServer nativ data import stopted with NullReferenceException
                    Problem is now solved

=== 02.04.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: TaskScheduler 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-2231
 - Description....: Problem: Tasksheduler Redoes Job's in wrong intervals
                    Issue is now solved by code changes in JobServer and JFProgLib.dll.

=== 24.03.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Type...........: New: 
 - Description....: During import JobResults only needed files are expanted from JobLog.zip files
                    SearchNames are:
                     - *Result.xml
                     - *ToProcess.xml
                     - *PostAction.xml (#New: 2.1210;01.12.2014;J.Fes)
                     - *info.xml
                     - *.syslog
                     - *RunAfterImportOnJobServer.*
                     - *_JobResultsGenericV1.Log  (#New: 2.1210;28.01.2015;J.Fes)

=== 20.03.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Changes on List of Dataset view 
                    New Colume: Ir.Rel.State 
                    New Colume: Ir.Rel.Date

=== 20.03.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Changes on List of Dataset view 
                    Ren Colume: O.Rel.State.Date renamed to O.Rel.Date

=== 14.03.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-1213
 - Description....: SubAction CheckMateLogFileEval for Action LongTermArchivement_2014_02
                    Analyse a Check Mate xml file for an Object and sets the status

=== 07.03.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Print of JobResults now colores result date depending on ResultCode
                    If ResultCode =  '0'  --> Result is printed in green color
                    If ResultCode <> '0'  --> Result is printed in red color

=== 27.02.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Type...........: New: 
 - Description....: JobControl -> JobComputer settings extendet
                    Now you can set for JobComputer's a JobRule.Name filter that defines 
                    who of the Rules are be used by this JobComputer
                    Please look at: JobControl -> JobComputer -> New Colume: [J.Rule.filter by:'J.JobName']

=== 27.02.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: PartUpdate Process Group includes now only that Datasets Types of IR-'UGMaster' 
                    that are selected in JobControl Rule.
                    please look settings in JobControl Rules of P.Rf
                     Tab: 'Job Definition' -> sel:O.Special: 'DS.all OF IR' -> Incl.O.Type(s)

=== 26.02.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-1214
 - Description....: SubAction StepLogFileEval for Action LongTermArchivement_2014_02
                    Analyse a Step log file for an Object and sets the status

=== 26.02.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Reports 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-1181
 - Description....: New Report: Report_305_List_of_all_happend_errors_GroupBy_Type_For_All_Sites avilable
                    
                    #Doc: This Report lists all happend Errors of all Sites with following Data Columes:
                    O.S.Or.Rep Object.: 1-SO (SiteObj)
                    O.Nx.Type.........: AP
                    O.Type............: UGMASTER
                    P.Res.Code........: 940007
                    P.Res.Msg.........: ERROR Message
                    R.Error.Count.....: 2

=== 26.02.2014 ============================================================================
 - Version........: 2.1210 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-1219
 - Description....: SubAction MoveToArchive for Action LongTermArchivement_2014_02
                    moves or deletes specified files to/from the archive
                    protocoles every single step in an archive log file

=== 07.02.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: In special case syntax of CBExtract.csv file contains unexpected New Lines.
                    New Parser is now correcting this problem.
                    
                    #Example:
                    ---------
                    Readet File Content:
                    ObjectCLI;ResultCode;ResultMsg;xml_filename
                    @DB/CB_TEST_AP01/A;949982;
                    NX License Error:  License server system does not support this feature. [ -18 ]
                    [2547];C:\Temp\JobClient\Tc83_CB1_ExtrNx75_00199_CustomerNameShort\JobTemp\CB_TEST_AP01_A_master.xml
                    
                    Parsed File Content:
                    ObjectCLI;ResultCode;ResultMsg;xml_filename
                    @DB/CB_TEST_AP01/A;949982;NX License Error:  License server system does not support this feature. [ -18 ][2547];C:\Temp\JobClient\Tc83_CB1_ExtrNx75_00199_CustomerNameShort\JobTemp\CB_TEST_AP01_A_master.xml

=== 05.02.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-1179
 - Description....: ProE add Data Type 
                     ProPrt (ProE-SinglePart)
                     ProAsm (ProE-Assembly)
                     ProDrw (ProE-Drawing)

=== 29.01.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: MigIdeas2NX_2013_10.CMM_ResultEval.CMMProcessesStop extended 
                    Please use Option -LogFile "#Log_DPNE#" to write 
                    ProcessTryKill informations into this File.

=== 29.01.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: MigIdeas2NX_2013_10.CMM_ResultEval.CMMProcessesStop extended 
                    Please use Option -LogFile "#Log_DPNE#" to write 
                    ProcessTryKill informations into this File.

=== 23.01.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "RefileTC_2012_01" -SubAction "extract"
                    In Special cases IR data was not added to 'RfInput list'  
                    Issue is solved by code canges

=== 20.01.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: MigIdeas2NX_2013_10.CMM_ResultEval 
                    P.ResMsg contained doubble Text 'CMMLog:'  
                    #Example: [CMMLog:[CMMLog:..]] 
                    Issue is now solved by code changes

=== 20.01.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: CMM Process Result Evaluation filters now: 
                    from *_cmm.log the filename of TC-Server Process.
                    and parses from this file name the TC-Server PID.
                    #Example:
                    find in _cmm.log file line:
                    ' Teamcenter Log File Name:  E:\TC_Temp\tcserver.exe21a815a7.syslog'
                                                              parsing:|....| 
                                                      Convert.ToInt32('21a8', 16) = 8616 (=TCServer PID) 
                    If Process with the parsed PID exist's then this Process will be stopped. 
                    Thanks to: Waldemar Weber

=== 20.01.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: CMM Process Result Evaluation filters now: 
                    from *_cmm.log the filename of TC-Server Process.
                    and parses from this file name the TC-Server PID.
                    #Example:
                    find in _cmm.log file line:
                    ' Teamcenter Log File Name:  E:\TC_Temp\tcserver.exe21a815a7.syslog'
                                                              parsing:|....| 
                                                      Convert.ToInt32('21a8', 16) = 8616 (=TCServer PID) 
                    If Process with the parsed PID exist's then this Process will be stopped. 
                    Thanks to: Waldemar Weber

=== 10.01.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: During Site DataImport Data of Colume: 'Imp.Data.IrLast.ModDate Start' 
                    It is now ensured that every 120 sec this data is update and saved in JS.Site Data

=== 03.01.2014 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobServer Mode: 'Manuell' Button and function removed.

=== 16.12.2013 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JS JobControler outputs now more details if a JobClient runs in TestMode.
                    Now all Job's that are skippt is reported into message window.

=== 16.12.2013 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -Action "RefileTC_2012_01" -SubAction "EVALUATE"
                    Rf.NX.Syslog reports now: 'Save:NO' 
                    if no save action found for Part.

=== 12.12.2013 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Evaluate refile results via JM.CmdTools is implemented.
                    Parsing of RfNx.syslog is also implemented.
                    
                    Parsing of RfNx.syslog do not changes the ProcessResult Code .
                    
                    Output of Rf.Result Example:
                    P.Res.Msg   [Rf:OK][Rf.NX.Syslog:LoadUp:OK,LoadDisp:OK,Save:OK,SecEnd:OK]
                                 |       |-> Parsed Details from Rf.NX.Syslog file 
                                 |-> Parsed Details from Rf.Log.Files

=== 04.12.2013 ============================================================================
 - Version........: 2.1210 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: With this version Item information is imported to JM.DB if at least one IR of Item contains Datasets.
                    If you activate in Register: Sites/Data Import -> Site -> Register 'Site TC Import Settings 1' 
                    Option: Import 'all' Item Data [x] then all Item Data are imported to JM.DB
                            even if IR of Item do NOT contain any Dataset.

=== 25.11.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction CMM_ResultEval
                    Parsing of cmm logfiles is now integrated.

=== 25.11.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: Reports 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: New Volume Reports avilable:
                     - Report_102_VolumeStatistic_DSType_All   counts in group's Sites, Volumes, Types 
                     - Report_103_VolumeStatistic_DSType_NX    counts in group's Sites, Volumes, only NX DataSets
                     - Report_104_VolumeStatistic_DSType_Ideas counts in group's Sites, Volumes, only Ideas DataSets

=== 25.11.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -Action MigIdeas2NX_2013_10 -SubAction CMM_ResultEval
                    Parsing of cmm logfiles is now integrated.

=== 23.11.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobControl:JobComputers list the Colume "Org.Notice"  
                    is now formated in large text syle. 
                    Now you can add new lines and font is set as courier new (Blockfont).

=== 18.11.2013 ============================================================================
 - Version........: 2.1200 // S.Gueth
 - Categorie......: Settings JCT CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: result classification rules for centre of gravity

=== 18.11.2013 ============================================================================
 - Version........: 2.1200 // S.Gueth
 - Categorie......: Settings JCT CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: Result Classification Rules for volume deviation is now avilable.

=== 18.11.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: In JobServer 'Object-Liste' Register 
                    Object's ID filter Dialog enhanced. This Dialog contains now a new button 
                    to save listed ID's into an file.

=== 13.11.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-1163
 - Description....: Parthitory check redesigned. Now CheckBox check if in both Parthistory's 
                    the last 'save action' was done by the same save version.
                    
                    Also we check now if the Date/Time of Parthistory has a exactly differenc of 0[min] or 60[min]
                    This is required because since NX8.0 we found differnces of exact 60[min] in Date/Time stamp.
                    
                    #Example: see in line 3-5 60[min] diff in line 6-7 0[min] diff.  
                       CheckBox.Data 1:[NX V4.0.4.2]                                        |CheckBox.Data 2:[NX V8.0.3.4]                                         
                       ---------------------------------------------------------------------|----------------------------------------------------------------------
                       CliName.:@DB/041.231.104/C/master/                                   |CliName.:@DB/041.231.104/C/master/                                    
                       PartHis.:~                                                           |PartHis.:93 12 Nov 13 14:57 NT x64 infodba NX 8.0.3.4 - External User~
                     1 PartHis.:92 12 Nov 13 13:44 NT Intel infodba NX 4.0.4.2 - External U~|PartHis.:92 27 Jun 13 12:07 NT x64 infodba NX 8.0.3.4 (NX Manager ref~
                     2 PartHis.:91 16 Apr 13 03:33 NT Intel infodba NX 4.0.4.2 (NX Manager ~|PartHis.:91 16 Apr 13 04:33 NT Intel infodba NX 4.0.4.2 (NX Manager r~
                     3 PartHis.:90 18 Apr 12 23:47 NT Intel nethh NX 4.0.4.2                |PartHis.:90 19 Apr 12 00:47 NT Intel nethh NX 4.0.4.2                 
                     4 PartHis.:89 20 Apr 12 10:33 NT Intel nethh NX 4.0.4.2                |PartHis.:89 20 Apr 12 11:33 NT Intel nethh NX 4.0.4.2                 
                     5 PartHis.:88 20 Apr 12 10:31 NT Intel nethh NX 4.0.4.2                |PartHis.:88 20 Apr 12 11:31 NT Intel nethh NX 4.0.4.2                 
                     6 PartHis.:87 02 Feb 09 17:00 NT Intel nethh NX 4.0.4.2                |PartHis.:87 02 Feb 09 17:00 NT Intel nethh NX 4.0.4.2                 
                     7 PartHis.:86 02 Feb 09 10:45 NT Intel sidlerc NX 4.0.4.2              |PartHis.:86 02 Feb 09 10:45 NT Intel sidlerc NX 4.0.4.2

=== 10.11.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-1160
 - Description....: Methode to analyze difference of ModelData.MomentOfInertia is now based on 
                    comparing vector distance beween SolidBodyData1.MomentOfInertia and SolidBodyData2.MomentOfInertia.
                    More Details please refer dokument:
                    file://download.plmjobmanager.com/JobManagerV3/V2-0002-AppResources/90-DATA/CustomerNameShort_SettingsGlobal/10-JobScripts/CheckBox/Documentation.Application/CheckBox_02Analyse_JFES.pdf
                    Page: Model Data: Comparing Moment Of Inertial
                     
                    #Hint: Before MomentOfInertia was analysed by checking XYZ differences.

=== 08.11.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Selection of Objects is now working together with the type of
                    Objects you like to select and view in the JobServer 'Objects List'.
                    
                    JS:'Objects List' -> C.Typ (DS/IR/I)
                    If IR or DS is selected then IR's are the base of the selection
                    If I(tems) selected then from the list the items are parsed 
                    out and his is then the selection base for the items to view.

=== 06.11.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: In JobControl Rules you can now defined for SelObjectsBy_ObjectSpecSelRule 
                    which status the Incl.Object's must have to include them in the JobPacket.
                    Special Rules: If value is '=' or '' then the status is the same as defined in 'sel.O.P.Stat(N,M)' 
                    see: JobControl Rules field:'->Incl.P.Stat:'

=== 05.11.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: New switch -MsgLog_DPNE "#JobRoot_DP#\JCCmdToolMsg_Log.txt"
                    If this paramter is given then all messages printed by JC.CmdTools is appended to the given Message.log file.

=== 03.11.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Data columes of Register 'Objects(DS/IRS)' renamed:
                    
                    Data colume:                 has Caption: 
                    ProcessResultMsg          -> P.Res Msg
                    ProcessResultExtendedData -> P.Res Msg.Ext.Data"
                    ProcessState              -> P.Res State
                    ProcessResultCode         -> P.Res Code
                    ProcessResultHasWarning   -> P.Res Has.WRN
                    ProcessResultLink         -> P.Res Lnk

=== 31.10.2013 ============================================================================
 - Version........: 2.1200 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: CheckBox Settings: define 'moment of inertia' result classifications

=== 30.10.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Object's that has to be Exported can be searched via folowing conditions: 
                    
                    O.Expo.Rec.Date<O.Last.ModDate
                    O.Expo.Rec.Date is empty (Object has no Export Date)
                    O.Expo.Rec is empty      (Object is not Expordet to any Other.Site)

=== 30.10.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Object's can be searched via 
                    - Exported to Site 
                    - Last Export Date

=== 24.10.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-1167
 - Description....: Status 'final InputList' added IR's even if IRs 'i-deas dataset' has NOT a corresponding 'NX Dataset'
                    Problem is now solved.
                    
                    Second Repair: 2.1200;06.11.2013;J.Fes;
                    If TcDataset was not in JobPacket includet the Data was wrong added into the packet
                    Problem is now solved.

=== 24.10.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: New dialog to select Object's via Objects ID's added to JobServer.
                    
                    This dialog shows an large input box to list Item or Ir id's 
                    to filter and view objects in JobServer.
                    
                    Also in this dialog you can now select an input file 
                    where Object id are stored in.

=== 24.10.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-1167
 - Description....: Status 'final InputList' added IR's even if IRs 'i-deas dataset' has NOT a corresponding 'NX Dataset'
                    Problem is now solved.
                    
                    Second Repair: 2.1200;06.11.2013;J.Fes;
                    If TcDataset was not in JobPacket includet the Data was wrong added into the packet
                    Problem is now solved.

=== 16.10.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: Scripting 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Code changes on Class Datasets_and_Irs_cls
                    IrFromSiteID is replaced by ObjectFromSiteID

=== 16.10.2013 ============================================================================
 - Version........: 2.1200 // S.Gueth
 - Categorie......: CheckBox 
 - Type...........: New: 
 - Description....: new parameter: CBConfigXml --> defines the settings file for CBSettingsManager
                     example 1: -CBConfigXml "CBMgrConfig.xml" (relative filename #JobMgr_Root_DP#\02-BinClient\CBMgrConfig.xml)
                     example 2: \\PLMServer\PLMShare\JobManagerV3\02-BinClient\CBMgrConfig.xml (filename with full path)

=== 15.10.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: Change: 
 - Description....: If a Job containd a JobPlaner Object then an Exception 
                    has been issued during creating a new Job. Problem is now fixed by code changes
                    #Doc Info: !!! Update of JobManager Database is required !!!

=== 15.10.2013 ============================================================================
 - Version........: 2.1200 // A.Becker
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-1785
 - Description....: The serialization process is time consuming. When done within the sending process, it has to be finished within the timeout while waiting for the StreamBeginMarker.
                    This change enables the client to send KeepAlive packages to the server while serializing the data.
                    Recommended values for the StreamBeginMarker Timeout are around 5-10 seconds now.

=== 15.10.2013 ============================================================================
 - Version........: 2.1200 // A.Becker
 - Additional Info: UpdDb=No 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-1785
 - Description....: - Serialized byte array can be prepared, a following call of ToByteArray() will be satisfied from the previously generated data.
                     - The serializing and compressing methods are optimized for lower memory usage (avoiding temporary byte array copies, using streaming instead).

=== 10.10.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Description....: JobObject Selection Methode extendet. Now you are able to select 
                    all specific DS Types of IR. Base of IR selection is DS.
                    #Example: all UGMASTER + UPPART  DS of IR. Base selection for IR is UGMASTER Dastaset
                    
                    Update of Database is required

=== 30.09.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Colume: O.ReleaseState renamed to O.Rel.State
                    Colume: O.ReleaseDate  renamed to O.Rel.State.Date

=== 23.09.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-1153
 - Description....: Parsing and compairing Text conatains Symbols is now implemented.
                    For this new conversion Rule is desinged Software now converts for Example: '10$s' to '10<$s>' 
                    behause until ~NX4 Symbols are written in value: '10$s' in newer Versions are written in this Syntax 10<$s>

=== 23.09.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-1152
 - Description....: Option: 'Attr_WithNoRef_AndBlankValue_etimate_as added' to CheckBox
                    Now you can define how to estimate: 
                    defines how to estimate: Attributes that did not find a referenced Attribut (with same Name) and value is Blank 
                     - DiffReport_as_WRN: Differences will be reported as Waring.
                     - DiffReport_as_ERR: Differences will be reported as Error (default).
                     - DiffReport_NO....: Differences will NOT be reported. Nothing will be written to the report file.

=== 19.09.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobProcess Data data stored in JobData1ToProcess.xml file
                    contains now: <ir_puid> Data
                    - if an Dataset is selected ir.pruid is filled in
                    - if an Ir is selected Item.puid is filled in
                    - if an Item is selected ir_puid is filled in
                    
                    #Example section from JobData1ToProcess.xml file:
                     <ObjectIr>
                       <CharacterKey />
                      <ItemName>55000000023803</ItemName>
                      <Rev>A2</Rev>
                      <ir_puid>w3ANHjmRwD$ZRC</ir_puid>
                      <ObjectFromSiteID>BLND6R</ObjectFromSiteID>
                    </ObjectIr>

=== 13.09.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: Install and Setup 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Type integration of i-deas / IdeasPart / IdeasAssembly / IdeasDrawing

=== 13.09.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Dataset ReleaseState and ReleaseDate was not written to JM.DB Problem is now fixed.

=== 13.09.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: if ObjectFs_SizeBytes is not readed then value is empty

=== 13.09.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: In some cases JobStatus was wrong interpretet.
                    Issue is now fixed by code changes.

=== 13.09.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: JobServer Titel Version info changed to new format
                    Syntax is now: VX.YYYY (Build:DD.MM.YYYY:[Build.Nr])
                    Example:       V2.1200 (Build:12.09.2013:[5])

=== 12.09.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: Admin 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: if an Exception happend then debug information's  
                    contains now sourscode file name and sourcecode line number.
                    With this info we get better information's to fix issues in PLMJobManager Software.

=== 20.08.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Description....: Information about export recordes is now avilable
                    for Items Irs and Datasets

=== 19.08.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 

=== 16.08.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Description....: Import of DataClass 'Item' now avialble

=== 16.08.2013 ============================================================================
 - Version........: 2.1200 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Description....: Import of DataClass 'Item' now avialble

=== 12.08.2013 ============================================================================
 - Version........: 2.1199 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: In Sites/Data colume 'note' is now a multiline cell

=== 09.08.2013 ============================================================================
 - Version........: 2.1199 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobLink support's now direct access to JobLog Files 
                    Therefor a new syntax is desinged: #JobLog_lnk#\JobLog_PP\File_NE
                                                         |           |         |-> File in JobLog
                                                         |           |-> parcial path in JobLog
                                                         |-> definition for use of internal Link to JobLog.zip file

=== 19.07.2013 ============================================================================
 - Version........: 2.1199 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: New Option JobControl.ObjectSpecialSelectRule 'DS.all of IR (TC DataSets)'
                    This Option can be used in JobControl Object Selection to select all Dataset's of Item Revision

=== 17.07.2013 ============================================================================
 - Version........: 2.1199 // J.Fes
 - Categorie......: Settings 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: If settings are updated that relevant for the GUI are now 
                    directly updated.

=== 08.07.2013 ============================================================================
 - Version........: 2.1198 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: function to extract the refile objects into the input lists, seperated by OwningS and replica objects

=== 08.07.2013 ============================================================================
 - Version........: 2.1198 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: function to extract the refile objects into the input lists, seperated by OwningS and replica objects

=== 04.07.2013 ============================================================================
 - Version........: 2.1198 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: if file system is a unix file system now
                    correct path to the volume file is imported

=== 04.07.2013 ============================================================================
 - Version........: 2.1198 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: if file system is a unix file system now
                    correct path to the volume file is imported

=== 03.07.2013 ============================================================================
 - Version........: 2.1198 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: On function Objects (DS/IRS) -> Extra View all Data of Assembly  
                    if more then one IR was requested. Statistic of Bom struture was wrong 
                    because Data of 'components total' and 'components different' was added by eatch analysed IR 
                    Issue is solved by code changes

=== 27.06.2013 ============================================================================
 - Version........: 2.1198 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: If JobClient is in TestMode only JobRules are used that starts with 'T' as P.Status selection criteria.
                    All JobContol.Rules that do !!-NOT-!! starts with P.Status = 'T' are skipped."

=== 27.06.2013 ============================================================================
 - Version........: 2.1198 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: if prepare.exe (TC.VIS) is used for converting .cgm to .tif 
                    and the files are located in UNC pathes then JCT replaces '\\' true '//'
                    Reason is that prepare.exe do handels unc pathes wrong.

=== 24.06.2013 ============================================================================
 - Version........: 2.1198 // J.Fes
 - Categorie......: CommandLineArgs 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: -action IrInfoResolve_2011_06 updated it is now working again

=== 22.06.2013 ============================================================================
 - Version........: 2.1198 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Analyse of Refile extracts now additonal infos from _failed_refiles.log 
                    if more then one Line was written in _failed_refiles.log.  
                    
                    Example: Content of _failed_refiles.log:
                    @DB/66047700/A
                    # Returned error-code: 100000023 - while saving data to Teamcenter:
                    Cannot find related object "IRM" (in "IRM.PLME_string_02") on "???" of class "???" (tag 00000000)
                    
                    P.ResultMsg returns now: 
                    while saving data to Teamcenter: Cannot find related object "IRM" (in "IRM.PLME_string_02") on "???" of class "???" (tag 00000000)

=== 18.06.2013 ============================================================================
 - Version........: 2.1198 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: CB.Extract Data new ProcessResult Section [SAVE:xx] / 'CBExtr-12' added
                    Data are returned if CB option -SaveWorkPart was active during CheckBox data extraction

=== 26.05.2013 ============================================================================
 - Version........: 2.1198 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-1129
 - Description....: If no CB.Results during CB.extraction was written to zzCBExport_Result.csv file then 
                    Evaluation of results have not been proccesed.
                    Issue is now solved by code changes

=== 22.05.2013 ============================================================================
 - Version........: 2.1196 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: New in CheckBox Settings: PPM_Deviation_AsWarning
                    defines the max deviation, until the drawing compare is estimated as a warning, default is 250

=== 21.05.2013 ============================================================================
 - Version........: 2.1198 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Issue..........: JobMgr.Issue-1130
 - Description....: JobResults of GenericJobResultsV2 (JobData2Result.xml) is now imported bevor
                    JobResults of GenericJobResultsV1 (*JobResultsGenericV1.Log) is imported.

=== 16.05.2013 ============================================================================
 - Version........: 2.1198 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Refdata not found was wrong assinged in case if CB1.NXVersion was CB2.NXVersion.
                    Problem is now fixed.

=== 03.05.2013 ============================================================================
 - Version........: 2.1196 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: During manuell TC: IR/DS import JS Checks now 
                    - If IR still contains: 'Dataset' and 'UG FileObject' in named references. 
                    - If no 'UGPART Dataset' and 'UG FileObject' in IR exist then JS removes IR and Dataset's from JM.DB.

=== 19.04.2013 ============================================================================
 - Version........: 2.1196 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-123
 - Description....: CheckBox Settings: CBCmdProgDefs
                    List of all CB Program definitions, which will be executed, if some image files are selected and the compare button is pressed 
                    Extention.: extention of the file, for that the program will be executed
                    CmdProg...: full path to the program file
                    CmdDefDir.: directory in which the program should be executed, you can set this directory in the options with #File_DP#
                    CmdOptions: arguments for the program, the selected files you can set with: #File1_DPNE# #File2_DPNE# #File3_DPNE# ...

=== 18.04.2013 ============================================================================
 - Version........: 2.1196 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-25
 - Description....: After NX.CB extract data now CB.CMD Tools reading form NX.syslog the used
                    NX Version information and transfers this data to
                    process result Colume: 'P.Used.Prg.Vers'
                    Example: P.Used.Prg.Vers......: [Extr.CADv:NX 6.0.2.8 MP13, 21Apr11][Extr.CBv:V2.0.1.5(NX7.5ff)][Extr.CAD.FILEv:NX V4.0.1]

=== 18.04.2013 ============================================================================
 - Version........: 2.1196 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Issue..........: JobMgr.Issue-25
 - Description....: CB.Compair Result now assembels used process version infos and transfers  
                    this data to process result Colume: 'P.Used.Prg.Vers'
                    Example: P.Used.Prg.Vers:
                    [Extr1.CADv:NX V7.5.1.5][Extr1.CBv:V2.0.1.5(NX7.5ff)][Extr1.CAD.FILEv:NX V7.5.1.5]
                      extract 1:|-> Used.NX Ver.   |-> Used.NxCB. Ver                     |-> Vers. of CAD.Files(was last saved)
                    [Extr2.CADv:NX V7.5.1.5][Extr2.CBv:V2.0.1.5(NX7.5ff)][Extr2.CAD.FILEv:NX V7.5.1.5]
                      extract 2:|-> Used.NX Ver.   |-> Used.NxCB. Ver                     |-> Vers. of CAD.Files(was last saved)
                    [Comp.JM.CBCv:V2013-04-21.01]   
                     for CheckBox Compair:|-> Used JobManager CheckBox Compair Version (CBCv)

=== 17.04.2013 ============================================================================
 - Version........: 2.1196 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Tab: 'Sites/Data Import' Colume names renamed  
                    Names are now strutured by group:
                    - Site........: SiteID/Descrption
                    - IContr......: settings for Import Control like: 'DateModBegin' 'Update force'  
                    - Org-Info....: Org Info's
                    - Setup-DB....: settings for Setup DB access like: DB.Provider (Ora/Mssql) .. 
                    - Setup-Imp...: settings for Import Conditions like Setup-Imp:Tc-Prj.Data
                    - Setup-Native: settings for Setup a Native Site definition

=== 16.04.2013 ============================================================================
 - Version........: 2.1196 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: DataShare new parameters:
                    -ImportUpdateListDir_DP
                    -TCSiteId
                    if they are set, the ImportUpdateList txt file 
                    for successfully processed items will be created

=== 11.04.2013 ============================================================================
 - Version........: 2.1196 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Analysing of text containing relationships improved.
                    now text containing relations attends replace rule from:'<W@?' to:'<W@' 
                    Example: <W@?RELATIONNAME> to <W@RELATIONNAME>

=== 05.04.2013 ============================================================================
 - Version........: 2.1196 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: Setting Renamed from: ModelBodysCheck_Methode to: 
                    Zeile 2

=== 02.04.2013 ============================================================================
 - Version........: 2.1196 // S.Gueth
 - Categorie......: ObjectJobResults CheckBox 
 - Type...........: New: 
 - Description....: If you click on J.Link and the result file is a valid checkbox result file, 
                    the CbSettingsManager will be opend with the  current result

=== 01.04.2013 ============================================================================
 - Version........: 2.1196 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Type...........: New: 
 - Description....: Import of Project Data for Item / ItemRev / Datasets avilable.

=== 29.03.2013 ============================================================================
 - Version........: 2.1197 // J.Fes
 - Categorie......: Install and Setup CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: In JobServer Settings Mananger JobServer -> Extra -> Setup -> Tab:CheckBox !! is removed !!
                    Please remind:
                    CheckBox settings are now managed with external tool: "91-CheckBox (Settings and Compair Tool)"
                    You can start the new tool via "_JobManager" Toolbar:
                    -  _JobManagerV3 -> 91-TestSystem -> 91-CheckBox (Settings and Compair Tool)
                        --- Or ---
                    -  _JobManagerV3 -> 91-ProdSystem -> 91-CheckBox (Settings and Compair Tool)

=== 29.03.2013 ============================================================================
 - Version........: 2.1196 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: Gitter Variablen erweitert es stehen jetzt folgende Variablen zur verfügung
                    -#JobObjectsN#        = defined Object per Packet for this Job
                    -#JobObjectApSumMax#  = defined max Summe of AP Comp. for this Job

=== 28.03.2013 ============================================================================
 - Version........: 2.1196 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: IssueJobMgr.Issue-110: Problem to find matching text for Entity 25/25 Text's  
                    is now solved

=== 27.03.2013 ============================================================================
 - Version........: 2.1196 // J.Fes
 - Categorie......: ObjectList Settings 
 - Additional Info: Check.Settings 
 - Type...........: Change: 

=== 26.03.2013 ============================================================================
 - Version........: 2.1196 // S.Gueth
 - Categorie......: JCT CheckBox 
 - Type...........: Change: 
 - Description....: if there is no cgm to tif program it displays:
                    [DC:ERR:CgmToTif Conver.Prg (%UGII_BASE_DIR%\NXPLOT\cgm2tiff.exe) Not Found]

=== 25.03.2013 ============================================================================
 - Version........: 2.1195 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: ModelData.SolidBodyCheck Analyse of section PrototyeAnalysis integreted.
                    Now comparing 'SolidBodies' consitensy is avilable

=== 20.03.2013 ============================================================================
 - Version........: 2.1195 // S.Gueth
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: --> errors like MB:SUCCESS where removed, not it is only SUCCESS

=== 20.03.2013 ============================================================================
 - Version........: 2.1195 // S.Gueth
 - Categorie......: JCT 
 - Type...........: Change: 
 - Description....: --> errors like MB:SUCCESS where removed, not it is only SUCCESS

=== 11.03.2013 ============================================================================
 - Version........: 2.1195 // J.Fes
 - Categorie......: JCT CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: All listed EntitisType25 SubTypes  'Ent25.Subtype(#Number#)' 
                    will -!!NOT!!- be compared [Default=List is empty] [Example:6 = UF_draft_crosshatch_subtype]

=== 07.03.2013 ============================================================================
 - Version........: 2.1195 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: SiteData 'DataSync' checks now if ItemId or RevId has changed.
                    If yes data in JM.DB will be updatet.

=== 07.03.2013 ============================================================================
 - Version........: 2.1195 // J.Fes
 - Categorie......: Import Settings 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: It is now possible to use SyncSiteData during sync TC.DB and JM.DB via TaskSheduler task.
                    to use this please add in Task.Job parameter /SyncSiteData=true

=== 04.03.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: CheckBox 
 - Type...........: Change: 
 - Description....: Index was greater then List Index problem fixed.

=== 04.03.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: JCT CheckBox 
 - Type...........: New: 
 - Description....: Section: P.ResultMsg            P.Res.Code
                    P.ERR..: NO CB.Data extracted.: CBExtr-01
                    PL.....: Loading Part.........: CBExtr-02
                    UF.....: Update: All Features.: CBExtr-03
                    UD.....: Update: Drawing views: CBExtr-04
                    PH.....: Part Header Section..: CBExtr-05
                    MD.....: Model Section........: CBExtr-06
                    AS.....: Assembly Section.....: CBExtr-07
                    DR.....: Drawing Section......: CBExtr-08
                    EN.....: Entities Section.....: CBExtr-09
                    CBxml..: write Section........: CBExtr-10
                    CGM....: Gen CGM File.........: CBExtr-11
                    Save...: Save Part............: CBExtr-12

=== 04.03.2013 ============================================================================
 - Version........: 2.1194 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: - If using for TextCompairMethod = RemoveLeadingTrailingZeros.
                      Rule Results will be add to PartInfo section 
                    - If using for TextCompairMethod = AsText
                      Rule Results will be add to Ent25/Ent26 section

=== 04.03.2013 ============================================================================
 - Version........: 2.1194 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Description....: Change: If Txt.LTZ then 'Leading or Trailing Zeros' in Entity25 or Entity26 Text is found
                    then Information is now add to section:[PI] Part Information."

=== 04.03.2013 ============================================================================
 - Version........: 2.1194 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: see CheckBox.settings.DebugDetailsToCheckBoxCompairReport
                    - if Value True:add Debugs to CheckBox Compair-Report
                    - if Value False:NO Debugs in CheckBox Compair-Report
                    - Default Value=False

=== 04.03.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: Neue Klassen CmdOutputParseObjects_cls und CmdOutputParseObject_cls, zum Parsen für das Data Share Output log

=== 04.03.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: sub ParseDataShareCmdOutputLogFile: to parse the cmd output logfile after the datashare process

=== 01.03.2013 ============================================================================
 - Version........: 2.1194 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Change: 
 - Description....: Now eatch TextBlock ist checked.
                    LTZeros compensating is implementet.
                    LTZeros = Leading / Traling Zeros compensating during comparing text.

=== 25.02.2013 ============================================================================
 - Version........: 2.1194 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: TextCompair Entity 25 + 26 Information Text #CompRefId_ReplByJMCB# Removed

=== 19.02.2013 ============================================================================
 - Version........: 2.1194 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: In Custom Process Status definitions you are
                    now able to define custom results for:
                    [P.ResCode=??] [P.ResMsg=??] [P.ResWarn=1/0] [P.ResLink=Info..]

=== 19.02.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: -Action 'TcDataSync_2012_02' wurde in 'TcMultiSite_2012_12' umbenannt

=== 19.02.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: JCT 
 - Type...........: New: 
 - Description....: SubAction of 'TcMultiSite_2012_02' eingefÃ¼gt

=== 18.02.2013 ============================================================================
 - Version........: 2.1194 // J.Fes
 - Categorie......: GUI ObjectList Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: In JobServer Settings you can define
                    if Datarows of Multisite/Replica Objects 
                    listet in Register: 'Objects List' datagrid will be colored.

=== 15.02.2013 ============================================================================
 - Version........: 2.1194 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: If JobClient is running in 'Debug' or 'Test' or 'DebugTest' Mode only '1' Job will be send to JobClient.
                    This special rule prevents that during testings the user will be disturbed by getting other new Jobs.

=== 14.02.2013 ============================================================================
 - Version........: 2.1194 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Datagrid filter cell backcolor is set to gold if a filter value is aktive.

=== 08.02.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: New: 
 - Description....: neues CheckBox Setting in Attributen 'Attr_value_compare_as_number_list' 
                    Die Atrribute werden darauf getestet, ob beide Values in einen Numerischen Wert geparst werden können,
                    wenn das zutrifft, dann werden diese via Double Values verglichen,
                    ansonsten werden diese als via strings verglichen.

=== 05.02.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 

=== 30.01.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: GUI Settings 
 - Additional Info: Check.Settings 
 - Description....: #New: Property: JobServer_WorkInstanceForeColor to set Text fore color of JobServer

=== 30.01.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: CheckBox 
 - Type...........: New: 
 - Description....: neue Paramenter fÃ¼r den Checkboxvergleich, um die Beschreibung
                    im div.txt File anzupassen, wenn 2 Verschiedene Teile verglichen werden 
                    Cb1DescShort, Cb1DescFull, Cb2DescShort, Cb2DescFull, CbReportDesc

=== 28.01.2013 ============================================================================
 - Version........: 2.1194 // J.Fes
 - Categorie......: JCT 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: -RecToAdd -RecCcAdd -RecBcAdd accepts user list
                    Example: Firstname1.Name1@Company.com##Firstname1 Name1Firstname2.Name2@Company.com##Firstname2 Name2

=== 23.01.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: GUI 
 - Type...........: New: 
 - Description....: New Key-Action for JobClient: B = Break current JobServer connection

=== 22.01.2013 ============================================================================
 - Version........: 2.1194 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: if refile result file is not found Result is estimatet as R.Code=64 and R.Msg='Refiled Part File not found'

=== 22.01.2013 ============================================================================
 - Version........: 2.1194 // S.Gueth
 - Categorie......: CheckBox 
 - Description....: Result message for evaluating the CBExtract log has been adjusted.
                    Example: "[PH:OK][MD:WRN:CB (NO error text found for error 96)][AS:OK][DR:OK][EN:OK]"
                    WRN is output if the section is completed but contains an error,
                    or if the section contains an error and the CB.xml is still written correctly
                    could be written correctly.
                    ERR is output if the section was not completed correctly and
                    the CB.xml could not be written correctly.
                    If a section does not exist, it is not output.

=== 22.01.2013 ============================================================================
 - Version........: 2.1193 // S.Gueth
 - Categorie......: CheckBox 
 - Type...........: Change: 
 - Description....: Ausgabeformat der Short Message wurde geÃ¤ndert: vorher: [MD:8 Msg:ERR:Vol] jetzt: [MD:ERR:Vol] 
                    Beispiel: [PH:OK][MD:ERR:Vol][AS:OK][DR:OK][EN25:OK][EN26:OK][DC:not.Proc][PF:OK][PI:WRN:MD:Density=0]
                                Get
                                    '.Substring(Me.NameShort.Length)
                                    If Me.ResultCode = 0 Then
                                        Return [ + Me.SectionMain.NameShort + : + Me.ResultMsgShort + ]
                                    Else
                                        Return [ + Me.SectionMain.NameShort + : + Me.ResultMsgShort + ]
                                    End If
                                End Get
                            End Property
                    
                            Public Property ResultCode() As String
                            Public Property ResultCodeBinary() As Long
                            Public Property SectionMain() As New CheckBoxSections.Section_cls(, , 0)
                            Public Property SectionSub() As New CheckBoxSections.Section_cls(, , 0)
                    
                    
                            ''' <summary>
                            ''' gibt das Aggregierte Ergebniss in kurzform zurÃ¼ck 
                            '''  #Example:[PH:OK][MD:OK][AS:OK][DR:OK][Pef:OK][PPM:OK]
                            ''' </summary>
                            ''' <value></value>
                            Public Property ResultMsgShort() As String
                                Get
                                    Dim ResMsgReturn As String = 
                                    ' wenn mehrere Meldungen vorliegen dann diese anhÃ¤ngen
                                    ' ApplDokuIntern: 2.068205.09.2010J.Fesangepasst so das jetzt auch kurz infos zu sehen sind

=== 22.01.2013 ============================================================================
 - Version........: 2.1193 // S.Gueth
 - Categorie......: CheckBox 
 - Type...........: New: 
 - Description....: In Checkboxsettings wurde die Option 'Density_is_0_AsErr' hinzugefügt. Diese gibt an, ob eine density = 0 als Fehler oder als Warnung gewertet werden soll. (Default is Fehler)

=== 21.01.2013 ============================================================================
 - Version........: 2.1193 // S.Gueth
 - Categorie......: CheckBox 
 - Type...........: New: 
 - Description....: Section Part Information eingefÃ¼hrt

=== 15.01.2013 ============================================================================
 - Version........: 2.1193 // J.Fes
 - Type...........: New: 
 - Description....: In den settings kÃ¶nnen jetzt die Pfade zu den OracleClientBin_Path Verzeichnissen angegeben werden.

=== 18.12.2012 ============================================================================
 - Version........: 2.1189 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 

=== 18.12.2012 ============================================================================
 - Version........: 2.1190 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: #New: Unterscheidung der Entity eingefÃ¼hrt fÃ¼r:
                     -EN25: 'Entity Data 25:Drafting'
                     -EN26: 'Entity Data 26:Dimensions'

=== 14.12.2012 ============================================================================
 - Version........: 2.1185 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: - Example 1: NX8:'<W!123921@VWNAME>' ->  bis NX7.5:'<W@VWNAME>'
                    - Example 2: NX8:'<WID1*0@DB_PART_NO>' -> NX6:'<W@DB_PART_NO>'
                      This adjustment ensures that texts contain references. 
                      and can be compared with versions <=NX7.5 and

=== 02.12.2012 ============================================================================
 - Version........: 2.1176 // S.Gueth
 - Categorie......: JobControl 
 - Type...........: New: 
 - Description....: </remarks>

=== 24.11.2012 ============================================================================
 - Version........: 2.1169 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: Entities 25 UG_Darfting comparing added to CheckBox Compair.

=== 24.11.2012 ============================================================================
 - Version........: 2.1169 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: CheckBox Report contains now section lines. This lines helps to get better overview in CB Report File.

=== 24.11.2012 ============================================================================
 - Version........: 2.1169 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Description....: #Change: if Drawing Compair was not processed short value is: not.Proc"

=== 20.11.2012 ============================================================================
 - Version........: 2.1166 // J.Fes
 - Categorie......: JobControl 
 - Type...........: New: 
 - Description....: CB_GeometricCompare_cls</remarks>

=== 15.11.2012 ============================================================================
 - Version........: 2.1162 // J.Fes
 - Categorie......: Settings CheckBox 
 - Type...........: New: 
 - Description....: in CheckBox Settings you can disable the Check Of ViewAnchorPoints

=== 14.11.2012 ============================================================================
 - Version........: 2.1159 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: Methode CLAs_Obj.TifMergCopyToTifMergCollectionIfPPMgt Avilable"

=== 14.11.2012 ============================================================================
 - Version........: 2.1159 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: Methode CLAs_Obj.TifMergCopyToTifMergCollectionIfPPMgt Avilable

=== 14.11.2012 ============================================================================
 - Version........: 2.1159 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: UpdDb=No Ver.Info 
 - Type...........: New: 
 - Description....: funtion to read CheckBox Results from CheckBox LogFile

=== 09.11.2012 ============================================================================
 - Version........: 2.1154 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Checking if Resets containing a valid volume.

=== 02.11.2012 ============================================================================
 - Version........: 2.1149 // J.Fes
 - Categorie......: Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: Check:'ObjectsWire_n' disablet by default (Result of CB.Meeting 6.11.2012)"

=== 02.11.2012 ============================================================================
 - Version........: 2.1149 // J.Fes
 - Categorie......: Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: "Check:'LayerObjects_n' disablet by default (Result of CB.Meeting 6.11.2012)"

=== 02.11.2012 ============================================================================
 - Version........: 2.1149 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Description....: Check.Settings;"Check:'ViewDependentObj' disablet by default (Result of CB.Meeting 6.11.2012)"

=== 31.10.2012 ============================================================================
 - Version........: 2.1145 // S.Gueth
 - Type...........: New: Change: 
 - Description....: 2.118511.12.2012S.Gueth: #Change: added clip funktionality if the tif size is different

=== 31.10.2012 ============================================================================
 - Version........: 2.1145 // S.Gueth
 - Categorie......: JobControl 
 - Type...........: New: 
 - Description....: sub CutTifIfDifferent</remarks>
                            Public Sub CutTifIfDifferent(ByVal Tif1_DPNE As String, ByVal Tif2_DPNE As String)
                                'Dim Tif1_DPNE As String = C:\Users\Sascha\Desktop\zzCBMoveToArchiv_csvlog\300569403SHF044-001.FHZ01.B1F8L_----_master_300569403SHF044-001_----_SH01_#CB6R - Kopie.tif
                                'Dim Tif2_DPNE As String = C:\Users\Sascha\Desktop\zzCBMoveToArchiv_csvlog\300569403SHF044-001.FHZ01.B1F8L_----_master_300569403SHF044-001_----_SH01_#CB8F - Kopie.tif
                    
                                Dim tif1 As System.Drawing.Image
                                Using Str As System.IO.Stream = System.IO.File.OpenRead(Tif1_DPNE)
                                    tif1 = System.Drawing.Image.FromStream(Str)
                                End Using
                    
                                Dim tif2 As System.Drawing.Image
                                Using Str As System.IO.Stream = System.IO.File.OpenRead(Tif2_DPNE)
                                    tif2 = System.Drawing.Image.FromStream(Str)
                                End Using
                    
                                Dim difHeight As Int32 = 0
                                Dim difWidth As Int32 = 0
                                Dim tifToResize_DPNE As String = 
                    
                                ' -- prüfen ob Bildhöhe ungleich
                                If tif1.Height <> tif2.Height Then
                                    ' -- tif2 größer als tif 1
                                    If tif2.Height > tif1.Height Then
                                        difHeight = tif2.Height - tif1.Height
                                        difWidth = tif2.Width - tif1.Width
                                        tifToResize_DPNE = Tif2_DPNE
                                        ' -- tif1 größer als tif 2
                                    Else
                                        difHeight = tif1.Height - tif2.Height
                                        difWidth = tif1.Width - tif2.Width
                                        tifToResize_DPNE = Tif1_DPNE
                                    End If
                                End If
                    
                                Dim halfDifHeight As Int32 = CInt(difHeight / 2)
                                Dim halfDifWidth As Int32 = CInt(difWidth / 2)
                    
                                ' --wird ausgeführt wenn tiffs unterschiedlich groß sind
                                If Not tifToResize_DPNE.Equals() Then
                                    Dim tifToResize As System.Drawing.Image
                                    Using str As System.IO.Stream = System.IO.File.OpenRead(tifToResize_DPNE)
                                        tifToResize = System.Drawing.Image.FromStream(str)
                                    End Using
                                    Dim resizedTif As New System.Drawing.Bitmap(tifToResize.Width - difWidth, tifToResize.Height - difHeight)
                                    Using graphic As System.Drawing.Graphics = System.Drawing.Graphics.FromImage(resizedTif)
                                        Dim TargetRect As System.Drawing.Rectangle = New System.Drawing.Rectangle(0, 0, resizedTif.Width, resizedTif.Height)
                                        Dim SourceRect As System.Drawing.Rectangle = New System.Drawing.Rectangle(halfDifWidth, halfDifHeight, tifToResize.Width - halfDifWidth, tifToResize.Height - halfDifHeight)
                                        ' -- Abschneiden der Ränder
                                        graphic.DrawImage(tifToResize, TargetRect, SourceRect, System.Drawing.GraphicsUnit.Pixel)
                                    End Using
                                    System.IO.File.Delete(tifToResize_DPNE)
                                    resizedTif.Save(tifToResize_DPNE)
                                End If
                    
                                '' -- prüfen ob Bildbreite ungleich
                                'If tif1.Width <> tif2.Width Then
                                '    ' -- tif2 breiter als tif 1
                                '    If tif2.Width > tif1.Width Then
                                '        difWidth = tif2.Width - tif1.Width
                                '        ' -- tif1 breiter als tif 2
                                '    Else
                                '        difWidth = tif1.Width - tif2.Width
                                '    End If
                                'End If
                    
                            End Sub
                    
                    
                    
                    #End Region
                    
                        End Class
                    
                        ''' <summary>
                        ''' contains CGM to Tif or CGM to PDF Process results
                        ''' </summary>
                        ''' <remarks> 
                        ''' #New: 3.149121.03.2020J.Fes

=== 31.10.2012 ============================================================================
 - Version........: 2.1145 // S.Gueth
 - Categorie......: JobControl 
 - Type...........: New: 
 - Description....: function GetPPMFromPicture</remarks>

=== 31.10.2012 ============================================================================
 - Version........: 2.1145 // S.Gueth
 - Type...........: New: Doc: 
 - Description....: Stand übernommen in:

=== 29.10.2012 ============================================================================
 - Version........: 2.1141 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Option -JobMgrDataOrg_BaseNameSchema RootPP1_N=CustomPP1_N verfügbar.

=== 12.10.2012 ============================================================================
 - Version........: 2.1131 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: IrCreateDate IrLastModDate + ObjectCreateDate umgestellt von Minuten genau auf Sekunden genau."

=== 12.10.2012 ============================================================================
 - Version........: 2.1131 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: Beim Anlegen von JobRules werden die Daten der JobScripts für JobName + JobDescription automaisch 
                    übernommen wenn zuerst die JobScripts ausgewählt werden und dann gleich die neue JobRule gepeichert wird.
                    Der JobName wird erstellt aus: JobScriptName_0n 
                    
                    Die Speicherung der neuen JobRule wird ausgeführt wenn in eine andere Zeile des Datagrids geklickt wird."

=== 12.10.2012 ============================================================================
 - Version........: 2.1131 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: JobPaket contains only Objektes of diffrent ItemRev.

=== 12.10.2012 ============================================================================
 - Version........: 2.1131 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: JobPaket contains only Objektes of diffrent Items.

=== 12.10.2012 ============================================================================
 - Version........: 2.1131 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: JobPaket size control extendet with selections method:'sel:O.Status'
                    This settings defines selectin definition for Objects with Status #New:[31.10.2011 J.Fes]
                    If Value=empty then this Rule is Inaktive. If Vaule='' (2 >'< Chars)

=== 12.10.2012 ============================================================================
 - Version........: 2.1131 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: Doc: 
 - Description....: If Value>0 then this Rule is aktive

=== 12.10.2012 ============================================================================
 - Version........: 2.1131 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: ProcessTimeStart ProcessTimeEnd umgestellt von Minuten genau auf Sekunden genau. Hierdurch wird jetzt der 'last process' Ergebnis richtig ermittelt.
                    Zuvor ist es vorgekommen das wenn processe inherhalb der selben Minute ein object verarbeitet hat das das vorherige Ergebniss (und nicht das wirklich letzte) als 'last processed' ermittelt wurde.

=== 09.10.2012 ============================================================================
 - Version........: 2.1128 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Change: 
 - Description....: New setting to control LayerObjects_n_DeviationMax.

=== 09.10.2012 ============================================================================
 - Version........: 2.1128 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: Auswertung der Performance Daten können aus und eingeschaltet werden. Default = Aus

=== 18.09.2012 ============================================================================
 - Version........: 2.1124 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: NX8 Refile format of "-out="%RfFailedLog_DPNE%" changed. Old Key 'ERR.Code:' changed to 'error-code:' "

=== 13.09.2012 ============================================================================
 - Version........: 2.1116 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: Compair Checks now with setting: Settings_Obj.TotalFeatures_n_DeviationMax

=== 13.09.2012 ============================================================================
 - Version........: 2.1116 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: Compair Checks now with setting: Settings_Obj.AliveFeatures_n_DeviationMax

=== 30.08.2012 ============================================================================
 - Version........: 2.1114 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 

=== 30.08.2012 ============================================================================
 - Version........: 2.1114 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Names of CheckBox Data Results changed 
                          _3Merge       -> _1Merge

=== 30.08.2012 ============================================================================
 - Version........: 2.1114 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Names of CheckBox Data Results changed _3Merge->_1Merge _1Dif.tif -> _3Dif _2DifHistoDat -> _3DifHistoDat

=== 27.08.2012 ============================================================================
 - Version........: 2.1112 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: new CB Setting:'Refset_Feature3D_n_DeviationMax' defines max deviation until compairing 'Refset.Feature3D_n' is void as a Ok.

=== 27.08.2012 ============================================================================
 - Version........: 2.1112 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: new CB Setting: 'ViewNotes_Dif_AsErr':Defines if ViewNotes diffs are estimated as Error.

=== 27.08.2012 ============================================================================
 - Version........: 2.1112 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: New: 
 - Description....: new CB Setting: defines if 'ViewAnchorX.Y.Z' values not listed in NX8CBData.xml are estimated as Error.

=== 24.08.2012 ============================================================================
 - Version........: 2.1110 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Change: 

=== 20.08.2012 ============================================================================
 - Version........: 2.1105 // A.Becker
 - Categorie......: Scripting 
 - Additional Info: UpdDb=No 
 - Description....: New...: JobServer 'Scripting engine' support now additional Assemblies as References. 
                    Syntax: 'References Assembly.dll

=== 20.08.2012 ============================================================================
 - Version........: 2.1105 // A.Becker
 - Categorie......: Scripting 
 - Additional Info: UpdDb=No 
 - Description....: New:In Scripten können zusätzliche Assemblies als Referenz angegeben werden. 
                     Syntax: 'References Assembly.dll

=== 19.08.2012 ============================================================================
 - Version........: 2.1104 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Change: 
 - Description....: CBCompair_ResultAnalyse creates also tif files if required.

=== 19.08.2012 ============================================================================
 - Version........: 2.1104 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: CBCompair_ResultAnalyse creates also tif files if required.

=== 16.08.2012 ============================================================================
 - Version........: 2.1103 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: Names of CheckBox Data Results changed

=== 19.07.2012 ============================================================================
 - Version........: 2.1086 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Type...........: New: 
 - Description....: Es können jetzt in den JobControl Rules via Extendet Process Controls Definitionen
                    der Status anderer Process Gruppen mit geändert werden.
                    #Syntax.: [RuleID=OK] [O.Type=*] [...] [P0#n#.Stat=#NewStatus#].
                    #Example: [RuleID=OK] [O.Type=*] [J.ResCode=0]  [J.ResMsg=*] [J.ResWarn=0] [P.Stat=D.OK] [P01.Stat=RUN] [P02.Stat=RUN]"

=== 06.07.2012 ============================================================================
 - Version........: 2.1077 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: wird in der Id EingabeBox ein Return eingegben so wird das laden 
                    der Object Daten aus der Datenbank ausgeführt.
                    Es hat den selben Effekt wie das anklicken des Knopf's 'Load List'"

=== 03.07.2012 ============================================================================
 - Version........: 2.1072 // J.Fes
 - Categorie......: Install and Setup DB 
 - Additional Info: Ver.Info 
 - Description....: #Neu: Standard DB Backupverzeichnis eingefügt ..\90-DATA\#Customer#_#WorkInst#\30-DataBase\24-JobServerDbBackup

=== 03.07.2012 ============================================================================
 - Version........: 2.1072 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: Ver.Info 
 - Description....: Neu: der Knopf J.Link verwendet die Ersetzungsregeln die definiert wurden in: ServerSettings.ReplaceRules

=== 21.06.2012 ============================================================================
 - Version........: 2.1060 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Description....: Ã„nderung: CB ResultFiles Trenner geÃ¤ndert von '_' auf '-' Bspl: alt: ug0000036000_NX75_CB3_CB2_Dif_Xml.txt -> ug0000036000_NX75_CB3-CB2_CBDif.txt

=== 01.06.2012 ============================================================================
 - Version........: 2.1048 // J.Fes
 - Additional Info: Ver.Info 
 - Description....: Neuerung: beim dem Versuch den JobClient Computer zu Rebooten ist der JobClient hängen geblieben. Ursache: Down.exe fehlte im .\02-BinClient Verzeichniss. Korrigiert

=== 01.06.2012 ============================================================================
 - Version........: 2.1048 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Wenn im Job kein NX.syslog file enthalten war. 
                    wurde die TcSiteId nicht in allen Fällen korrekt ermittelt korriegiert

=== 05.04.2012 ============================================================================
 - Version........: 2.0987 // J.Fes
 - Categorie......: Scripts/Params. 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: es steht die GitterVariable: #JobLogZipArchiv_DPNE# zur verfügung. Diese kann genutzt werden um z.B. in einer E-Mail auf den JobLogZipArchive File zu verweisen.

=== 05.04.2012 ============================================================================
 - Version........: 2.0987 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Doc: 
 - Description....: Ablagestruktur von 90-DATA\#CustomerNameShort_WorkInst#\10-JobLogArchiv\ reorganiesiert.
                    Die Logfiles werden jetzt in eigene Unterverzeichnisse je JobName abgelegt.
                    Bestehendes 10-JobLogArchiv Verzeichnis inc. aller Logfiles einfach in Unterverzeichniss \10-JobLogArchiv\zz-JobLogArchiv_Until2012-06-08 verschieben.

=== 05.04.2012 ============================================================================
 - Version........: 2.0987 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Type...........: Doc: 
 - Description....: Ablagestruktur von 90-DATA\#CustomerNameShort_WorkInst#\10-JobLogArchiv\ reorganiesiert.
                    Die Logfiles werden jetzt in eigene Unterverzeichnisse je JobName abgelegt.
                    Bestehendes 10-JobLogArchiv Verzeichnis inc. aller Logfiles einfach in Unterverzeichniss \10-JobLogArchiv\zz-JobLogArchiv_Until2012-06-08 verschieben.

=== 03.03.2012 ============================================================================
 - Version........: 2.0974 // J.Fes
 - Categorie......: ObjectList Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: Neuerung: Process State Edit Form überarbeitet"

=== 20.02.2012 ============================================================================
 - Version........: 2.0962 // J.Fes
 - Categorie......: Install and Setup JobControl Scripts/Params. Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: Neuerung: #Root_DP#\03-BinPublic.ClientServer eingeführt.
                     In diesem Verzeichniss befinden sich Tools die von dem JobCLient's und von dem JobServer gleichzeitig verwendet werden.
                    Beispiel: JobManagerCmdTools.exe

=== 19.02.2012 ============================================================================
 - Version........: 2.0961 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: JobLogFiles werden jetzt in Unterverzeichnissen abgelegt 
                    Example: ..\90-DATA\#Customer_WorkInst#\10-JobLogArchiv\#SiteId#_#JobContolName#\#JobName#.zip abgelegt 
                    Jobs die einen Error oder eine Exception währenden des Importvorganges hatten
                    werden in das Verzeichniss ..\90-DATA\#Customer_WorkInst#\10-JobLogArchiv.ImportError\#JobName#.zip abgelegt"

=== 13.02.2012 ============================================================================
 - Version........: 2.0951 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: in JobScriptsNeuerung: wird im JobScript
                     set JobAddFile_JobData1ToProcess_xml=false
                     angegben so wird der File:[JobData1ToProcess_XML] nicht dem JobFile hinzugefuegt.

=== 13.02.2012 ============================================================================
 - Version........: 2.0951 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Check.Settings 
 - Type...........: Change: 
 - Description....: Neuerung: wird im JobScript set JobAddFile_ObjectsProcessData_xml=false
                    angegben so wird der ObjectsProcessData.xml nicht dem JobFile hinzugefuegt."

=== 13.02.2012 ============================================================================
 - Version........: 2.0951 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: in JobScriptsNeuerung: wird im JobScript
                     set JobAddFile_ObjectsListAllDetails_txt=false
                     angegben so wird der File:[#JobName#_ObjectsListAllDetails.txt] nicht dem JobFile hinzugefuegt.

=== 13.02.2012 ============================================================================
 - Version........: 2.0951 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: in JobScriptsNeuerung: wird im JobScript
                     set JobAddFile_ObjectsList_txt=false
                     angegben so wird der File:[#JobName#_ObjectsList.txt] nicht dem JobFile hinzugefuegt.

=== 05.01.2012 ============================================================================
 - Version........: 2.0931 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: SQL Query wird jetzt immer in die InfoSys mit ausgegeben

=== 21.12.2011 ============================================================================
 - Version........: 2.0921 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: Variablen ersetzung #TcSiteId# steht jetzt zur verfügung

=== 19.12.2011 ============================================================================
 - Version........: 2.0920 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Description....: Neuerung: die Objects Daten beinhaltet jetzt den Ir.Type

=== 18.12.2011 ============================================================================
 - Version........: 2.0917 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: Performance Edit Processstatus/Mark.Object verbessert

=== 28.11.2011 ============================================================================
 - Version........: 2.0907 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: es gelten jetzt folgenden Regeln
                    - Wenn ein Process als Me.ProcessResultCode = 0 And Me.ProcessResultHasWarning = false dann ist der P.Stat=D.OK
                    - Wenn ein Process als Me.ProcessResultCode <> 0 dann ist der P.Stat=D.ERR
                    - Wenn ein Process als Me.ProcessResultCode = 0 And Me.ProcessResultHasWarning = true dann ist der P.Stat=D.W

=== 23.11.2011 ============================================================================
 - Version........: 2.0903 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: ProcessProcState extended to 34 characters
                    The process status is now displayed with P. + ProcessName. Example: P.Run.CB1.1
                    Enhancement implemented by code extensions

=== 17.11.2011 ============================================================================
 - Version........: 2.0900 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: Beim arbeiten mit mehrere JobServern Processen wurden empfangene Pakete zwischen den den Jobserver Prozessen von den unterschiedlichen Jobserver Prozessen zufällig verarbeitet.
                    Das wird jetzt dadurch vermieden das jeder Process einen eigenes Empfangsverzeichniss hat:...\90-DATA\CustomerNameShort_WorkInst_TEST\90-JobTemp.BackFromClient\#ComuterName#_P#Protnummer#

=== 17.11.2011 ============================================================================
 - Version........: 2.0901 // J.Fes
 - Categorie......: JobControl 
 - Type...........: New: 
 - Description....: If the D=Debug mode is activated on the JobCLient.
                    then the grid variable:#JobScriptParametersExtended# is automatically 
                    supplemented at the end with the entry 'set JobMgr_Debug=ON'
                    
                    If the T=Test mode is activated on the JobCLient.
                    then the grid variable:#JobScriptParametersExtended# is automatically 
                    supplemented at the end with the entry 'set JobMgr_Test=ON'
                    
                    Enhancement implemented by code extensions

=== 15.11.2011 ============================================================================
 - Version........: 2.0898 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: der process status kann nach ergebniss regeln bestimmt werden.

=== 11.11.2011 ============================================================================
 - Version........: 2.0894 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: F1 Hilfe verfügbar für JobContol.Rules. Edit via JobRule Editor

=== 11.11.2011 ============================================================================
 - Version........: 2.0894 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: F1 Hilfe verfügbar für JobContol.Rules. Edit via JobRule Editor

=== 11.11.2011 ============================================================================
 - Version........: 2.0894 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: Ausgabeformat angepasst

=== 11.11.2011 ============================================================================
 - Version........: 2.0894 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: Ausgabeformat angepasst

=== 11.11.2011 ============================================================================
 - Version........: 2.0894 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: Ausgabeformat angepasst

=== 11.11.2011 ============================================================================
 - Version........: 2.0894 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: F1 Help avilable

=== 08.11.2011 ============================================================================
 - Version........: 2.0890 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Description....: Neuerung:Es können jetzt include Group Filter für den Import von TC.Daten definiert werden. z.B. Können hierdurch nur die Daten die der Gruppe 'Norm' gehören importiert werden.

=== 08.11.2011 ============================================================================
 - Version........: 2.0890 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: die Titelbezeichung geändert von 'Group' auf 'OrgInfo.Group' und von 'Note' auf 'OrgInfo.Note'

=== 31.10.2011 ============================================================================
 - Version........: 2.0886 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Description....: Neuerung: Neue JobControl Regeln eingearbeitet 'sel:O.FsHitCountYN', 'J.Resource.Points', 'J.Res.P.State Value Rule'

=== 31.10.2011 ============================================================================
 - Version........: 2.0886 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Description....: Neuerung: Daten Feld grösse 'J.on Computers' geändert von 128 Zeichen auf 4000 Zeichen

=== 31.10.2011 ============================================================================
 - Version........: 2.0884 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: UpdDb=Yes 
 - Description....: Neuerung Es können jetzt Daten aus unterschiedliche Oracle Datenbanken abgefragt werden ohne zufor die Software neu zu starten.
                    Zuvor war es erforderlich die Software neu zu starten wenn z.B. Daten aus TcDb2 abgerufen werden sollten jedoch zuvor Daten aus TcDb1 abgerufen wurden.

=== 31.10.2011 ============================================================================
 - Version........: 2.0884 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: UpdDb=Yes 
 - Description....: Neuerung Es können jetzt Daten aus unterschiedliche Oracle Datenbanken abgefragt werden ohne zufor die Software neu zu starten.
                    Zuvor war es erforderlich die Software neu zu starten wenn z.B. Daten aus TcDb2 abgerufen werden sollten jedoch zuvor Daten aus TcDb1 abgerufen wurden.

=== 30.10.2011 ============================================================================
 - Version........: 2.0882 // J.Fes
 - Categorie......: Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: "Neu: via settings kann der JobServer_WorkInstanceTitelName eingestellt werden"

=== 30.10.2011 ============================================================================
 - Version........: 2.0883 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: Die Daten in der Spalte O.Nx.Type werden wie folgt eingefärbt:
                    - 'SP' in Gelb 
                    - AP in DodgerBlue

=== 30.10.2011 ============================================================================
 - Version........: 2.0882 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Description....: Check.Settings;Neuerung: im Application Titel wird der wert von JobServer_WorkInstanceTitelName mit angezeigt. 
                    Hierdurch wird die es beim handhaben mit mehreren Umgebungen Übersichtlicher"

=== 27.10.2011 ============================================================================
 - Version........: 2.0880 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Type...........: New: 

=== 26.10.2011 ============================================================================
 - Version........: 2.0879 // J.Fes
 - Categorie......: DB Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: der DBNetworkAlias kann jetzt via Dropdown Schalter ausgewählt werden.
                    Die Namen werden aus dem file tnsnames.ora geparst und angezeigt.
                    Die Datei tnsnames.ora muss jetzt mit ausgewählt werden.

=== 25.10.2011 ============================================================================
 - Version........: 2.0878 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Die Datenzeilen in 'Objects (DS/IRs)' bei Replica(non Owingsite) Objekten werden in Grau-Blau dargestellt.

=== 25.10.2011 ============================================================================
 - Version........: 2.0878 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Die Spalten [ProcStateCol] der Daten in 'Objects (DS/IRs)' werden in abhänikeit von ihrem Wert eingefärbt. Es gelten folgende Regeln:
                    -Wert:N (Hellgrau)
                    -Wert:A (Blau/Weis)
                    -Wert:M (Cyan)
                    -Wert:P (Orange)
                    -Wert:D (Grün)
                    -Wert:X (Rot)
                    -Wert:*.Err (Rot)
                    -Wert:*.Ok (Grün)

=== 25.10.2011 ============================================================================
 - Version........: 2.0878 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Neuerung: Beim klicken auf den Knopf in Search und List 'Objects (DS/IRs)' wird die Processspalte des aktuellen Prozesses automatisch eingblendet falls diese zuvor ausgeblendet war.

=== 24.10.2011 ============================================================================
 - Version........: 2.0875 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Aenderung: Farbsteuerun P.Status = 'M*' die Zelle wird jetzt in leicht dunklerem Cyan dargestellt

=== 24.10.2011 ============================================================================
 - Version........: 2.0875 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Aenderung: Farbsteuerun P.Status = 'M' die Zelle wird jetzt in Cyan dargestellt

=== 13.10.2011 ============================================================================
 - Version........: 2.0869 // A.Becker
 - Additional Info: UpdDb=No 
 - Type...........: New: 
 - Description....: Multiple files can be transferred from JobClient per job

=== 19.09.2011 ============================================================================
 - Version........: 2.0849 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Type...........: Doc: 
 - Description....: Assembly ReferenceComponent (nur zur reference) wird jetzt ausgewertet

=== 13.09.2011 ============================================================================
 - Version........: 2.0843 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Description....: Wenn beim Import eine Exception auftritt so wird diese
                    am Ende es Imports ausgegeben 
                    Meldung: [EXP: while Import Object:#IrCliNameFromSiteIdPuiDForOutput#]

=== 13.09.2011 ============================================================================
 - Version........: 2.0843 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 

=== 04.09.2011 ============================================================================
 - Version........: 2.0809 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: Ver.Info 
 - Description....: Aenderung:MCS Report Parsing Ã¼berarbeitet

=== 04.09.2011 ============================================================================
 - Version........: 2.0809 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: Ver.Info 
 - Description....: Aenderung:MCS Report Parsing überarbeitet

=== 03.09.2011 ============================================================================
 - Version........: 2.0808 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Description....: Import Performance Optimiert hierzu wurden
                     - Abgleich Methoden zum holen der Daten aus der JS DB verbessert.
                     - IR Daten werden jetzt nur noch beim ersten Dataset 'Importiert-Updatet' 
                       wenn weitere Datasets der IR importiert werden so entfällt der 'Importiert-Updatet' der IR Daten.

=== 30.08.2011 ============================================================================
 - Version........: 2.0803 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Description....: Sync.Site.Data: Es wird jetzt auch verglichen ob IrOwningSite zwischen in TC.DB und JM.DB abweichend. 
                    Wenn ja dann werden die Daten dieser IR updatet

=== 26.08.2011 ============================================================================
 - Version........: 2.0800 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: Aenderung:

=== 22.08.2011 ============================================================================
 - Version........: 2.0797 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 

=== 27.06.2011 ============================================================================
 - Version........: 2.0786 // J.Fes
 - Categorie......: ObjectJobResults Settings 
 - Additional Info: Ver.Info 
 - Description....: + New.Settings(Scripts)in generischen JobResult Files können jetzt
                    - an 7.ter Stelle der Parameter /SiteId mitgegeben werden Example:/SiteId=tceng
                    Der Wert gibt an von welcher Site die ObjectDaten stammen

=== 27.06.2011 ============================================================================
 - Version........: 2.0786 // J.Fes
 - Categorie......: ObjectJobResults Settings 
 - Additional Info: Ver.Info 
 - Description....: + New.Settings(Scripts)in generischen JobResult Files können jetzt
                    - an 7.ter Stelle ObjectClass mitgegeben werden /ObjectClass=DS oder IR
                    Der Wert gibt an ob das Object ein IR oder DS Objct ist

=== 27.06.2011 ============================================================================
 - Version........: 2.0786 // J.Fes
 - Categorie......: ObjectJobResults Settings 
 - Additional Info: Ver.Info 
 - Description....: + New.Settings(Scripts)In generischen JobResult Files können jetzt
                    - an 7.ter Stelle ProcessProcStateCol mitgegeben werden /ProcessProcStateCol=ProcStateCol01..ProcStateCol10..ProcStateColRf
                     Der Wert gibt an unter welcher Processgruppe das Ergebniss gespeichert werden soll.

=== 27.06.2011 ============================================================================
 - Version........: 2.0787 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Type...........: New: 
 - Description....: Es ist jetzt moeglich das die Ergebnisse von Refile Prozessen
                    und von weiteren Generischen Prozessen gleichzeitig eingelesen werden können.

=== 25.06.2011 ============================================================================
 - Version........: 2.0782 // J.Fes
 - Additional Info: Ver.Info 
 - Description....: IrInfoResolve_2011_06 erstellt

=== 18.06.2011 ============================================================================
 - Version........: 2.0780 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: JobControl --> Job Computers: --> C.works for Site Werte können jetzt via IN-LIST (TCSite1TCSite2) angegeben werden

=== 13.06.2011 ============================================================================
 - Version........: 2.0771 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Description....: Buttom:Sync.Site.Data Updatet jetzt alle Irs + Datasets bei dem Ir.LastModDate 
                    zwischen Tc und JobMgr Db um 60 sec abweicht. Wenn ja dann werden die Daten dieser IR updatet

=== 13.06.2011 ============================================================================
 - Version........: 2.0771 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Description....: Neuer Start Buttom:Syn.Site.Data im Register:[Sites/Data Import] eingefuegt

=== 13.06.2011 ============================================================================
 - Version........: 2.0771 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Description....: TC data containing "'" char in ItemId or IrId or in any names 
                    are now imported to JM.DB.

=== 11.04.2011 ============================================================================
 - Version........: 2.0760 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: Es kann jetzt festgelegt werden ob abweichungen beim ViewOutOfDateStatus als Error 
                    oder als Warning gewertet werden soll"

=== 30.03.2011 ============================================================================
 - Version........: 2.0756 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Analysiert jetzt auch: Warning: 'Validation was skipped during conversion because referenced data was not loaded'
                     Alle Zeilen die convert_mcs Warning: * beinhalten"

=== 30.03.2011 ============================================================================
 - Version........: 2.0756 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Refile analysiert MC to AC konvertierung
                    Optimierung der Ausgaben.
                    Analysiert jetzt auch: Warning: 'Validation was skipped during conversion because referenced data was not loaded'
                     Alle Zeilen die convert_mcs Warning: * beinhalten

=== 07.03.2011 ============================================================================
 - Version........: 2.0748 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: UpdDb=Yes Ver.Info Check.Settings 
 - Description....: es steht unter den Sites/Dataimport eine Methode zur verfügung um Oracle Tabellen unter alternativen user abfragen zu können.
                     Hierfür steht das Feld Ora.TblNam.InfodbaReplace

=== 25.02.2011 ============================================================================
 - Version........: 2.0744 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: beim Auswerten der PartHeader.CliName wird jetzt 
                    bei Native CB FileName.Ext fuer den Vergleich herangezogen

=== 12.02.2011 ============================================================================
 - Version........: 2.0735 // J.Fes
 - Categorie......: JobControl ObjectJobResults 
 - Additional Info: Ver.Info 
 - Description....: in den McsConvert LogFiles werden jetzt die Convert Sections fÃ¼r ein Part gefunden wenn z.B. folgende Namensaufbau 'Item/Rev-AnyDescription:' festgelegt wurde.
                     siehe hierzu auch Definition in den CustomerDefaults fÃ¼r preferenc: Name=Assemblies_partDescriptiveName Value=$FILENAME

=== 12.02.2011 ============================================================================
 - Version........: 2.0735 // J.Fes
 - Categorie......: JobControl ObjectJobResults 
 - Additional Info: Ver.Info 
 - Description....: in den McsConvert LogFiles werden jetzt die Convert Sections für ein Part gefunden wenn z.B. folgende Namensaufbau 'Item/Rev-AnyDescription:' festgelegt wurde.
                     siehe hierzu auch Definition in den CustomerDefaults für preferenc: Name=Assemblies_partDescriptiveName Value=$FILENAME

=== 17.01.2011 ============================================================================
 - Version........: 2.0725 // J.Fes
 - Categorie......: GUI Settings 
 - Additional Info: UpdDb=No 
 - Description....: der aktive Debug Modus wird jetzt in der Regestrie gepseichert und ist nicht mehr abhänig von MyAppl_Settings.ServerSettings.JobServer_LogOnOff
                    Info: MyAppl_Settings.ServerSettings.JobServer_LogOnOff wurde entfernt

=== 29.12.2010 ============================================================================
 - Version........: 2.0713 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: DataSetType erweitert um: CAESOLUTIONCAEMESHCAEGEOM

=== 07.12.2010 ============================================================================
 - Version........: 2.0708 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info 
 - Description....: es kann jetzt festgelegt werden ob Komponenten mit Attribut UG_Geometry=NO miteinander verglichen werden sollen\wenn Me.Settings.AssemblyUG_GeometryNO_DoCompare
                    -true=Komponenten vergleichen
                    -false=Komponenten wird nicht verglichen (skip)

=== 25.11.2010 ============================================================================
 - Version........: 2.0705 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: Ver.Info 
 - Description....: wenn bei einem GenericProcess ein .\_convert_mcs.log file enthalten ist so wird dieser automatisch ausgewertet

=== 18.11.2010 ============================================================================
 - Version........: 2.0702 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Objecte können jetzt auch über ObjectCreateDate gesucht werden

=== 27.10.2010 ============================================================================
 - Version........: 2.0697 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: legt die Liste der Modeldata Refset Namen fest die nicht verglichen werden sollen

=== 25.10.2010 ============================================================================
 - Version........: 2.0695 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Description....: Check.Settings;"die Parthistory's werden ausgewertet.
                    Die Auswertung erfolgt durch vergleichen der Speicherversionen.
                    Der Parthistory Check gilt dann als bestanden wenn die Daten die mit der neueren Version 
                    ermittelt wurden mindestens den mit dem gleichen Versionstand gespeichert wurden wie 
                    die Daten die mit der VorgÃ¤ngerversion ermittelt wurden.
                    
                    Regel: Wird ein Parthstory Error erkannt so wird das Part Automatisch auf exclude gesetzt.
                    Siehe hierzu auch Settings.CheckBox CheckBoxPartHistoryCheck_AsErr"

=== 18.10.2010 ============================================================================
 - Version........: 2.0690 // J.Fes
 - Categorie......: Reports 
 - Additional Info: UpdDb=Yes Ver.Info 
 - Description....: Report Layout und Print Engine implementiert

=== 14.09.2010 ============================================================================
 - Version........: 2.686 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: wenn der JobLink Button angeklickt wird und während dessen die shift Taste gedrückt wird öffnet sich der Exporer im Verzeichniss in dem das Dokument liegt und selectiert dieses.

=== 14.09.2010 ============================================================================
 - Version........: 2.0686 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: wenn der JobLink Button angeklickt wird und während dessen die shift Taste gedrückt wird öffnet sich der Exporer im Verzeichniss in dem das Dokument liegt und selectiert dieses.

=== 03.09.2010 ============================================================================
 - Version........: 2.0678 // J.Fes
 - Categorie......: Settings CheckBox 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: umfangreiche anpassungen durchgefÃ¼hrt um die Vergleiche beim Kunden auf die Version angemessen einstellen zu kÃ¶nnen"

=== 01.09.2010 ============================================================================
 - Version........: 2.0676 // J.Fes
 - Categorie......: Scripts/Params. 
 - Additional Info: Ver.Info 
 - Description....: Neue Gittervariablen #TcUser# und #TcUserPassword# verfuegbar

=== 30.08.2010 ============================================================================
 - Version........: 2.0675 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Reboot des JobClients kann jetzt durch den JobServer ausgelöst werden.

=== 30.08.2010 ============================================================================
 - Version........: 2.0675 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: der JobClient kann jetzt via ctr+f FinishAndQuit oder via ctr+c FinishAndReboot beendet werden\Info via c kann innerhalb von 60sec der bootvorgang abgebrochen werden

=== 10.08.2010 ============================================================================
 - Version........: 2.0668 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Description....: es kann jetzt festgelegt werden ob AP's(Baugruppen) mit 0 Komponenten als SP(Einzelteil) gewertet werden.
                     siehe:Sites/Data Import 'Imp.Ap wi.CompN=0 As Sp'
                     #Info: alle Default einstellung AP=0 als AP werten bleiben bestehen."

=== 02.08.2010 ============================================================================
 - Version........: 2.666 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Beim import via Objects (DS/IRS)->Extras->Import datasets..
                    können jetzt auch mehrere IR's angegeben werden!

=== 28.07.2010 ============================================================================
 - Version........: 2.661 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: Ver.Info 
 - Description....: wenn IR und BOM Strukturen importiert werden wird nach dem Import das Ergebniss mit angezeigt

=== 28.07.2010 ============================================================================
 - Version........: 2.0661 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: Ver.Info 

=== 28.07.2010 ============================================================================
 - Version........: 2.0661 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: Ver.Info 

=== 28.07.2010 ============================================================================
 - Version........: 2.0661 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: Ver.Info 

=== 28.07.2010 ============================================================================
 - Version........: 2.0661 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: Ver.Info 

=== 28.07.2010 ============================================================================
 - Version........: 2.0661 // J.Fes
 - Categorie......: Import Sites/Data Import ObjectList 
 - Additional Info: Ver.Info 
 - Description....: wenn IR und BOM Strukturen importiert werden wird nach dem Import 
                    das Ergebnis mit angezeigt

=== 21.07.2010 ============================================================================
 - Version........: 2.0658 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: die Vorgaben für die Zeitsteuerungen wurden für das den JobClient angepasst

=== 15.07.2010 ============================================================================
 - Version........: 2.0652 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: JobScript gets now folowing parameter transfered
                    - %~1 TcUser 
                    - %~2 TcPassword

=== 09.07.2010 ============================================================================
 - Version........: 2.0635 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: JobComputer's Spaltenüberschriften überarbeitet

=== 09.07.2010 ============================================================================
 - Version........: 2.0634 // J.Fes
 - Categorie......: Settings 
 - Additional Info: UpdDb=Yes 
 - Description....: neue #Var
                    #JobComputers_tbl.Custom01# .. User02#

=== 09.07.2010 ============================================================================
 - Version........: 2.0634 // J.Fes
 - Categorie......: Settings 
 - Additional Info: UpdDb=Yes 
 - Description....: neue #Var
                    #JobComputers_tbl.ComputerFQDN#

=== 19.06.2010 ============================================================================
 - Version........: 2.0627 // J.Fes
 - Categorie......: Scripts/Params. 
 - Additional Info: Ver.Info 
 - Type...........: Change: 
 - Description....: ScriptEditor Projektfile wurde evtl. falsch gesucht
                    Issue is now solved by code changes

=== 03.06.2010 ============================================================================
 - Version........: 2.0623 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: JobComputersScript_Execute
                    wird jetzt mit AppWinStyle.NormalFocus ausgeführt

=== 02.06.2010 ============================================================================
 - Version........: 2.0621 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Check.Settings 
 - Description....: JobClient_ReceiveCmdTimeOut default set to min 10 sec Default=120

=== 02.06.2010 ============================================================================
 - Version........: 2.0621 // J.Fes
 - Categorie......: CheckBox 
 - Additional Info: Ver.Info 
 - Description....: Entities 26 (dimension) text compair added.

=== 11.05.2010 ============================================================================
 - Version........: 2.0616 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: NXsimulation eingefügt

=== 04.05.2010 ============================================================================
 - Version........: 2.0614 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: All converted constraints in this part where suppressed as they could not solve
                    Ein Objekt bei dem ein "Validation failed" kommt 
                    wird das Objekt wie folgt gekennzeichnet:
                     - .ProcessResultHasWarning = True 
                     - P.ResultMess: "Rf.MC Convert Warning:[02]:[All converted constraints in this part were suppressed as they could not solve]
                    Info: Analyse wird nur ausgefuehrt wenn der Refile mit Done und Error=0 durchgefÃ¼hrt wurde!"

=== 04.05.2010 ============================================================================
 - Version........: 2.0614 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: All converted constraints in this part were suppressed as they could not solve
                    Ein Objekt bei dem ein Validation failed kommt 
                    wird das Objekt wie folgt gekennzeichnet:
                     - .ProcessResultHasWarning = True  
                     - P.ResultMess: Rf.MC Convert Warning:[02]:[All converted constraints in this part were suppressed as they could not solve]
                    Info: Analyse wird nur ausgefuehrt wenn der Refile mit Done und Error=0 durchgeführt wurde!

=== 23.04.2010 ============================================================================
 - Version........: 2.0606 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Suchfilter erweitert um Sucheigenschaft Proccesed.On.Compuer

=== 15.04.2010 ============================================================================
 - Version........: 2.0600 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: in all script files that are located in the JobScript directory and files having the extensions *.cmd;*.bat;*.ps1;*.pl;*.txt
                    the #GitterVar# are replaced

=== 25.03.2010 ============================================================================
 - Version........: 2.0591 // J.Fes
 - Categorie......: GUI Import ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Object Daten können über: [Object's having Import Error's] aufgelistet werden

=== 25.03.2010 ============================================================================
 - Version........: 2.0591 // J.Fes
 - Categorie......: GUI ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Object Daten können über: [Object's having FS HitCount's >0] aufgelistet werden

=== 23.03.2010 ============================================================================
 - Version........: 2.0589 // J.Fes
 - Categorie......: TaskScheduler 
 - Additional Info: Ver.Info 
 - Description....: wenn die Objekte eines Task's keine 'UGMASTER' Objekte beinhaltet wird sofort Proc_NonMaster geschaltet.
                    Vorteil: NonMaster Objete werden dann gleich bearbeitet.
                    Info diese Regel wird nur dann beachtet wenn die zugehörige Prozessgruppe die Einstellung JobServerObject_UGMaster_Befor_UGNonMaster=true eingestellt wurde

=== 23.03.2010 ============================================================================
 - Version........: 2.0589 // J.Fes
 - Categorie......: TaskScheduler 
 - Additional Info: Ver.Info 
 - Description....: wiederhol Task's werden jetzt korrekt ausgeführt

=== 18.03.2010 ============================================================================
 - Version........: 2.0588 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Gitter Variablen erweitert es stehen jetzt folgende Variablen zur verfügung
                    -JobRule.SelObjectsBy_* 
                    -#JobRule.TimeSchedule# 
                    -#JobRule.validForComputer#

=== 22.01.2010 ============================================================================
 - Version........: 2.0520 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Refile analysiert MC to AC konvertierung
                    gibt die Details des betroffen Subsection aus

=== 22.01.2010 ============================================================================
 - Version........: 2.0520 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Refile analysiert MC to AC konvertierung
                    gibt die Details des betroffen Subsection aus

=== 18.01.2010 ============================================================================
 - Version........: 2.0566 // J.Fes
 - Categorie......: ProcessGroups Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: In den ProcessGroups können Rechte Bedingungen vergeben werden wer diese ProcessGroup im JobPlaner angezeigt bekommt
                    siehe:JobServer Process Groups->ProcessGroup01..->UserAcceesRules.."

=== 14.01.2010 ============================================================================
 - Version........: 2.0565 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Wird ein freies SQL Script für die Objekt selection verwendet so können jetzt 
                    Gittervariablen mit verwendet werden.
                    Bspl.:#TcSiteId#=Site #ProcStateVal#=StartVal (N,M,A..)

=== 14.01.2010 ============================================================================
 - Version........: 2.0565 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Gitter Variablen erweitert es stehen jetzt folgende Variablen zur verfügung
                    -#ProcStateCol# ProcStateCol01..20 + Rf
                    -#ProcStateVal# Start M,N,A
                    -#ObjectType# UGMASTER..
                    -#ObjectClass# DS IR"

=== 06.01.2010 ============================================================================
 - Version........: 2.0560 // J.Fes
 - Categorie......: ObjectJobResults Settings 
 - Additional Info: Ver.Info 
 - Description....: + New.Settings(Scripts)In Generischen JobResult Files können jetzt
                    - an 7.ter Stelle JobServerExtendCommandsTrigger mitgegeben werden /ProcessStateSetTo=D.NX4
                     gibt vor welcher ProzessStatus gesetzt werden soll

=== 16.12.2009 ============================================================================
 - Version........: 2.0558 // J.Fes
 - Categorie......: TaskScheduler 
 - Additional Info: UpdDb=Yes 
 - Description....: in den Task's kann fesgelegt werden welcher Computer einen bestimmten Task ausfuehern darf wenn es nicht der JobServer Comuter selbst ist
                    Regel:Ist diese Eigenschaft leer so darf dieser Task nur vom JobServer Comuter ausgeführt werden

=== 15.12.2009 ============================================================================
 - Version........: 2.0557 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Description....: es können jetzt erweiterte JobScript Parameter einer Job-Script Paramerter definition hinterlegt werden.

=== 12.12.2009 ============================================================================
 - Version........: 2.555 // J.Fes
 - Categorie......: ObjectList Settings 
 - Additional Info: Ver.Info 
 - Description....: Object_open_via_NXRouter
                    es wurde eine Exeption aus geloest wenn UGII_ROOT_DIR und ServerSettings.UGII_ROOT_DIR_SEARCH_P nicht gesetzt waren

=== 12.12.2009 ============================================================================
 - Version........: 2.0555 // J.Fes
 - Categorie......: ObjectList Settings 
 - Additional Info: Ver.Info 
 - Description....: Object_open_via_NXRouter
                    es wurde eine Exeption aus geloest wenn UGII_ROOT_DIR und ServerSettings.UGII_ROOT_DIR_SEARCH_P nicht gesetzt waren

=== 06.12.2009 ============================================================================
 - Version........: 2.0554 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Description....: eine nicht abgefangene Exception die beim arbeiten mit der interaktiven Application auftritt wird jetzt abgefanngen und eine Meldung im jeweis aktiven Info Fenster ausgegeben

=== 10.11.2009 ============================================================================
 - Version........: 2.0550 // J.Fes
 - Categorie......: Scripting 
 - Additional Info: Ver.Info 
 - Description....: Scripting extended so that customer files can be added to the job
                    Example: JobDef.JobFiles.JobCustomFiles.JobCustomFiles.Add(New JF.PlmJobManager.JobServer.JobManager_JobControlNextPaket_cls.JobFile_cls.JobCustomFileDef_cls("TEST", ".cmd"))"

=== 05.11.2009 ============================================================================
 - Version........: 2.0549 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Objects select 'Bevor' 'After' werden jetzt vom JobControler berücksichtigt

=== 02.11.2009 ============================================================================
 - Version........: 2.0548 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Description....: in den SiteDef Connetion TimeOut Optionen ergänzt
                    -DbConnectionTimeOut [default=60]
                    -DbCommandTimeout [default=120]

=== 02.11.2009 ============================================================================
 - Version........: 2.0548 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Description....: table mapping umgestellt von:
                    -select count(*) from
                    -select top 1 * from

=== 24.10.2009 ============================================================================
 - Version........: 2.0545 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: bei den JobRoules können jetzt via !NOT! Regel Computer ausgeschlossen werden.
                    Example: via CName*!NOT!CName4CName2*
                    Info: der !NOT! Part ist dominierend.

=== 21.10.2009 ============================================================================
 - Version........: 2.0543 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: UpdDb=Yes Check.Settings 
 - Description....: in den JobRules kann jetzt festgelegt werden wie PFM Parts selectiert werden (PFM.Ignor,PFM.No,PFM.Only)

=== 16.10.2009 ============================================================================
 - Version........: 2.0541 // J.Fes
 - Categorie......: GUI ObjectList 
 - Additional Info: Ver.Info 
 - Description....: in der Oberfläche kann jetzt auch über den PFM Namen gefiltert werden\diese ermöglicht alle Parts einer PFM auflisten zu lassen

=== 24.09.2009 ============================================================================
 - Version........: 2.0538 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: SelObjectsBy_MaxComponents=0 SelObjectsBy_MinComponents=0 wird jetzt berücksichtigt
                    JobControl Regeln prüfen bezüglich SelObjectsBy_MaxComponents SelObjectsBy_MinComponents

=== 17.09.2009 ============================================================================
 - Version........: 2.0536 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Ver.Info 
 - Description....: Dir_DataRoot_DP_91JobControl neu hinzugefügt
                     in diese Verzeichniss sind JobControls Files abzulegen
                     Einsatzbeispiel: Ablage von JobFiles die via JobServerScripte verarbeitet werden

=== 24.08.2009 ============================================================================
 - Version........: 2.0534 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Description....: Beim importieren der Daten aus TC in die JM.DB wird berücksichtigt 
                    das Datum und Zeit von IContr:Ir.ModDateBegin nicht vor dem Start des Importbegins liegt.

=== 24.08.2009 ============================================================================
 - Version........: 2.0534 // J.Fes
 - Categorie......: ObjectJobResults Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: (Scripts)Aus Generischen JobResult Files kann jetzt\- an 6.ter Stelle ein JobLink mitgegeben werden

=== 24.08.2009 ============================================================================
 - Version........: 2.0534 // J.Fes
 - Categorie......: ObjectJobResults Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: (Scripts)Aus Generischen JobResult Files kann jetzt
                    - an 5.ter Stelle angegeben werden ob das Ergebniss ein Warning hat (true or 1=has warning) (false or 0=no warning)

=== 14.08.2009 ============================================================================
 - Version........: 2.0532 // J.Fes
 - Categorie......: Install and Setup DB 
 - Additional Info: UpdDb=Yes 
 - Description....: Optimice DB ReOrg. Datenbank Maintain eingebaut
                    Siehe Extras->Setup->Setup Database->Database Maintain->23 - Optimice DB (compress DB and Reorg. Indices via OSQL)

=== 12.08.2009 ============================================================================
 - Version........: 2.0531 // J.Fes
 - Categorie......: Install and Setup DB 
 - Additional Info: UpdDb=Yes 
 - Description....: Optimice DB Indices in Datenbank Maintain eingebaut
                    Siehe Extras->Setup->Setup Database->Database Maintain->22 - Optimice Index (Reorg. Indices via OSQL)

=== 12.08.2009 ============================================================================
 - Version........: 2.0531 // J.Fes
 - Categorie......: Install and Setup 
 - Additional Info: Ver.Info 
 - Description....: neuer Schater Upgrade Database erstellt
                    Siehe Extras->Setup->Setup Database->Database Setup->Database Upgrade Database

=== 21.07.2009 ============================================================================
 - Version........: 2.0528 // J.Fes
 - Categorie......: DB Import Sites/Data Import 
 - Additional Info: Ver.Info 
 - Description....: Es wurde ein neuer Schalter für das testen der Verbindung zur TC DB erstellt

=== 17.07.2009 ============================================================================
 - Version........: 2.0527 // J.Fes
 - Categorie......: Install and Setup 
 - Additional Info: Ver.Info 
 - Description....: der installation für den SQL Server wurde der aktuelle Stand der Microsoft SqlSever Express 2005 (Service Pack 3) hinzugefügt
                    Info: dieses kann für 32-Bit und 64-Bit installationen verwendet werden

=== 17.07.2009 ============================================================================
 - Version........: 2.0527 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: Check.Settings 
 - Description....: Sites/Data Import Ora.Bin jetzt für 32+64 bit version verwendbar
                    Settings wird im Feld Ora.Bin 'AUTO' eingegben so werden dem Suchpathd die Pfade der 32bit (..03-BinPublic\OraClient\32Bit) und 64bit (..03-BinPublic\OraClient\64Bit) DLL Verzeichnisse eingefügt.

=== 17.07.2009 ============================================================================
 - Version........: 2.0527 // J.Fes
 - Categorie......: Import Sites/Data Import Settings 
 - Additional Info: Check.Settings 
 - Description....: Sites/Data Import Ora.Bin jetzt für 32+64 bit version verwendbar
                    Settings wird im Feld Ora.Bin 'AUTO' eingegben so werden dem Suchpathd die Pfade der 32bit (..03-BinPublic\OraClient\32Bit) und 64bit (..03-BinPublic\OraClient\64Bit) DLL Verzeichnisse eingefügt.

=== 12.07.2009 ============================================================================
 - Version........: 2.526 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Job Links können über die Oberfläche geöffnet werden

=== 12.07.2009 ============================================================================
 - Version........: 2.0526 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: UpdDb=Yes 
 - Description....: Ein ObjectJobErgebniss als Warning kennzeichnen
                    wenn ein Job zu einem Objekt ein Warning hat dann kann dieser dem Object Job Ergebniss hinzugefügt werden (value=true/false) (Bspl. MC-AC-Convert)

=== 12.07.2009 ============================================================================
 - Version........: 2.0526 // J.Fes
 - Categorie......: ObjectJobResults 
 - Additional Info: UpdDb=Yes 
 - Description....: Link zu ObjectJobResult eingefügt
                    dieser Link wird genutzt um Verweise zu JobErgebnissen zu organiesieren (Bspl. MC-AC-Convert)
                    Develoment Hint use: JobLog_lnkGen(Results_fp.FileDef.File_DPNE)

=== 12.07.2009 ============================================================================
 - Version........: 2.0526 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Job Links können über die Oberfläche geöffnet werden

=== 12.07.2009 ============================================================================
 - Version........: 2.0526 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: suchen über Process Warnings in den Object Process Listen ergänzt

=== 03.07.2009 ============================================================================
 - Version........: 2.0525 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: UpdDb=Yes 
 - Description....: selection der Komponenten kann jetzt auch über die APLevels ausgeführt werden
                    Hierfür wurden folgende Felder erstellt:
                    -SelObjectsBy_MaxApLevels
                    -SelObjectsBy_MinApLevels

=== 02.07.2009 ============================================================================
 - Version........: 2.0524 // J.Fes
 - Additional Info: Ver.Info 
 - Description....: in der Dialogbox für das NX-Refile werden jetzt die gewählten Optionen nach dem drücken von OK korrekt übernommen

=== 24.06.2009 ============================================================================
 - Version........: 2.0522 // J.Fes
 - Categorie......: Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: clear this inputfield to get the default

=== 24.06.2009 ============================================================================
 - Version........: 2.0522 // J.Fes
 - Categorie......: Settings 
 - Additional Info: Ver.Info Check.Settings 
 - Description....: clear this inputfield to get the default

=== 21.06.2009 ============================================================================
 - Version........: 2.0521 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Extentet Replacment Variables
                    -#TcSite.Id#
                    -#TcSite.DBNetworkAlias#
                    -#TcSite.DBProvider#
                    -#TcSite.OracleBin#
                    -#TcSite.OracleHome#
                    -#TcSite.pName#
                    -#TcSite.Tns_Admin#
                    -#TcSite.UserName#
                    -#TcSite.SiteAktive_bol#
                    -#TcSite.pSite_ID#
                    -#TcSite.pName#
                    -#TcSite.ImportIrLastModDateBegin#
                    -#TcSite.ImportIrLastModDateEnd#
                    -#TcSite.ImportIrLastRelDateBegin#
                    -#TcSite.NativeRoot_DP#
                    -#TcSite.NativeMaskAp#
                    -#TcSite.NativeFileSysUsing_bol#
                    -#TcSite.NativeFileMaskExclude#
                    -#TcSite.NativeFileMaskInclude#
                    -#TcSite.SiteInfoWith_SiteId_and_pName#"

=== 21.06.2009 ============================================================================
 - Version........: 2.0521 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Extentet Replacment Variables
                    -#TcSite.Id#
                    -#TcSite.SolutionType#
                    -#TcSite.DBNetworkAlias#
                    -#TcSite.DBProvider#
                    -#TcSite.OracleBin#
                    -#TcSite.OracleHome#
                    -#TcSite.pName#
                    -#TcSite.Tns_Admin#
                    -#TcSite.UserName#
                    -#TcSite.SiteAktive_bol#
                    -#TcSite.pSite_ID#
                    -#TcSite.pName#
                    -#TcSite.ImportIrLastModDateBegin
                    -#TcSite.ImportIrLastModDateEnd
                    -#TcSite.NativeRoot_DP#
                    -#TcSite.NativeMaskAp#
                    -#TcSite.NativeFileSysUsing_bol#
                    -#TcSite.NativeFileMaskExclude#
                    -#TcSite.NativeFileMaskInclude#
                    -#TcSite.SiteInfoWith_SiteId_and_pName#"

=== 18.06.2009 ============================================================================
 - Version........: 2.0520 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Ein Objekt bei dem ein "Validation failed" kommt 
                    wird das Objekt wie folgt gekennzeichnet:
                     - .ProcessResultHasWarning = True  
                     - P.ResultMess: "Rf.MC Convert Warning:[01]:[Validation failed after constraint conversion]
                    Info: Analyse wird nur ausgefuehrt wenn der Refile mit Done und Error=0 durchgefÃ¼hrt wurde!"

=== 18.06.2009 ============================================================================
 - Version........: 2.0520 // J.Fes
 - Categorie......: JobControl 
 - Additional Info: Ver.Info 
 - Description....: Refile analysiert MC to AC konvertierung
                    Ein Objekt bei dem ein Validation failed kommt 
                    wird das Objekt wie folgt gekennzeichnet:
                     - .ProcessResultHasWarning = True  
                     - P.ResultMess: Rf.MC Convert Warning:[01]:[Validation failed after constraint conversion]
                    Info: Analyse wird nur ausgefuehrt wenn der Refile mit Done und Error=0 durchgeführt wurde!

=== 16.06.2009 ============================================================================
 - Version........: 2.0520 // J.Fes
 - Categorie......: DB 
 - Additional Info: UpdDb=Yes 
 - Description....: funktionen fuer die verwaltung des Updates der Datenbanken eingefuehrt
                     verfügbare funktionen:
                    - zzzzDbMaintain_valueGet
                    - zzzzDbMaintain_valueSave

=== 29.04.2009 ============================================================================
 - Version........: 2.0517 // J.Fes
 - Categorie......: JobControl TaskScheduler 
 - Additional Info: Ver.Info 
 - Description....: - #JobPlaner_ProcessStepControl#
                    - #JobPlaner_TimeSchedule#
                    - #JobPlaner_Name#
                    - #JobPlaner_NameDescription#
                    - #JobPlaner_Description#
                    - #JobPlaner_Note#
                    - #JobPlaner_Order#
                    - #JobPlaner_ProcessLastMsg#
                    - #JobPlaner_ProcessLastRunEnd#
                    - #JobPlaner_ProcessLastRunStart#
                    - #JobPlaner_ProcessObjectsProcStateCol#
                    - #JobPlaner_ProcessState#
                    - #JobPlaner_ProcessStepControl#
                    - #JobPlaner_ProcessType#
                    - #JobPlaner_ReDo#"

=== 20.04.2009 ============================================================================
 - Version........: 2.0512 // J.Fes
 - Categorie......: JobControl Settings 
 - Additional Info: Check.Settings 
 - Description....: JobServerGenNewJobTimeOut eingefuegt Info:Setzt die Timeoutzeit die der JobClient max wartet bis das der JobServer ein neuen Job erstellt hat

=== 20.04.2009 ============================================================================
 - Version........: 2.0512 // J.Fes
 - Additional Info: Ver.Info 
 - Description....: :Bugfixder JobClient beendet sich nicht mehr, wenn der JobServer während der JobPaket generierung die Verbindung beendet!

=== 14.04.2009 ============================================================================
 - Version........: 2.0512 // J.Fes
 - Categorie......: TaskScheduler 
 - Additional Info: UpdDb=Yes 
 - Description....: der Tabelle:'TaskScheduler_tbl' wurde das Feld:'ProcessStepControl' hinzugefügt

=== 14.04.2009 ============================================================================
 - Version........: 2.0512 // J.Fes
 - Categorie......: ProcessGroups 
 - Additional Info: Ver.Info 
 - Description....: ueber die P.Gr kann jetzt gesteuert werden ob die UGMaster Objekte vor den UgNonMaster Objekten verarbeitet werden sollen.,
                    Hierdurch können die UGMaster Objekte vor den NonMaster Objekten verarbeitet werden!

=== 14.04.2009 ============================================================================
 - Version........: 2.0512 // J.Fes
 - Categorie......: Import ProcessGroups Refactoring 
 - Additional Info: Ver.Info 
 - Description....: JobServerObjectImportNewStatusSetTo ist jetzt als default=N,
                    bei Bestandskunden (vor 14.04.2009) P.Gr.Editieren und Status der Objekte ändern von X auf N

=== 13.03.2009 ============================================================================
 - Version........: 2.0506 // J.Fes
 - Additional Info: Ver.Info 
 - Description....: /IRIds_ObjectNames dient zur Ã¼bergabe der IR's aus dem TCE heraus

=== 08.03.2009 ============================================================================
 - Version........: 2.0505 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Objekte können jetzt nach Assemply Levels gegiltert werden

=== 03.03.2009 ============================================================================
 - Version........: 2.0505 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: Ver.Info 
 - Description....: Es kann jetzt nach Site und Remote Objects gelistet werden (R+S,S,R)

=== 24.02.2009 ============================================================================
 - Version........: 2.0504 // J.Fes
 - Categorie......: ObjectList 
 - Additional Info: UpdDb=Yes 
 - Description....: Suchen ueber Last Result Optimiert

=== 16.02.2009 ============================================================================
 - Version........: 2.0504 // J.Fes
 - Categorie......: Import 
 - Additional Info: Ver.Info 
 - Description....: Default fuer Import Reconnet angepasst WaitTime=10Sec RetrysMax=3000

=== 16.02.2009 ============================================================================
 - Version........: 2.0504 // J.Fes
 - Categorie......: Import 
 - Additional Info: UpdDb=Yes 
 - Description....: Beim importieren der Daten aus TC in die JM.DB wird automatisch 
                    Datum und Zeit von IContr:Ir.ModDateBegin auf die jüngste erfolgreich importierte IR gesetzt

=== 14.02.2009 ============================================================================
 - Version........: 2.0504 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Description....: ]es wird ein neues Logo in SplashScreen angezeigt Vorteil die Grafik ist einfacher Start bei Remote Umgebung besser

=== 23.01.2009 ============================================================================
 - Version........: 2.0421 // J.Fes
 - Categorie......: GUI 
 - Additional Info: Ver.Info 
 - Description....: die Daten der Spalte [ProcessResultCode] werden in abhänikeit von ihrem Wert eingefärbt
                     -Wert=0 Grün
                     -Wert>0 Rot
                     -Wert<=0 Orange
                     -Wert=leer weiss

=== 11.12.2008 ============================================================================
 - Version........: 2.0411 // J.Fes
 - Categorie......: Import Sites/Data Import 
 - Additional Info: UpdDb=Yes 
 - Description....: Abfrage für die ermittlung des RelaseStatus und Datums

